EN 62007-1-2009 718 Semiconductor optoelectronic devices for fibre optic system applications - Part 1 Specification template for essential ratings and characteristics《光纤系统用半导体光电器件 .pdf

《EN 62007-1-2009 718 Semiconductor optoelectronic devices for fibre optic system applications - Part 1 Specification template for essential ratings and characteristics《光纤系统用半导体光电器件 .pdf》由会员分享，可在线阅读，更多相关《EN 62007-1-2009 718 Semiconductor optoelectronic devices for fibre optic system applications - Part 1 Specification template for essential ratings and characteristics《光纤系统用半导体光电器件 .pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、Semiconductor optoelectronicdevices for fibre optic systemapplications Part 1: Specification template for essential ratingsand characteristicsBS EN 62007-1:2009raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsCopyright European Com

2、mittee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 62007-1:2009. It isidentical to IEC 62007-1:2008. It supersed

3、es BS EN 62007-1:2000 which iswithdrawn.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems andactive devices.A list of organizations represented on this committee can be obtained onrequest to its secretary.T

4、his publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 53019 7ICS 31.080.01; 31.260; 33.180.01BRITISH STANDARDBS EN 62007-1:2009Compliance with a British Standard cannot confer immunity fromlega

5、l obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 March 2009. Amendments issued since publicationAmd. No. Date Text affectedCopyright European Committee for Electrotechnical Standardization Provided by IHS under license with CEN

6、ELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 62007-1 NORME EUROPENNE EUROPISCHE NORM February 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Ele

7、ktrotechnische Normung Central Secretariat: avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62007-1:2009 E ICS 33.180.01; 31.260; 31.080.01 Supersedes EN 62007-1:2000English version Semicon

8、ductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics (IEC 62007-1:2008) Dispositifs optolectroniques semiconducteurs pour application dans les systmes fibres optiques - Partie 1: Modle de spcification relatif aux

9、 valeurs et caractristiques essentielles (CEI 62007-1:2008) Optoelektronische Halbleiterbauelemente fr Anwendungen in Lichtwellenleitersystemen - Teil 1: Vorlage fr Leistungsspezifikationen fr wesentliche Grenz- und Kennwerte (IEC 62007-1:2008) This European Standard was approved by CENELEC on 2008-

10、12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be ob

11、tained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Ce

12、ntral Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

13、 Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62007-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking

14、 permitted without license from IHS-,-,-EN 62007-1:2009 - 2 - Foreword The text of document 86C/849/FDIS, future edition 2 of IEC 62007-1, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELE

15、C as EN 62007-1 on 2008-12-01. This European Standard supersedes EN 62007-1:2000. EN 62007-1:2009 includes the following significant technical changes with respect to EN 62007-1:2000. the title has been changed to indicate that this is a template; the definitions of some symbols and terms in EN 6200

16、7-1:2000 are revised in order to harmonize them with those in other SC 86C documents. A dated part in EN 62007-1:2000 is removed and the other dated parts are updated. NOTE The field of this standard will henceforth be placed under the responsibility of IEC technical committee 86: Fibre optics. The

17、following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-12-01 Annex ZA has b

18、een added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62007-1:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 62007-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELEC

19、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 62007-1:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of t

20、his document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD appli

21、es. Publication Year Title EN/HD Year IEC 60747-5-1 -1)Discrete semiconductor devices and integrated circuits - Part 5-1: Optoelectronic devices - General EN 60747-5-1 20012)IEC 60825 Series Safety of laser products EN 60825 Series 1)Undated reference. 2)Valid edition at date of issue. BS EN 62007-1

22、:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 2 62007-1 IEC:2008 CONTENTS 1 Scope and object7 2 Normative references7 3 Terms, definitions and abbrev

23、iations .7 3.1 Terms and definitions 7 3.2 Abbreviations.9 4 LEDs for fibre optic systems or subsystems 9 4.1 Type9 4.2 Semiconductor materials .9 4.3 Details of outline and encapsulation.9 4.4 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated.1

24、0 4.5 Electrical and optical characteristics 11 4.6 Supplementary information 11 4.6.1 Typical curve or coefficient.11 5 Laser module with pigtails.12 5.1 Type12 5.2 Semiconductor 12 5.2.1 Materials12 5.2.2 Structure12 5.3 Details of outline and encapsulation.12 5.4 Limiting values (absolute maximum

25、 ratings) over the operating temperature range, unless otherwise stated.12 5.5 Electric and optical characteristics .14 5.6 Supplementary information 16 5.7 Hazards.16 6 PIN photodiodes for fibre optic systems or subsystems .16 6.1 Type16 6.2 Semiconductor materials .16 6.3 Details of outline and en

26、capsulation.16 6.4 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated.17 6.5 Electrical and optical characteristics 18 6.6 Supplementary information 18 7 Avalanche photodiodes (APDs) with or without pigtails 18 7.1 Type18 7.2 Semiconductor 19 7.2

27、.1 Materials19 7.2.2 Structure19 7.3 Details of outline and encapsulation.19 7.4 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated.19 7.5 Electrical and optical characteristics 19 7.6 Supplementary information 20 8 PIN-TIA modules for fibre opti

28、c systems or subsystems 21 8.1 Type21 8.2 Semiconductor materials .21 BS EN 62007-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-62007-1 IEC:2008 3 8.

29、3 Structure .21 8.4 Details of outline and encapsulation.21 8.5 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated.22 8.6 Operating conditions at Tamb= 25 C, unless otherwise stated .22 8.7 Electrical and optical characteristics 23 8.8 Supplement

30、ary information 23 9 Laser diode modules for pumping an optical fibre amplifier23 9.1 Type23 9.2 Semiconductor materials .24 9.3 Structure .24 9.4 Details of outline and encapsulation.24 9.5 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated25 9.

31、6 Electrical and optical characteristics 26 9.7 Supplementary information 27 9.8 Hazards.27 10 Laser diode modules for fibre optic analogue transmission systems or subsystems 27 10.1 Type27 10.2 Semiconductor materials .27 10.3 Structure .28 10.4 Details of outline and encapsulation.28 10.5 Limiting

32、 values (absolute maximum ratings) over the operating temperature range, unless otherwise stated.28 10.6 Electrical and optical characteristics 29 10.7 Supplementary information 30 10.8 Hazards.31 11 LED arrays for fibre optic systems or subsystems31 11.1 Type31 11.2 Semiconductor materials .31 11.3

33、 Details of outline and encapsulation.31 11.4 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated.32 11.5 Electrical and optical characteristics 33 11.6 Supplementary information 34 12 Optical modulators for digital fibre optic applications .34 12

34、.1 Type34 12.2 Materials .34 12.3 Structure .35 12.4 Details of outline and encapsulation.35 12.5 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated35 12.6 Electrical and optical characteristics 36 12.7 Supplementary information 37 12.8 Hazards.3

35、7 Bibliography38 Table 1 Limiting values for LEDs 10 Table 2 Electrical and optical characteristics for LEDs 11 BS EN 62007-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without

36、license from IHS-,-,- 4 62007-1 IEC:2008 Table 3 Electric and optical characteristics for laser modules with pigtails.14 Table 4 Limiting values for PIN photodiodes .17 Table 5 Electrical and optical characteristics for PIN photodiodes .18 Table 6 Electrical and optical characteristics for avalanche

37、 photodiodes (APDs) with or without pigtails 20 Table 7 Limiting values for PIN-TIA modules 22 Table 8 Operating conditions for PIN-TIA modules22 Table 9 Electrical and optical characteristics for PIN-TIA modules 23 Table 10 Limiting values for laser diode modules for pumping an optical fibre amplif

38、ier.25 Table 11 Electrical and optical characteristics for laser diode modules for pumping an optical fibre amplifier.26 Table 12 Limiting values for laser diode modules for fibre optic analogue transmission systems or subsystems .28 Table 13 Electrical and optical characteristics for laser diode mo

39、dules for fibre optic analogue transmission systems or subsystems29 Table 14 Limiting values for LED arrays32 Table 15 Electrical and optical characteristics for LED arrays .33 Table 16 Limiting values for optical modulators for digital fibre optic applications 35 Table 17 Electrical and optical cha

40、racteristics for optical modulators for digital fibre optic applications 36 BS EN 62007-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-62007-1 IEC:200

41、8 7 SEMICONDUCTOR OPTOELECTRONIC DEVICES FOR FIBRE OPTIC SYSTEM APPLICATIONS Part 1: Specification template for essential ratings and characteristics 1 Scope and object This part of IEC 62007 is a specification template for essential ratings and characteristics of the following categories of semicon

42、ductor optoelectronic devices to be used in the field of fibre optic systems and subsystems: semiconductor photoemitters; semiconductor photoelectric detectors; monolithic or hybrid integrated optoelectronic devices and their modules. The object of this performance specification template is to provi

43、de a frame for the preparation of detail specifications for the essential ratings and characteristics. Detail specification writers may add specification parameters and/or groups of specification parameters for particular applications. However, detail specification writers may not remove specificati

44、on parameters specified in this standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amend

45、ments) applies. IEC 60825 (all parts), Safety of laser products IEC 60747-5-1, Discrete semiconductor devices and integrated circuits Part 5-1: Optoelectronic devices General 3 Terms, definitions and abbreviations For the purposes of this document, the following terms, definitions and abbreviations

46、apply, as well as terms and definitions concerning physical concepts, types of devices, general terms, and ratings and characteristics given in IEC 60747-5-1. 3.1 Terms and definitions 3.1.1 PIN photodiode photodiode with a large intrinsic region sandwiched between p- and n-doped semiconducting regi

47、ons used for the detection of optical radiation NOTE Adapted from IEV 731-06-29, specialized BS EN 62007-1:2009Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-

48、,- 8 62007-1 IEC:2008 3.1.2 avalanche photodiode APD photodiode operating with a bias voltage such that the primary photocurrent undergoes amplification by cumulative multiplication of charge carriers. NOTE Adapted from IEV 731-06-30, specialized. 3.1.3 relative intensity noise RIN quotient of the radiant power mean square fluctuations to the mean square radiant power 2, normalized to a frequency band of unit width NOTE RIN is usually expressed in dB/Hz. ( ) fRIN =2e2e10log 103.1.4 s