EN 62631-3-2-2016 en Dielectric and resistive properties of solid insulating materials - Part 3-2 Determination of resistive properties (DC Methods) - Surface resistance and surfac.pdf

《EN 62631-3-2-2016 en Dielectric and resistive properties of solid insulating materials - Part 3-2 Determination of resistive properties (DC Methods) - Surface resistance and surfac.pdf》由会员分享，可在线阅读，更多相关《EN 62631-3-2-2016 en Dielectric and resistive properties of solid insulating materials - Part 3-2 Determination of resistive properties (DC Methods) - Surface resistance and surfac.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、Dielectric and resistive properties of solid insulating materialsPart 3-2: Determination of resistive properties (DC Methods) Surface resistance and surface resistivity (IEC 62631-3-2:2015)BS EN 62631-3-2:2016 Incorporating corrigendum September 2016BSI Standards PublicationWB11885_BSI_StandardCovs_

2、2013_AW.indd 1 15/05/2013 15:06National forewordThe UK participation in its preparation was entrusted to TechnicalCommittee GEL/112, Evaluation and qualification of electrical insulatingmaterials and systems.A list of organizations represented on this committee can be obtained onrequest to its secre

3、tary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 95647 8ICS 17.220.99; 29.035.01Compliance with a British Standa

4、rd cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62631-3-2:201630 September 2016 Supersession de

5、tails added to National forewordThis British Standard is the UK implementation of EN 62631-3-2:2016. It is identical to IEC 62631-3-2:2015. Together with BS EN 62631-1:2011 and BS EN 62631-3-1:2016, it supersedes BS 6233:1982 which is withdrawn.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62

6、631-3-2 February 2016 ICS 17.220.99; 29.035.01 English Version Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (IEC 62631-3-2:2015) Proprits dilectriques et rsistives des mat

7、riaux isolants solides - Partie 3-2: Dtermination des proprits rsistives (Mthodes en courant continu) - Rsistance superficielle et rsistivit superficielle (IEC 62631-3-2:2015) Dielektrische und resistive Eigenschaften fester Isolierstoffe - Teil 3-2: Bestimmung von Widerstandseigenschaften (Gleichst

8、romverfahren) - Oberflchenwiderstand und spezifischer Oberflchenwiderstand (IEC 62631-3-2:2015) This European Standard was approved by CENELEC on 2016-01-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

9、 the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (Englis

10、h, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of A

11、ustria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, S

12、pain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights

13、of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62631-3-2:2016 E BS EN 62631-3-2:2016EN 62631-3-2:2016 2 European foreword The text of document 112/340/FDIS, future edition 1 of IEC 62631-3-2, prepared by IEC/TC 112 “Evaluation and qualification of el

14、ectrical insulating materials and systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62631-3-2:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endo

15、rsement (dop) 2016-10-08 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-01-08 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsi

16、ble for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62631-3-2:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards i

17、ndicated: IEC 60893-2 NOTE Harmonized as EN 60893-2. IEC 61212-2 NOTE Harmonized as EN 61212-2. IEC 62011-2 NOTE Harmonized as EN 62011-2. ISO 10350 (Series) NOTE Harmonized as EN ISO 10350 (Series). ISO 10350-1 NOTE Harmonized as EN ISO 10350-1. ISO 10350-2 NOTE Harmonized as EN ISO 10350-2. ISO 14

18、526 (Series) NOTE Harmonized as EN ISO 14526 (Series). ISO 14527 (Series) NOTE Harmonized as EN ISO 14527 (Series). ISO 14528 (Series) NOTE Harmonized as EN ISO 14528 (Series). ISO 14529 (Series) NOTE Harmonized as EN ISO 14529 (Series). ISO 14530 (Series) NOTE Harmonized as EN ISO 14530 (Series). I

19、SO 15252 (Series) NOTE Harmonized as EN ISO 15252 (Series). BS EN 62631-3-2:2016EN 62631-3-2:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this

20、document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indi

21、cated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60212 - Standard conditions for use prior to and during the testing of solid electr

22、ical insulating materials EN 60212 - IEC 62631-3-1 - Dielectric and resistive properties of solid insulating materials - Part 3-1 Determination of resistive properties (DC Methods) - Volume resistance and volume resistivity, general method - - IEC 62631-3-3 - Dielectric and resistive properties of s

23、olid insulating materials - Part 3-1 Determination of resistive properties (DC Methods) - Volume resistance and volume resistivity, general method EN 62631-3-3 - BS EN 62631-3-2:2016 2 IEC 62631-3-2:2015 IEC:2015 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 Si

24、gnificance . 7 5 Method of test . 7 5.1 General . 7 5.2 Voltage . 8 5.3 Equipment 8 5.3.1 General . 8 5.3.2 Accuracy . 8 5.3.3 Voltage source 8 5.3.4 Electrode arrangement A Spring loaded electrodes . 8 5.3.5 Electrode arrangement B Small line electrodes . 9 5.3.6 Electrode arrangement C Annular ele

25、ctrodes 10 5.3.7 Electrode arrangement D Line electrodes . 11 5.3.8 Electrode arrangement E Line electrodes for small plates . 11 5.4 Test circuit 11 5.5 Calibration 12 5.6 Test specimen 12 5.6.1 Recommended dimensions of test specimen and electrode arrangements 12 5.6.2 Manufacturing of test specim

26、en . 12 5.6.3 Number of test specimen . 13 5.6.4 Application of electrodes 13 5.6.5 Conditioning and pre-treatment of test specimen . 13 5.7 Test procedure 13 6 Evaluation . 13 6.1 For electrode arrangements A, B, D, and E . 13 6.2 For electrode arrangement C 14 7 Test report . 14 8 Repeatability an

27、d reproducibility 15 Annex A (informative) Specimen dimensions and electrode arrangement . 16 Bibliography 17 Figure 1 Electrode arrangement A (example) . 9 Figure 2 Collector electrode for electrode arrangement B. 10 Figure 3 Electrode arrangement C . 10 Figure 4 Connection diagram of measurement w

28、ith two- and three-terminal electrode arrangements 12 Table 1 Typical electrode dimensions for electrode arrangement C 11 Table A.1 Recommended test specimen dimensions and electrode arrangements for specific products . 16 BS EN 62631-3-2:2016IEC 62631-3-2:2015 IEC:2015 3 INTERNATIONAL ELECTROTECHNI

29、CAL COMMISSION _ DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS Part 3-2: Determination of resistive properties (DC methods) Surface resistance and surface resistivity FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization c

30、omprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International S

31、tandards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this p

32、reparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two org

33、anizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the for

34、m of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpreta

35、tion by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or re

36、gional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried ou

37、t by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committee

38、s for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the

39、 Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held

40、responsible for identifying any or all such patent rights. International Standard IEC 62631-3-2 has been prepared by IEC technical committee 112: Evaluation and qualification of electrical insulating materials and systems. This first edition cancels and replaces the second edition of IEC 60093, publ

41、ished in 1980, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the second edition of IEC 60093: a) IEC 60093 has been completely revised, both editorially and technically, and incorporated into the new IEC 62631 series; b) test

42、methods have been updated to current day state of the art; c) volume and surface resistance and resistivity are now separated into IEC 62631-3-1 and IEC 62631-3-2, respectively. BS EN 62631-3-2:2016 4 IEC 62631-3-2:2015 IEC:2015 The text of this standard is based on the following documents: FDIS Rep

43、ort on voting 112/340FDIS 112/351/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62631 series,

44、published under the general title Dielectric and resistive properties of solid insulating materials, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.

45、ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 62631-3-2:2016IEC 62631-3-2:2015 IEC:2015 5 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS Part 3-2: Determination of

46、 resistive properties (DC methods) Surface resistance and surface resistivity 1 Scope This part of IEC 62631 covers methods of test for the determination of surface resistance and surface resistivity of electrical insulation materials by applying DC voltage. 2 Normative references The following docu

47、ments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60212, Standard condi

48、tions for use prior to and during the testing of solid electrical insulating materials IEC 62631-3-1, Dielectric and resistive properties of solid insulating materials Part 3-1: Determination of resistive properties (DC Methods) Volume resistance and volume resistivity General method1IEC 62631-3-3,

49、Dielectric and resistive properties of solid insulating materials Part 3-3: Determination of resistive properties (DC Methods) Insulation resistance13 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 electrode arrangement electrical conductive bodies on the surface of a test specimen Note 1 to entry: The arrangement of electrodes should include procedures to ascertain sufficient contact to the surface (e.g.