EN 61549-2003 en Miscellaneous Lamps (Incorporates Amendment A3 2012)《杂项灯座 包含修改件A2 2010》.pdf

《EN 61549-2003 en Miscellaneous Lamps (Incorporates Amendment A3 2012)《杂项灯座 包含修改件A2 2010》.pdf》由会员分享，可在线阅读，更多相关《EN 61549-2003 en Miscellaneous Lamps (Incorporates Amendment A3 2012)《杂项灯座 包含修改件A2 2010》.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 61549:2003Miscellaneous lampsICS 29.140.20; 29.140.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A2:2010BS EN +A3:2012Nat

2、ional forewordThis British Standard is the UK implementation of EN 61549:2003+A2:2010. It is identical to IEC 61549:2003, includingamendments 1:2005 and 2:2010. It supersedes BS EN 61549:2003which is withdrawn. The amendment by which each page of the European standard wasintroduced is indicated by a

3、n extension to the shoulder heading at thetop of the page (e.g. EN 61549:2003/A2:2010). Where no such extensionappears, the page is part of the original European standard. The UK participation in its preparation was entrusted by TechnicalCommittee CP/34, Lamps and related equipment, to Subcommittee

4、CPL/34/1, Electric lamps.A list of organizations represented on this subcommittee can beobtained on request to its secretary. This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. Compliance with a British Standard c

5、annot confer immunityfrom legal obligations.BS EN 61549:2003+A2:2010This British Standard waspublished under the authorityof the Standards Policy andStrategy Committee on 24 July 2003 BSI 2010Amendments/corrigenda issued since publicationAmd. No. Date Comments 15781 31 August Implementation of IEC a

6、mendment 1:2005with CENELEC endorsement A1:200531 July 2010 Implementation of IEC amendment 2:2010with CENELEC endorsement A2:2010ISBN 978 0 580 72085 7BS EN 61549:2003+A3:2012ISBN 978 0 580 75785 3Amendments/corrigenda issued since publicationAmd. No. Date Comments15781 31 August Implementation of

7、IEC amendment 1:2005with CENELEC endorsement A1:200531 July 2010 Implementation of IEC amendment 2:2010with CENELEC endorsement A2:201031 January 2013 Implementation of IEC amendment 3:2012with CENELEC endorsement A3:2012This British Standard waspublished under the authorityof the Standards Policy a

8、ndStrategy Committee on 24 July 2003 The British Standards Institution 2012.Published by BSI StandardsLimited 2012National forewordThis British Standard is the UK implementation of EN 61549:2003+A3:2012.It is identical to IEC 61549:2003, incorporating amendment 3:2012. Itsupersedes BS EN 61549:2003+

9、A2:2010 which is withdrawn.participation in its preparation was entrusted by TechnicalL/34, Lamps Related Equipment, to , lectric lamps.EUROPEAN STANDARD EN 61549NORME EUROPENNE EUROPISCHE NORM CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotech

10、nique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61549:2003 E ICS 29.140.20; 29.140.30 Supersedes EN 61549:1996

11、+ A1:1997 + A2:2001English version Miscellaneous lamps (IEC 61549:2003) Lampes diverses (CEI 61549:2003) Sonderlampen (IEC 61549:2003) This European Standard was approved by CENELEC on 2003-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condi

12、tions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in th

13、ree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechni

14、cal committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. +A2May 2010:2003EN 61549:2003+A3October 2012Foreword The text of

15、 document 34A/1027/FDIS, future edition 2 of IEC 61549, prepared by SC 34A, Lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61549 on 2003-06-01. This European Standard supersedes EN 61549:1996 + A1:1997 + A2:2001. The

16、 following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-06-01 _ Endorsement

17、 notice The text of the International Standard IEC 61549:2003 was approved by CENELEC as a European Standard without any modification. _ Page 2Foreword to amendment A1 The text of document 34A/1124/FDIS, future amendment 1 to IEC 61549:2003, prepared by SC 34A, Lamps, of IEC TC 34, Lamps and related

18、 equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 61549:2003 on 2005-04-01. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by end

19、orsement (dop) 2006-01-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2008-04-01 _ Endorsement notice The text of amendment 1:2005 to the International Standard IEC 61549:2003 was approved by CENELEC as an amendment to the European Standard w

20、ithout any modification. _ BS EN 61549:2003+A2:2010EN 61549:2003+A2:2010EN 61549:2003/A3:2012 - 2 - Foreword The text of document 34A/1568/FDIS, future edition 1 of IEC 61549:2003/A3, prepared by SC 34A, “Lamps“, of IEC TC 34, “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel v

21、ote and approved by CENELEC as EN 61549:2003/A3:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-05-09 latest date by which the national standards conflicting w

22、ith the document have to be withdrawn (dow) 2015-08-09 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Princi

23、ple Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 61549:2003/A3:2012 was approved by CENELEC as a European Standard without any modification. Page 2BS EN 6154

24、9:2003+A3:2012EN 61549:2003+A3:2012Foreword to amendment A2The text of document 34A/1372/FDIS, future amendment 2 to IEC 61549:2003, prepared by SC 34A, Lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN

25、61549:2003 on 2010-05-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the amendm

26、ent has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-02-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2013-05-01 _ Endorsement notice The text of amendment 2:2010 to the In

27、ternational Standard IEC 61549:2003 was approved by CENELEC as an amendment to the European Standard without any modification. _ Page 3BS EN 61549:2003+A2:2010EN 61549:2003+A2:2010EN 61549:2003/A3:2012 - 2 - Foreword The text of document 34A/1568/FDIS, future edition 1 of IEC 61549:2003/A3, prepared

28、 by SC 34A, “Lamps“, of IEC TC 34, “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61549:2003/A3:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical na

29、tional standard or by endorsement (dop) 2013-05-09 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-08-09 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN

30、shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC

31、61549:2003/A3:2012 was approved by CENELEC as a European Standard without any modification. Foreword to amendment A3Page 3BS EN 61549:2003+A3:2012EN 61549:2003+A3:2012Annex ZA (normative) Normative references to international publications with their corresponding European publications The following

32、referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by com

33、mon modifications, indicated by (mod), the relevant EN/HD applies. Add: Publication Year Title EN/HD Year IEC 60081 + A1 (mod) + A2 + A3 1997 2000 2003 2005 Double-capped fluorescent lamps - Performance specifications EN 60081 + A1 + A2 + A3 1998 2002 2003 2005 IEC 60598-1 (mod) - Luminaires - Part

34、1: General requirements and tests EN 60598-1 - IEC 60695-2-10 - Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure EN 60695-2-10 - IEC 60921 - Ballasts for tubular fluorescent lamps - Performance requirements EN 60921 - IEC 60929 - AC

35、-supplied electronic ballasts for tubular fluorescent lamps - Performance requirementsEN 60929 - IEC 61195 - Double-capped fluorescent lamps - Safety specifications EN 61195 - IEC 61347-2-3 - Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent l

36、amps EN 61347-2-3 - IEC 61347-2-8 - Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps EN 61347-2-8 - ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products - - Page 4BS EN 61549:2003+A2:2010EN 6

37、1549:2003 A2:2010+Page 4BS EN 61549:2003+A3:2012EN 61549:2003+A3:2012EN 61549:2003 A2:2010Page BS EN 61549:2003+A2:20105MISCELLANEOUS LAMPS 1 Scope This International Standard specifies lamps, or information relevant to lamps, not given elsewhere in existing IEC lamp standards. It covers both safety

38、 and performance aspects. NOTE For reasons of flexibility, the information in this loose-leaf publication is given in data sheet format. 2 General requirement The lamps specified in this standard shall comply with the relevant safety standard, if available. 3 Data sheets 3.1 General principle of num

39、bering of data sheets The first number represents the number of this standard: 61549, followed by the letters “IEC”. The second number represents the data sheet number. The third number represents the edition of the page of the data sheet. In cases where a data sheet has more than one page, it is po

40、ssible for the pages to have different edition numbers with the data sheet number remaining the same. 3.2 List of data sheets Sheet number Subject 61549-IEC-110 Double-capped metal halide lamps (Fc2 caps) - Dimensions 61549-IEC-120 Double-capped incandescent lamps (S14s caps) - Dimensions 61549-IEC-

41、130 Double-capped fluorescent lamps (Fa8 caps) - Dimensions 61549-IEC-140 U-shaped double-capped fluorescent lamps (2G13-92 caps) - Dimensions 61549-IEC-150 Double-capped incandescent lamps (S15s) - Dimensions 61549-IEC-310 Germicidal lamps - Symbol 61549-IEC-320 Radiation hazard - Symbol 61549-IEC-

42、330 Lamp operating positions - Symbols 61549-IEC-340 Protect against direct water contact - Symbol 61549-IEC-510 Tungsten filament ELV lamps - Marking 61549-IEC-520 Lamps for lighting chains - Filament position 61549-IEC-710 Xenon flash lamps with ignition transformer 61549-IEC-720 Metal halide lamp

43、s for film and television recording 61549-IEC-810 Requirements for double-capped fluorescent fragment retention lamps +Page 5BS EN 61549:2003+A3:2012EN 61549:2003+A2:2010blankDimensions in millimetres Caps Fc2 (1) DOUBLE-CAPPED METAL HALIDE LAMPS Dimensions Nominal wattage W AminAmaxDmax400 182 183

44、32,5 1 000 233 234 36,0 61549-IEC-110-1(1) See cap sheet 7004-114 of IEC 60061-1 and for holder dimensions and calculation of mounting distances, seesheet 7005-114 of IEC 60061-2. (2) The position of the exhaust tip is not specified. (3) Reference planes of the caps. (3)(2)(3)A4 maxDThis drawing giv

45、es information for specifying the mounting distance between the two Fc2 lampholders for those double-capped metal halide lamps that are not standardized in IEC 61167.EN 61549:2003BS EN 61549:2003+A2:2010BS EN 61549:2003+A3:2012EN 61549:2003blankDimensions in millimetres Caps S14s (1) DOUBLE-CAPPED I

46、NCANDESCENT LAMPS Dimensions Nominal mounting distance A Minimum (2) Maximum 241 240 242 441 440 442 941 940 942 61549-IEC-120-1Without using undue force, the two caps on the finished lamp shall pass simultaneously througha slot, 14,5 mm - 0,02 mm (3) in width and with a minimum length of (A + 26,1)

47、 mm (4). (1) See cap sheet 7004-112 of IEC 60061-1 and, for holder dimensions, see sheet 7005-112 of IEC 60061-2. (2) In France the minimum mounting distances are 239 mm, 439 mm and 939 mm respectively. (3) The tolerance applies only to the two end areas of the slot, having a length of 26,1 mm, the

48、centres of which aresituated at nominal mounting distance A. (4) The value of 26,1 mm is equal to cap dimension A1max. AThis drawing gives information for specifying the mounting distance between the two S14slampholders for double-capped incandescent lamps. EN 61549:2003BS EN 61549:2003+A2:2010BS EN

49、 61549:2003+A3:2012EN 61549:2003blankDimensions in millimetres Caps Fa8 (1) ADDOUBLE-CAPPED FLUORESCENT LAMPS Dimensions Nominal lamp dimensions AmaxDmax26 2 400 2 369,8 27,8 26 1 800 1 760,2 27,8 19 1 600 1 557,0 20,6 19 1 050 998,2 20,6 (1) See cap sheet 7004-57 of IEC 60061-1 and, for holder dimensions and calculation of mounting distances, seesheet 7005-58 of IEC 60061-2. 61549-IEC-130-1This drawing gives information for specifying the mounting distance between the two Fa8lampholders for tho