EN ISO 11681-2-2011 en Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2 Chain-saws for tree service (Incorporates Amendment A1 2017)《林业机械 便携式链锯的.pdf

《EN ISO 11681-2-2011 en Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2 Chain-saws for tree service (Incorporates Amendment A1 2017)《林业机械 便携式链锯的.pdf》由会员分享，可在线阅读，更多相关《EN ISO 11681-2-2011 en Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2 Chain-saws for tree service (Incorporates Amendment A1 2017)《林业机械 便携式链锯的.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11681-2:2011Machinery for forestry Portable chain-saw safetyrequirements and testingPart 2: Chain-saws for tree service (ISO11681-2:2011)BS EN ISO 11681-2:2011 BRITISH

2、STANDARDNational forewordThis British Standard is the UK implementation of EN ISO11681-2:2011. It supersedes BS EN ISO 11681-2:2008 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee AGE/29, Forestry machinery.A list of organizations represented on this com

3、mittee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978 0 580 67837 0ICS 65.060.80Compliance with a British Standard cann

4、ot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11681-2 December 2

5、011 ICS 65.060.80 Supersedes EN ISO 11681-2:2008English Version Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011) Matriel forestier - Exigences de scurit et essais des scies chane portatives - Partie 2: Scies chane po

6、ur llagage des arbres (ISO 11681-2:2011) Forstmaschinen - Sicherheitstechnische Anforderungen und Prfungen fr tragbare Kettensgen - Teil 2: Kettensgen fr die Baumpflege (ISO 11681-2:2011) This European Standard was approved by CEN on 30 November 2011. CEN members are bound to comply with the CEN/CEN

7、ELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre

8、or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the of

9、ficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, S

10、lovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldw

11、ide for CEN national Members. Ref. No. EN ISO 11681-2:2011: EBS EN ISO 11681-2:2011EN ISO 11681-2:2011 (E) 3 Foreword This document (EN ISO 11681-2:2011) has been prepared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry“ in collaboration with Technical Committee

12、 CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national sta

13、ndards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO

14、11681-2:2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document

15、. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irela

16、nd, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 11681-2:2011 has been approved by CEN as a EN ISO 11681-2:2011 without any modification. BS EN IS

17、O 11681-2:2011EN ISO 11681-2:2011 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Associatio

18、n to provide one means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, complianc

19、e with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the

20、product(s) falling within the scope of this standard. BS EN ISO 11681-2:2011ISO 11681-2:2011(E) ISO 2011 All rights reserved iiiContents PageForeword ivIntroduction . v1 Scope 12 Normative references .13 Terms and definitions .24 Safety requirements and/or protective measures 34.1 General .34.2 Hand

21、les 34.3 Hand protection .34.4 Balance and holding moment 54.5 Protection against injury by kickback .54.6 Chain catcher .64.7 Spiked bumper .64.8 Chip discharge .64.9 Guide-bar cover .64.10 Engine starting device .64.11 Engine stopping device .74.12 Throttle control 74.13 Drive sprocket guard 84.14

22、 Clutch .84.15 Protection against contact with parts under high voltage .94.16 Protection against contact with hot parts 94.17 Fuel and oil systems .104.18 Exhaust gases 114.19 Chain lubrication .114.20 Chain tensioning .114.21 Attachment device 114.22 Vibration .124.23 Noise .124.24 Electromagnetic

23、 immunity 125 Information for use .135.1 Instruction handbook .135.2 Marking .165.3 Warnings 165.4 Test of labels .17Annex A (informative) Working with tree service chain-saws from rope and harness 19Annex B (informative) List of significant hazards 24Bibliography .26BS EN ISO 11681-2:2011ForewordIS

24、O (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical co

25、mmittee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electro

26、technical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the memb

27、er bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifyin

28、g any or all such patent rights.ISO 11681-2 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 17, Manually portable forest machinery.This third edition cancels and replaces the second edition (ISO 11681-2:2006), which has been technic

29、ally revised.ISO 11681 consists of the following parts, under the general title Machinery for forestry Po rtable chain-saw safety requirements and testing: Part 1: Chain-saws for forest service Part 2: Chain-saws for tree serviceISO 11681-2:2011(E)iv ISO 2011 All rights reservedBS EN ISO 11681-2:201

30、1IntroductionThis document is a type-C standard as stated in ISO 12100.The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the scope of this document.When requirements of this type-C standard are different from those which ar

31、e stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard.At the time of publication of this edition, it was not st

32、ate of the art to require that starting of the machine would be always possible without causing movement of the saw chain. Such a requirement will be considered for inclusion in the next revision of this International Standard.ISO 11681-2:2011(E) ISO 2011 All rights reserved vBS EN ISO 11681-2:2011B

33、S EN ISO 11681-2:2011INTERNATIONAL STANDARD ISO 11681-2:2011(E)Machinery for forestry Portable chain-saw safety requirements and testing Part 2:Chain-saws for tree service1 ScopeThis part of ISO 11681 gives safety requirements and measures for their verification for the design and construction for t

34、ree service of portable, combustion-engine, hand-held chain-saws having a maximum mass without guide bar or saw chain and with tanks empty of 4,3 kg, intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator for pruning and dismantling stand

35、ing tree crowns, and by persons having read and understood the safety requirements provided in the instruction handbook, using the appropriate personal protective equipment (PPE). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information o

36、n safe working practices to be provided by the manufacturer are specified.This part of ISO 11681 deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by

37、the manufacturer.NOTE See Annex B for a list of significant hazards.This part of ISO 11681 is applicable to chain-saws manufactured after its date of publication.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, onl

38、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 6531:2008, Machinery for forestry Po rtable chain-saws V ocabularyISO 6533, Forestry machinery Po rtable chain-saw front hand-guard D imensions and clearancesISO

39、6534, Forestry machinery Po rtable chain-saw hand guards M echanical strengthISO 6535, Portable chain-saws C hain brake performanceISO 7293, Forestry machinery Po rtable chain-saws E ngine performance and fuel consumptionISO 7914:2002, Forestry machinery Po rtable chain-saws M inimum handle clearanc

40、e and sizesISO 7915, Forestry machinery Po rtable chain-saws D etermination of handle strengthISO 8334, Forestry machinery Po rtable chain-saws D etermination of balance and maximum holding momentISO 9518, Forestry machinery Po rtable chain-saws K ickback testISO 10726, Portable chain-saws C hain ca

41、tcher D imensions and mechanical strengthISO 12100:2010 , Safety of machinery G eneral principles for design Risk assessment and risk reductionISO 13772, Forestry machinery Po rtable chain-saws N on-manually actuated chain brake performance ISO 2011 All rights reserved 1BS EN ISO 11681-2:2011ISO 138

42、49-1:2006, Safety of machinery S afety-related parts of control systems P art 1: General principles for designISO 13849-2, Safety of machinery S afety-related parts of control systems P art 2: ValidationISO 13857:2008, Safety of machinery S afety distances to prevent hazard zones being reached by up

43、per and lower limbsISO 14982:1998, Agricultural and forestry machinery E lectromagnetic compatibility T est methods and acceptance criteriaISO 22867, Forestry and gardening machinery V ibration test code for portable hand-held machines with internal combustion engine V ibration at the handlesISO 228

44、68, Forestry and gardening machinery N oise test code for portable hand-held machines with internal combustion engine E ngineering method (Grade 2 accuracy)IEC 60745-1:2006, Hand-held motor-operated electric tools S afety P art 1: General requirements3 Terms and definitionsFor the purposes of this d

45、ocument, the terms and definitions given in ISO 6531 and ISO 12100 and the following apply.NOTE Figure 1 shows an example of a chain-saw within the scope of this part of ISO 11681.Key1 rear handle 7 guide bar2 throttle trigger lock-out 8 spiked bumper3 throttle trigger 9 chain catcher4 front handle

46、10 stopping device5 front hand guard 11 attachment point6 guide-bar cover 12 saw chainFigure 1 E xample of chain-sawISO 11681-2:2011(E)2 ISO 2011 All rights reservedBS EN ISO 11681-2:20113.1trained operatorperson who has competence and knowledge in the use of, and particular hazards associated with

47、using, a chain-saw (for tree service work) manufactured in accordance with the provisions of this part of ISO 11681, and the precautions to be taken to limit these hazards, including the wearing of the recommended personal protective equipment (PPE)4 Safety requirements and/or protective measures4.1

48、 GeneralMachines shall comply with the safety requirements and/or protective measures of this clause. In addition, the machine shall be designed according to the principles of ISO 12100 for relevant but not significant hazards which are not dealt with by this part of ISO 11681.The safe operation of

49、a chain-saw also depends on the safe environment associated with the use of personal protective equipment (PPE), such as gloves, slip-resistant footwear, and leg, eye, hearing and head protective equipment, as well as safe working procedures (see 5.1).Except where otherwise specified in this part of ISO 11681, the safety distances specified in ISO 13857:2008, 4.2.4.1 and 4.2.4.3, shall be met.4.2 Handles4.2.1 RequirementsChain-saws shall have a handle for e