EN IEC 60810-2018 en Lamps light sources and led packages for road vehicles - Performance requirements.pdf

《EN IEC 60810-2018 en Lamps light sources and led packages for road vehicles - Performance requirements.pdf》由会员分享，可在线阅读，更多相关《EN IEC 60810-2018 en Lamps light sources and led packages for road vehicles - Performance requirements.pdf（96页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Lamps, light sources and led packages for road vehicles Performance requirements (IEC 60810:2017)BS EN IEC 60810:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60810 February 2018 ICS 29.140.99 Supersedes

2、EN 60810:2015 English Version Lamps, light sources and led packages for road vehicles - Performance requirements (IEC 60810:2017) Lampes, sources lumineuses et led encapsules pour vhicules routiers - Exigences de performances (IEC 60810:2017) Lampen fr Straenfahrzeuge - Anforderungen an die Arbeitsw

3、eise (IEC 60810:2017) This European Standard was approved by CENELEC on 2017-10-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date list

4、s and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation un

5、der the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, E

6、stonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European

7、 Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwid

8、e for CENELEC Members. Ref. No. EN IEC 60810:2018 E National forewordThis British Standard is the UK implementation of EN IEC 60810:2018. It is identical to IEC 60810:2017. It supersedes BS EN 60810:2015, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee

9、 CPL/34/1, Electric lamps.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 20

10、18 Published by BSI Standards Limited 2018ISBN 978 0 580 96084 0ICS 29.140.99Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2018.Amendments/corrigen

11、da issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 60810:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60810 February 2018 ICS 29.140.99 Supersedes EN 60810:2015 English Version Lamps, light sources and led packages for road vehicles - Performance requirements (IEC

12、 60810:2017) Lampes, sources lumineuses et led encapsules pour vhicules routiers - Exigences de performances (IEC 60810:2017) Lampen fr Straenfahrzeuge - Anforderungen an die Arbeitsweise (IEC 60810:2017) This European Standard was approved by CENELEC on 2017-10-30. CENELEC members are bound to comp

13、ly with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

14、 Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre ha

15、s the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, La

16、tvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee f

17、r Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 60810:2018 E BS EN IEC 60810:2018EN IEC 60810:2018 2 European foreword The tex

18、t of document 34A/2021/FDIS, future edition 5 of IEC 60810, prepared by SC 34A “Lamps“ of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60810:2018. The following dates are fixed: latest date by which the document has to be im

19、plemented at national level by publication of an identical national standard or by endorsement (dop) 2018-08-09 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-02-09 This document supersedes EN 60810:2015. Attention is drawn to the possibilit

20、y that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60810:2017 was approved by CENELEC as a European Standard without any m

21、odification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-2-20 NOTE Harmonized as EN 60068-2-20 IEC 60068-2-47 NOTE Harmonized as EN 60068-2-47 IEC 60682:1980 NOTE Harmonized as EN 60682:1993 IEC 60809:1995 NOTE Harmonized as

22、EN 60809:1996 IEC 60809:1995/A5:2012 NOTE Harmonized as EN 60809:1996/A5:2012 BS EN IEC 60810:2018EN IEC 60810:2018 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a w

23、ay that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified b

24、y common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050-845 - International Electrotechnical Vocabulary (

25、IEV) - Chapter 845: Lighting - - IEC 60061-1 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps EN 60061-1 - IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 - IEC 60068-2-43 - Envir

26、onmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections EN 60068-2-43 - IEC 60068-2-58 - Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting

27、 devices (SMD) EN 60068-2-58 - IEC 60068-2-60 - Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test EN 60068-2-60 - IEC 60809 2014 Lamps for road vehicles - Dimensional, electrical and luminous requirements EN 60809 2015 ISO 7637-2 2011 Road vehicles_- Electrical dis

28、turbances from conduction and coupling_- Part_2: Electrical transient conduction along supply lines only - - ISO 10605 - Road vehicles_- Test methods for electrical disturbances from electrostatic discharge - - CISPR 25 - Vehicles, boats and internal combustion engines - Radio disturbance characteri

29、stics - Limits and methods of measurement for the protection of on-board receivers EN 55025 - United Nations Vehicle Regulations 1958 Agreement concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles

30、and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions JESD22-A101C - Steady-state temperature humidity bias life test - - JESD22-A104E - Temperature cycling - - BS EN IEC 60810:2018EN IEC 60810:2018 4 JESD22-A105C - Power and temperature cycling - - J

31、ESD22-A106B - Thermal shock - - JESD22-A108D - Temperature, bias, and operating life - - JESD22-A113F - Preconditioning of plastic surface mount devices prior to reliability testing - - JESD22-A115C - Electrostatic discharge (ESD) sensitivity testing machine model (MM) - - JESD22-B101B - External vi

32、sual - - JESD22-B103B - Vibration, variable frequency - - JESD22-B106D - Resistance to solder shock for through-hole mounted devices - - JESD22-B110B - Mechanical shock - Component and subassembly - - JESD22-B116 1998 Wire Bond Shear Test Method - - JESD51-50:2012-04 - Overview of methodologies for

33、the thermal measurement of single- and multi-chip, single- and multi-pn-junction light-emitting diodes (LEDs) - - JESD51-51:2012-04 - Implementation of the electrical test method for the measurement of real thermal resistance and impedance of light-emitting diodes with exposed cooling surface - - JE

34、SD51-52:2012-04 - Guidelines for combining CIE 127-2007 total flux measurements with thermal measurements of LEDs with exposed cooling surface - - JESD51-53:2012-05 - Terms, definitions and units glossary for LED thermal testing - - ANSI/IPC/ECA J-STD-002C - Solderability tests for component leads,

35、terminations, lugs, terminals and wires - - ANSI/ESDA/JEDEC JS-001 2012 Joint JEDEC/ESDA standard for electrostatic discharge sensitivity testing human body model (HBM) component level - - MIL-STD-883E 2015 Visual Inspection Criteria - - ZVEI 2016 Guideline for Customer Notifications of Product and/

36、or Process Changes (PCN) of Electronic Components specified for Automotive Applications - - BS EN IEC 60810:2018 2 IEC 60810:2017 IEC 2017 CONTENTS FOREWORD . 8 1 Scope 10 2 Normative references 10 3 Terms and definitions 12 4 Requirements and test conditions for filament lamps . 16 4.1 Basic functi

37、on and interchangeability 16 4.2 Torsion strength 16 4.3 Characteristic life Tc. 16 4.4 Life B316 4.5 Luminous flux maintenance . 17 4.6 Resistance to vibration and shock . 17 4.7 Glass-bulb strength . 17 5 Filament lamp data 17 6 Requirements and test conditions for discharge lamps 22 6.1 Basic fun

38、ction and interchangeability 22 6.2 Mechanical strength 22 6.2.1 Bulb-to-cap connection 22 6.2.2 Cable-to-cap connection (if any) 22 6.3 Characteristic life Tc. 22 6.4 Life B322 6.5 Luminous flux maintenance . 22 6.6 Resistance to vibration and shock . 22 6.7 Discharge lamps with integrated starting

39、 device 22 6.8 Discharge lamps with integrated starting device and integrated ballast . 23 7 Requirements and test conditions for LED light sources 23 7.1 Basic function and interchangeability 23 7.2 UV radiation 24 7.3 Luminous flux and colour maintenance . 24 7.4 Resistance to vibration and shock

40、. 26 7.5 Electromagnetic compatibility 27 7.6 Powered thermal cycling test 27 7.7 Mass . 28 7.8 Typical circuits for LED light sources 28 7.8.1 General . 28 7.8.2 Typical circuits for LR3, LR5, LY3, LY5, LW3 and LW5 LED light sources 28 7.8.3 Typical circuits for LR4 LED light sources 29 7.9 Maximum

41、 power consumption . 30 7.10 Overvoltage test 30 7.11 Reverse voltage test . 30 7.12 Transient voltage test (field decay) . 31 7.13 Transient voltage test (load dump) 32 7.14 Electrostatic discharge test (ESD) . 33 7.15 Pulsed operating life (PLT) test . 33 8 Requirements and test conditions for LED

42、 packages . 33 8.1 LED package stress test qualification 33 BS EN IEC 60810:2018IEC 60810:2017 IEC 2017 3 8.2 Test samples 34 8.2.1 Lot requirements 34 8.2.2 Production requirements 34 8.2.3 Pre- and post-stress test requirements 34 8.2.4 Assembly of LED packages on test boards 35 8.2.5 Moisture pre

43、-conditioning (MP) 35 8.2.6 Thermal resistance (TR) test . 35 8.3 Definition of failure criteria 35 8.4 Choice between test conditions . 36 8.5 Criteria for passing qualification/requalification . 36 8.6 Qualification test . 36 8.6.1 Pre- and post- electrical and photometric test 36 8.6.2 Pre- and p

44、ost- external visual (EV) test . 36 8.6.3 High temperature operating life (HTOL) test 36 8.6.4 Temperature cycling (TMCL) test . 37 8.6.5 Wet high temperature operating life (WHTOL) test . 37 8.6.6 Power temperature cycling (PTMCL) test . 37 8.6.7 Electrostatic discharge, human body model (ESD-HBM)

45、test . 38 8.6.8 Electrostatic discharge, machine model (ESD-MM) test . 38 8.6.9 Destructive physical analysis (DPA) test 38 8.6.10 Physical dimensions (PD) test . 38 8.6.11 Vibrations variable frequency (VVF) test 38 8.6.12 Mechanical shock (MS) test . 38 8.6.13 Resistance to soldering heat (RSH-TTW

46、) test 38 8.6.14 Resistance to soldering heat (RSH-reflow) test 39 8.6.15 Solderability (SO) test 39 8.6.16 Thermal shock (TMSK) test . 39 8.6.17 Hydrogen sulphide (H2S) test 39 8.6.18 Pulsed operating life (PLT) test 39 8.6.19 Dew (DEW) test . 40 8.6.20 Flowing mixed gas corrosion (FMGC) test . 41

47、8.6.21 Wire bond pull test (WBP) 41 8.6.22 Bond shear test (BS) . 42 8.6.23 Die shear test (DS) 42 Annex A (normative) Life test conditions for filament lamps . 43 A.1 Ageing 43 A.2 Test voltage 43 A.3 Operating position and operating conditions 43 A.4 Switching cycle . 43 A.4.1 Single-filament lamp

48、s 43 A.4.2 Dual-filament lamps for headlamps 44 A.4.3 Dual-filament lamps for light signalling equipment . 44 A.5 Luminous flux and colour maintenance . 44 Annex B (normative) Vibration tests . 45 B.1 General . 45 B.2 Test conditions . 46 B.2.1 General . 46 B.2.2 Mounting (see IEC 60068-2-47) . 46 B

49、.2.3 Measuring points . 46 BS EN IEC 60810:2018 4 IEC 60810:2017 IEC 2017 B.2.4 Control point 46 B.2.5 Conditioning 46 B.2.6 Axis of vibration . 46 B.2.7 WBR test Basic motion . 47 B.3 Test conditions . 47 B.3.1 General . 47 B.3.2 Narrowband random vibration tests 47 B.3.3 Wideband random vibration tests . 48 Annex C (normative) Glass-bulb strength test 50 C.1 General . 50 C.2 Test equipment and procedure 50 C.2.1 Principle of the test equipment . 50 C.2.2 Test conditions 50 C