EN ISO 13805-2009 en Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)《铝用釉.pdf

《EN ISO 13805-2009 en Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)《铝用釉.pdf》由会员分享，可在线阅读，更多相关《EN ISO 13805-2009 en Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)《铝用釉.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN ISO 13805: 9 ICS 25

2、.220.50 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Vitreous and porcelain enamels for aluminium Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) 200This British Standard, having been prepared under the direction

3、of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 January 2000 BSIBS ISO 13805: 9 Amendments issued since publication National foreword The UK participation in its preparation was entrusted to Technical Commi

4、ttee STI/36, Vitreous enamel coatings. A list of organizations represented on this committee can be obtained on request to its secretary. Compliance with a British Standard confer immunity from legal obligations. EN 200 cannot This publication does not purport to include all the necessary provisions

5、 of a contract. Users are responsible for its correct application. This British Standard is the UK implementation of EN ISO 13805:2009. It is identical with ISO 13805:1999. It supersedes BS ISO 13805:1999 which is withdrawn.2009ISBN 978 0 580 63559 5 Date Comments This corrigendum renumbers BS ISO 1

6、3805:1999 as BS EN ISO 13805:2009 31 May 2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13805 January 2009 ICS 25.220.50 English Version Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall

7、 test) (ISO 13805:1999) maux vitrifis dposs sur laluminium - Dtermination de ladhrence laide dun lectrolyte (essai dcaillage) (ISO 13805:1999) Aluminium-Emails - Bestimmung der Haftung von Aluminium-Emails unter Einwirkung von Elektrolytlsungen (ISO 13805:1999) This European Standard was approved by

8、 CEN on 13 December 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stan

9、dards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified

10、to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

11、Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2009 CEN All rights of exploi

12、tation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 13805:2009: EEN ISO 13805:2009 (E) Foreword The text of ISO 13805:1999 has been prepared by Technical Committee ISO/TC 107 “Metallic and other inorganic coatings” of the International Organization for St

13、andardization (ISO) and has been taken over as EN ISO 13805:2009 by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or b

14、y endorsement, at the latest by July 2009, and conflicting national standards shall be withdrawn at the latest by July 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for iden

15、tifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gre

16、ece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 13805:1999 has been approved by CEN as a EN ISO 13805:2009 without an

17、y modification. ii BS EN ISO 13805:2009 ISO iii Introduction BS Thespallingofporcelainenamelledaluminium,adefectcharacterizedbyseparationoftheporcelainenamelfrom thealuminiumbasematerial,iscausedbypooradhesion.Thespalltestisthereforecapableofcontrollingthe qualityoftheenamellingprocessincludingtheen

18、amelformulation,thepreparationofthebasemetalpriorto enamelling,theapplicationandfiringprocedures,andthealuminiumalloyselectedforenamelling. EN ISO 13805:2009 (E) EN ISO 13805:2009 INTERNATIONALSTANDARD ISO ISO13805:1999(E) 1 Vitreousandporcelainenamelsforaluminium Determinationoftheadhesionofenamels

19、onaluminium undertheactionofelectrolyticsolution(spalltest) 1Scope ThisInternationalStandardspecifiesatestmethodfortheaccelerateddeterminationoftheresistanceofporcelain enamelcoatingsonaluminiumandaluminiumalloystospallingasaresultofexposuretomoistureorweathering. Becausespallingiscausedbythelackofa

20、dhesionbetweenthecoatingandthebasemetal,thespalltestisatest ofadhesion.Thegreatertheextentofspallinginthistest,thegreaterthelikelihoodthatthearticlewillspallin service. 2Normative references Thefollowingnormativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsof thisIn

21、ternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthese publicationsdonotapply.However,partiestoagreementsbasedonthisInternationalStandardareencouragedto investigatethepossibilityofapplyingthemostrecenteditionsofthenormativedocumentindicatedbelow.For undatedreferences,

22、thelatesteditionofnormativedocumentreferredtoapplies.MembersofISOandIECmaintain registersofcurrentlyvalidInternationalStandards. IS03819, LaboratoryglasswareBeakers . ISO4788, LaboratoryglasswareGraduatedmeasuringcylinders. ISO10141, VitreousandporcelainenamelsVocabulary. ISO13805, Vitreousandporcel

23、ainenamelsonaluminiumProductionofspecimensfortesting. 3 Termsanddefinitions ForthepurposesofthisInternationalStandard,thetermsanddefinitionsgiveninISO10141apply. 4Principle Ascoredenamelledaluminiumspecimenisexposedtoanaqueoustestsolutionconsistingofantimonytrichloride, SbCl 3 ,havingaconcentrationo

24、f10g/I,atanambienttemperatureof18 O Cto28 O Cfor20h. 5Designation Thetestmethodforthedeterminationoftheadhesionofenamelcoatingsonaluminiumandaluminiumalloysby meansofthespalltestdescribedinthisInternationalStandardshallbedesignatedasfollows: TestISO13805ISO 2 6Apparatus 6.1Balance . 6.2 Graduatemeas

25、uringcylinder, withacapacityof1000mlinaccordancewithISO4788. 6.3Beaker,inaccordancewithISO3819or plasticvessel ofsuitablesize. 6.4 Plasticorglasshook, orstand, forholdingthespecimeninthetestsolution. 6.5Viscose sponge . 6.6File . 6.7Steel needle . 7Reagents 7.1Test solution Thetestsolutionshallbeana

26、queoussolutionoftechnicalgradeantimonytrichloride,SbCl 3 ,withaconcentrationof 10g/l. Preparethetestsolutionbydissolving10gofantimonytrichloride,SbCl 3 ,in1000mlofdistilledordemineralized waterandstircontinuously. NOTE Hydrochloricacidandawhiteprecipitateconsistingofamixtureofantimoniousoxychloride,

27、SbOCl,andantimony trioxide,Sb 2 O 3 ,willbeformed.Theprecipitateisanintegralpartofthetestsolution. Antimonytrichlorideishygroscopic.Thereforekeepitinsealedcontainers.Donotusemoistorwetantimony trichloride. Prepareafreshsolutionforeachtestonthesamedayasitistobeused. 7.2Cleaning solution Thecleaningso

28、lutionshallbeasodium nalkyl(C 10 C 13 )benzenesulphonatewithaconcentrationofactive substanceof0,1%dissolvedindistilledordemineralizedwater. 8Specimen 8.1Selection Thespecimenmaybeacommerciallyavailablearticleorapartofit.Alternatively,itmaybeaspeciallyprepared specimeninaccordancewithISO13804. 8.2Pre

29、paration Prepareatleastonecutedgeofthespecimenimmediatelypriortothetest.Theanglebetweenthecutedgeand thesurfaceofthespecimenshallbeapproximately90 O .Ifrequired,refinishthecutedgewithafile(6.6)wherethe filingdirectionshallbefromenameltometal.Wetthecutedgecompletelywiththetestsolution(7.1)alongitswho

30、le length. Scoreacrossalongthewholespecimensurfaceusingthesteelneedle(6.7)suchthatitextendstothebasemetal. EN ISO 13805:2009 (E) BS EN ISO 13805:2009 ISO 3 8.3Cleaning Thespecimenshallbecleanandfreeofgreaseorsimilarimpuritieswhichmayaffectthetestresults.Therefore immersethespecimeninthecleaningsolut

31、ion(7.2)atatemperatureofabout40 o Cforapproximately3min.Rinse itintapwaterandthenindistilledordemineralizedwater. 9Procedure Thequantityoftestsolutiondependsonthesizeofthespecimenandshallbeatleast3mlforeachcm 2 ofsurface area. Immersethespecimencompletelyinthetestsolution(7.1)inabeakerorplasticvesse

32、lofsuitablesize(6.3)for 20h,suspendingthespecimenbyaplasticorglasshookorbymeansofastand(6.4).Duringthistimetheambient temperatureshallbebetween18 O Cand28 O C. Thetestsolution(7.1)shallnotcomeintocontactwithanymetalotherthanthespecimen. Afterthe20htestperiod,takethespecimenoutofthetestsolution(7.1),

33、rinseitinwaterandcleanitwiththe viscosesponge(6.5)toremoveloosefragmentsofenamel.Thendrythespecimeninair. 10 Expressionofresults Examineeachspecimenvisuallyfromadistanceof250mm.Describethefollowingtypesofdamageinthetest report(seeclause11): a) anyspallareawherethebasismetalisvisible,thatislocatedmor

34、ethan3mmfromtheedgeorscoremark, andthatislongerthan25mm; b) anyspallareaonthespecimensurfacenottouchinganedgeorascoremark,thatisgreaterthan10mm 2 ; c) morethanonespallarea(evenifindividualareasarelessthan10mm 2 )perdm 2 ofthesurfacearea, disregardingpinholes. 11Test report Thetestreportshallincludet

35、hefollowinginformation: a) thetypeofspecimen; b) referencetothisIntemationalStandard,i.e.,determinedaccordingtoTestISO13805; c) thetypeofdamagethatoccurred,accordingtothecriteriaspecifiedinclause10. EN ISO 13805:2009 (E) BS EN ISO 13805:2009 blankBSI Group Headquarters 389 Chiswick High Road, London

36、 W4 4AL, UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 British Standards Institution (BSI) BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revis

37、ions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or amb

38、iguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400 BSI offers members an individual updating service called PLUS which ensures that

39、 subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: You may also buy directly using a debit/credi

40、t card from the BSI Shop on the Website http:/ In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on

41、 national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20

42、 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Inf

43、ormation regarding online access to British Standards via British Standards Online can be found at http:/ Further information about BSI is available on the BSI website at http:/. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the

44、 international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BS

45、I. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070 Email: BS EN ISO 13805: 9 200