EN ISO 10848-3-2017 en Acoustics - Laboratory and field measurement of flanking transmission for airborne impact and building service equipment sound between adjoining rooms - Part.pdf

《EN ISO 10848-3-2017 en Acoustics - Laboratory and field measurement of flanking transmission for airborne impact and building service equipment sound between adjoining rooms - Part.pdf》由会员分享，可在线阅读，更多相关《EN ISO 10848-3-2017 en Acoustics - Laboratory and field measurement of flanking transmission for airborne impact and building service equipment sound between adjoining rooms - Part.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining roomsPart 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017)BS EN ISO 10848-3:2017BSI Standards Publicatio

2、nWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10848-3 October 2017 ICS 91.120.20 Supersedes EN ISO 10848-3:2006English Version Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building s

3、ervice equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017) Acoustique - Mesurage en laboratoire et sur le terrain des transmissions latrales du bruit arien, des bruits de choc et du bruit dquipement techniq

4、ue de btiment entre des pices - Partie 3: Application aux lments de Type B lorsque la jonction a une influence importante (ISO 10848-3:2017) Akustik - Messung der Flankenbertragung von Luftschall, Trittschall und Schall von Gebudetechnischen Anlagen zwischen benachbarten Rumen im Prfstand und am Bau

5、 - Teil 3: Anwendung auf Typ B-Bauteile, wenn die Verbindung wesentlichen Einfluss hat (ISO 10848-3:2017) This European Standard was approved by CEN on 2 August 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Sta

6、ndard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (Engli

7、sh, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, B

8、ulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Swit

9、zerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nation

10、al Members. Ref. No. EN ISO 10848-3:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 10848-3:2017. It is identical to ISO 10848-3:2017. It supersedes BS EN ISO 10848-3:2006, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee

11、 EH/1/6, Building acoustics.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution

12、2017 Published by BSI Standards Limited 2017ISBN 978 0 580 94765 0ICS 91.120.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrig

13、enda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 10848-3:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10848-3 October 2017 ICS 91.120.20 Supersedes EN ISO 10848-3:2006English Version Acoustics - Laboratory and field measurement of flanking transmission for air

14、borne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017) Acoustique - Mesurage en laboratoire et sur le terrain des transmissions latrales du bruit arien, des bruits de choc et

15、 du bruit dquipement technique de btiment entre des pices - Partie 3: Application aux lments de Type B lorsque la jonction a une influence importante (ISO 10848-3:2017) Akustik - Messung der Flankenbertragung von Luftschall, Trittschall und Schall von Gebudetechnischen Anlagen zwischen benachbarten

16、Rumen im Prfstand und am Bau - Teil 3: Anwendung auf Typ B-Bauteile, wenn die Verbindung wesentlichen Einfluss hat (ISO 10848-3:2017) This European Standard was approved by CEN on 2 August 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions

17、for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in th

18、ree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards b

19、odies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, S

20、lovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reser

21、ved worldwide for CEN national Members. Ref. No. EN ISO 10848-3:2017 EBS EN ISO 10848-3:2017EN ISO 10848-3:2017 (E) 3 European foreword This document (EN ISO 10848-3:2017) has been prepared by Technical Committee ISO/TC 43 “Acoustics“ in collaboration with Technical Committee CEN/TC 126 “Acoustic pr

22、operties of building elements and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2018 and conflicting national standards shall be wi

23、thdrawn at the latest by April 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10848-3:2006. According to the C

24、EN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hung

25、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10848-3:2017 has been approved by CEN as EN ISO 10848-3:2017 w

26、ithout any modification. ISO 10848-3:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 24 Instrumentation 35 Test arrangement . 35.1 Requirements for the laboratory . 35.2 Requirements for a building structure in the field situation 45.3 Installation of the test junction

27、 . 45.4 Shielding technique 46 Test procedures . 47 Precision . 58 Expression of results 59 Test report . 6Annex A (informative) Measurement of Dn,f,ij,Iand Ln,f,ij,Iand Lne0,f,ij,Iwith sound intensity . 7Bibliography 8 ISO 2017 All rights reserved iiiContents PageBS EN ISO 10848-3:2017ISO 10848-3:2

28、017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 24 Instrumentation 35 Test arrangement . 35.1 Requirements for the laboratory . 35.2 Requirements for a building structure in the field situation 45.3 Installation of the test junction . 45.4 Shielding technique 46 Test pr

29、ocedures . 47 Precision . 58 Expression of results 59 Test report . 6Annex A (informative) Measurement of Dn,f,ij,Iand Ln,f,ij,Iand Lne0,f,ij,Iwith sound intensity . 7Bibliography 8 ISO 2017 All rights reserved iiiContents PageBS EN ISO 10848-3:2017ISO 10848-3:2017(E)ForewordISO (the International O

30、rganization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been estab

31、lished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardizat

32、ion.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with

33、 the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any

34、 patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorseme

35、nt.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL:

36、 www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics.This second edition cancels and replaces the first edition (ISO 10848-3:2006), which has been technically revised with the following changes:a) extension

37、to field measurements;b) extension to building service equipment with the introduction of the normalized flanking equipment sound pressure level;c) normalized direction-averaged vibration level difference for junctions between lightweight elements has been introduced.A list of all the parts in the I

38、SO 10848 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 10848-3:2017ISO 10848-3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Sta

39、ndards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also

40、take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In

41、particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elemen

42、ts of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received

43、(see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as w

44、ell as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics.Th

45、is second edition cancels and replaces the first edition (ISO 10848-3:2006), which has been technically revised with the following changes:a) extension to field measurements;b) extension to building service equipment with the introduction of the normalized flanking equipment sound pressure level;c)

46、normalized direction-averaged vibration level difference for junctions between lightweight elements has been introduced.A list of all the parts in the ISO 10848 series can be found on the ISO website.iv ISO 2017 All rights reserved INTERNATIONAL STANDARD ISO 10848-3:2017(E)Acoustics Laboratory and f

47、ield measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Part 3: Application to Type B elements when the junction has a substantial influence1 ScopeISO 10848 (all parts) specifies measurement methods to characterize the flanking tran

48、smission of one or several building components.This document specifies laboratory and field measurements of buildings for Type B elements (defined in ISO 10848-1) when the junction has a substantial influence.Laboratory measurements are used to quantify the performance of the junction with suppresse

49、d flanking transmission from the laboratory structure. Field measurements are used to characterize the in situ performance and it is not usually possible to suppress unwanted flanking transmission sufficiently; hence, the results can only be considered representative of the performance of that junction when installed in that particular building structure.This document is referred to in ISO 10848-1:2017, 4.5 as being a supporting part to the frame document and applies to Type B elements that are structurally connected as defined in I