EN 61968-13-2008 en Application integration at electric utilities - System interfaces for distribution management - Part 13 CIM RDF Model exchange format for distribution《电气设备的应用集成.pdf

《EN 61968-13-2008 en Application integration at electric utilities - System interfaces for distribution management - Part 13 CIM RDF Model exchange format for distribution《电气设备的应用集成.pdf》由会员分享，可在线阅读，更多相关《EN 61968-13-2008 en Application integration at electric utilities - System interfaces for distribution management - Part 13 CIM RDF Model exchange format for distribution《电气设备的应用集成.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、Application integration atelectric utilities Systeminterfaces for distributionmanagement Part 13: CIM RDF Model exchange formatfor distributionBS EN 61968-13:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsNational forewordThi

2、s British Standard is the UK implementation of EN 61968-13:2008. It isidentical to IEC 61968-13:2008.The UK participation in its preparation was entrusted to Technical CommitteePEL/57, Power systems management and associated information exchange.A list of organizations represented on this committee

3、can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 57403 0ICS 33.200BRITISH STANDARDBS EN 61968-13:2008Compliance with a British Standard cannot c

4、onfer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on Amendments issued since publicationAmd. No. Date Text affectedMarch 200931EUROPEAN STANDARD EN 61968-13 NORME EUROPENNE EUROPISCHE NORM October 2008 CENELEC E

5、uropean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide

6、 for CENELEC members. Ref. No. EN 61968-13:2008 E ICS 33.200 English version Application integration at electric utilities - System interfaces for distribution management - Part 13: CIM RDF Model exchange format for distribution (IEC 61968-13:2008) Intgration dapplications pour les services lectriqu

7、es - Systme dinterfaces pour la gestion de la distribution - Partie 13: Format dchange du modle CIM RDF pour la distribution (CEI 61968-13:2008) Integration von Anwendungen in Anlagen der Elektrizittsversorgung - Systemschnittstellen fr Netzfhrung - Teil 13: RDF-Austauschformat des CIM-Models fr Ver

8、teilnetze (IEC 61968-13:2008) This European Standard was approved by CENELEC on 2008-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-d

9、ate lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation unde

10、r the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Fran

11、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 61968-13:2008 - 2 - Foreword The text of document 57/930/FDIS, future edition 1 o

12、f IEC 61968-13, prepared by IEC TC 57, Power systems management and associated information exchange, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61968-13 on 2008-09-01. The following dates were fixed: latest date by which the EN has to be implemented at national

13、level by publication of an identical national standard or by endorsement (dop) 2009-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-09-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 6196

14、8-13:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 61968-13:2008- 3 - EN 61968-13:2008 Annex ZA(normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable fo

15、r the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), th

16、e relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61968-1 -7)Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture and general requirements EN 61968-1 20048)IEC 61968-3 -7)Application integration at electric utili

17、ties - System interfaces for distribution management - Part 3: Interface for network operations EN 61968-3 20048)IEC 61968-4 -7)Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records and asset management EN 61968-4 20078)IEC 619

18、70-301 -7)Energy management system application program interface (EMS-API) - Part 301: Common Information Model (CIM) base EN 61970-301 20048)IEC 61970-501 -7)Energy management system application program interface (EMS-API) - Part 501: Common Information Model Resource Description Framework (CIM RDF

19、) schema EN 61970-501 20068)7)Undated reference. 8)Valid edition at date of issue. BS EN 61968-13:2008 2 61968-13 IEC:2008(E) CONTENTS INTRODUCTION.6 1 Scope.7 2 Normative references .8 3 Future standards documents related to this part .9 4 CIM RDF describing distribution networks 9 5 Issues related

20、 to partial-phase devices modeling10 5.1 General .10 5.2 Impedances of unbalanced and partial phase devices .10 5.3 Switches .10 5.4 Partial phase continuity in radial networks.10 6 CIM classes used and corresponding RDF .11 6.1 General .11 6.2 BaseVoltage and VoltageLevel11 6.3 Containment hierarch

21、y roots12 6.4 HV/MV substation12 6.5 MV/MV substation .12 6.6 MV/LV substation 13 6.7 Junction 13 6.8 Switch)14 6.9 Bay .14 6.10 BusbarSection.15 6.11 PowerTransformer.16 6.12 MV/MV transformer .17 6.13 Line.17 6.14 ACLineSegment 19 6.15 WireArrangement 19 6.16 Compensator.21 6.17 StaticVarCompensat

22、or.21 6.18 EquivalentLoad .22 6.19 Using CustomerLoad, GeneratingUnit and SynchronousMachine to model Distributed Energy Resource.23 6.20 GeneratingUnit 24 6.21 SynchronousMachine 24 6.22 HostControlArea25 6.23 SubControlArea.25 7 Adequation between IEC 61968-3 (CDPSM) and IEC 61968-425 8 Adequation

23、 between CDPSM and CPSM 26 Annex A (informative) CIM XML Document from Langdale .27 Annex B (informative) Comparison between CIM RDF and CIM XSD (ISO ITC Working Group Architecture).30 Annex C (informative) Key discussion points on CIM RDF and CIM XSD (ISO ITC Working Group Architecture).32 Annex D

24、(informative) Conclusions and recommendations (ISO ITC Working Group Architecture) .33 BS EN 61968-13:200861968-13 IEC:2008(E) 3 Annex E (informative) Example of a European distribution network described through CIM RDF.34 Annex F (informative) Example of a North American distribution network .42 An

25、nex G (informative) Comparison between CDPSM and CPSM44 Bibliography58 Figure 1 XML-based DMS network data configuration 8 Figure 2 Connectivity of BusbarSection15 Figure E.1 European distribution network example.35 Figure F.1 North American distribution network example43 Table 1 Header of NetworkDa

26、taSet message type .25 Table 2 Message Payload of NetworkDataSet message type .26 BS EN 61968-13:2008 6 61968-13 IEC:2008(E) INTRODUCTION The IEC 61968 series of standards is intended to facilitate inter-application integration as opposed to intra-application integration. Intra-application integrati

27、on is aimed at programs in the same application system, usually communicating with each other using middleware that is embedded in their underlying runtime environment, and tends to be optimized for close, real-time, synchronous connections and interactive request/reply or conversation communication

28、 models. IEC 61968, by contrast, is intended to support the inter-application integration of a utility enterprise that needs to connect disparate applications that are already built or new (legacy or purchased applications), each supported by dissimilar runtime environments. Therefore, these interfa

29、ce standards are relevant to loosely coupled applications with more heterogeneity in languages, operating systems, protocols and management tools. This series of standards is intended to support applications that need to exchange data every few seconds, minutes, or hours rather than waiting for a ni

30、ghtly batch run. This series of standards, which are intended to be implemented with middleware services that exchange messages among applications, will complement, not replace utility data warehouses, database gateways, and operational stores. As used in IEC 61968, a DMS consists of various distrib

31、uted application components for the utility to manage electrical distribution networks. These capabilities include monitoring and control of equipment for power delivery, management processes to ensure system reliability, voltage management, demand-side management, outage management, work management

32、, automated mapping and facilities management. Standards interfaces are defined for each class of applications identified in the Interface Reference Model (IRM), which is described in IEC 61968-1. BS EN 61968-13:200861968-13 IEC:2008(E) 7 APPLICATION INTEGRATION AT ELECTRIC UTILITIES SYSTEM INTERFAC

33、ES FOR DISTRIBUTION MANAGEMENT Part 13: CIM RDF Model exchange format for distribution 1 Scope This part of IEC 61968 specifies the format and rules for exchanging modeling information based upon the CIM (Common Information Model) and related to distribution network data. The intention of this part

34、of IEC 61968 is to allow the exchange of instance data in bulk. Thus, the imported network model data should be sufficient to allow performing network connectivity analysis, including network tracing, outage analysis, load flow calculations, etc. This part could be used for synchronizing geographica

35、l information system databases with remote control system databases. This part is closely linked to IEC 61970-452 Energy Management System Application Program Interface (EMS-API) CIM Network applications model exchange specification. Thus, this document has been written in order to reduce its mainte

36、nance. It describes only differences with IEC 61970-452. Nevertheless, as IEC 61970-452 is a future international standard, this part still has duplicate information with IEC 61970-452, in order to be more understandable. It uses the CIM RDF1)Schema presented in IEC 61970-501 as the meta-model frame

37、work for constructing XML2)documents containing power system modeling information. The syntax of these documents is called CIM XML format. Model exchange by file transfer serves many useful purposes, specially when some applications need to have the complete network model defined. Though the format

38、can be used for general CIM-based information exchange, in this part of IEC 61968, specific profiles (or subsets) of the CIM are identified in order to address particular exchange requirements. Given the CIM RDF Schema described in IEC 61970-501, a DMS power system model can be converted for export

39、as an XML document, see Figure 1. This document is referred to as a CIM XML document. All of the tags (resource descriptions) used in the CIM XML document are supplied by the CIM RDF schema. The resulting CIM XML model exchange document can be parsed and the information imported into a foreign syste

40、m. This part of IEC 61968 is aligned to CIM Model version 11, CPSM 3.0 profile. 1)RDF: Resource Description Framework. 2)XML: eXtensible Markup Language. BS EN 61968-13:2008 8 61968-13 IEC:2008(E) WC3 RDF Syntax IEC 61968-13Profile based onIEC 61970-452 (CIM Network applications model exchange speci

41、fication)IEC 61970-501 CIM RDF schemaIEC 61970-552-4CIM XML model exchange formatTransmission(IEC 61970-301)Distribution(IEC 61968-11)CIM in UMLSystem AProprietary network modelImport/export processIEC 61968 network model CIM/XML documentSystem BProprietary network modelImport/export processIEC 6196

42、8 network model CIM/XML documentIEC 61968 Parts 3 -10 CIM/XSD MessagesFigure 1 XML-based DMS network data configuration Similar to using any programming language, implementers have many choices when creating a CIM XML document. The RDF syntax itself can be used in several ways to achieve the same ba

43、sic result. The way one approaches the CIM RDF Schema can yield various forms when producing a CIM XML document. The following clauses discuss the style guidelines for producing a CIM XML document. Such guideline rules are important to communicate and follow when producing these documents because th

44、ey simplify and facilitate the software written to unambiguously interpret the model information. Some comparisons have been made between CIM RDF and CIM XSD. Annexes A, B, C and D are extracted from articles and documents discussing CIM RDF and CIM XSD. A distribution management system can use only

45、 a CIM XSD message types architecture, but CIM RDF has three advantages: A UML model is a graph model and RDF helps to describe the graph model. XSD describes a hierarchical model which suits the message type approach. RDF is more readable and understandable by people working in the electrotechnical

46、 field. It is a basic requirement to build ontologies. If required, tools would ensure the compatibility between CIM-RDF and, for instance, IEC 61968-4 and IEC 61968-3 message types concerning distribution network model representation. 2 Normative references The following referenced documents are in

47、dispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61968-1, Application integration at electric utilities System interfaces for distribut

48、ion management Part 1: Interface architecture and general requirements IEC 61968-3, Application integration at electric utilities System interfaces for distribution management Part 3: Interface for network operations IEC 61968-4, Application integration at electric utilities System interfaces for di

49、stribution management Part 4: Interfaces for records and asset management IEC 940/08 BS EN 61968-13:200861968-13 IEC:2008(E) 9 IEC 61970-301, Energy management system application program interface (EMS-API) Part 301: Common Information Model (CIM) base IEC 61970-501, Energy management system application program interface (EMS-API) Part 501: Common Information Model Resource Description Framework (CIM RDF) schema 3 Future standards documents related