EN 61162-450-2011 en Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450 Multiple talkers and multiple listeners - Ethernet interconnec.pdf

《EN 61162-450-2011 en Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450 Multiple talkers and multiple listeners - Ethernet interconnec.pdf》由会员分享，可在线阅读，更多相关《EN 61162-450-2011 en Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450 Multiple talkers and multiple listeners - Ethernet interconnec.pdf（68页珍藏版）》请在麦多课文档分享上搜索。

1、Maritime navigation and radiocommunication equipment and systems Digital interfacesBS EN 61162-450:2011+A1:2016g51g68g85g87g3g23g24g19g29g3g48g88g79g87g76g83g79g72g3g87g68g79g78g72g85g86g3g68g81g71g3g80g88g79g87g76g83g79g72g3g79g76g86g87g72g81g72g85g86g3g179g3g40g87g75g72g85g81g72g87g3g76g81g87g72g8

2、5g70g82g81g81g72g70g87g76g82g81(IEC 61162-450:2011)BSI Standards PublicationBS EN 61162-450:2011+A1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 61162-450:2011+A1:2016. It is identical to IEC 61162-450:2011, incorporating amendment 1:2016. It supersedes

3、BS EN 61162-450:2011 which will be withdrawn on 5 May 2019.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by g1g2.Th

4、e UK participation in its preparation was entrusted to Technical Committee EPL/80, Maritime navigation and radiocommunication equipment and systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the n

5、ecessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 90208 6ICS 47.020.70Compliance with a British Standard cannot confer immunity from legal obligations.This British Standa

6、rd was published under the authority of the Standards Policy and Strategy Committee on 31 August 2011.Amendments/corrigenda issued since publicationDate Text affected30 June 2016 Implementation of IEC amendment 1:2016 with CENELEC endorsement A1:2016. Annex ZA modifiedEUROPEAN STANDARD EN 61162-450

7、NORME EUROPENNE EUROPISCHE NORM August 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitatio

8、n in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61162-450:2011 E ICS 47.020.70 English version Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and multiple listeners - Ethernet interconnection (IEC

9、61162-450:2011) Matriels et systmes de navigation et de radiocommunication maritimes - Interfaces numriques - Partie 450: Emetteurs multiples et rcepteurs multiples - Interconnexion Ethernet (CEI 61162-450:2011) Navigations- und Funkkommunikationsgerte und -systeme fr die Seeschifffahrt - Digitale S

10、chnittstellen - Teil 450: Mehrere Datensenden und mehrere Datenempfnger - Leichte Schiffssystemzusammenschaltung(IEC 61162-450:2011) This European Standard was approved by CENELEC on 2011-07-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditi

11、ons for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in thre

12、e official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnica

13、l committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerl

14、and and the United Kingdom. EN 61162-450:2011+A1May 2016EN 61162-450:2011 - 2 - Foreword The text of document 80/615/FDIS, future edition 1 of IEC 61162-450, prepared by IEC TC 80, Maritime navigation and radiocommunication equipment and systems, was submitted to the IEC-CENELEC parallel vote and wa

15、s approved by CENELEC as EN 61162-450 on 2011-07-15. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: late

16、st date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-04-15 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-07-15 Annex ZA has been added by CENELEC. _ Endorsem

17、ent notice The text of the International Standard IEC 61162-450:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60603-7 NOTE Harmonized as EN 60603-7. IEC 60

18、603-7-3 NOTE Harmonized as EN 60603-7-3. IEC 60603-7-7 NOTE Harmonized as EN 60603-7-7. IEC 61076-2-101 NOTE Harmonized as EN 61076-2-101. IEC 61162-2 NOTE Harmonized as EN 61162-2. IEC 61162-3 NOTE Harmonized as EN 61162-3. IEC 61754-20 NOTE Harmonized as EN 61754-20. IEC 61996-1 NOTE Harmonized as

19、 EN 61996-1. IEC 62388 NOTE Harmonized as EN 62388. _ BS EN 61162-450:2011 2 BS EN 61162-450:2011+A1:2016EN 61162-450:2011+A1:2016 3 BS EN 61162-450:2011+A1:2016EN 61162-450:2011+A1:2016The text of document 80/795/FDIS, future IEC 61162-450:2011/A1, prepared by IEC/TC 80 “Maritime navigation and rad

20、iocommunication equipment and systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61162-450:2011/A1:2016. The following dates are fixed: g120 latest date by which the document has to be implemented at national level by publication of an identical national standard o

21、r by endorsement (dop) 2017-02-05 g120 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-05-05 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be

22、 held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61162-450:2011/A1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be add

23、ed for the standards indicated: Addition: IEC 61174 NOTE Harmonized as EN 61174. Delete IEC 61996-1 NOTE Harmonized as EN 61996-1 Foreword to amendment A1IEEE 802.3 - IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area

24、networks - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - - g3ISOC RFC 768 - User Datagram Protocol - - g3ISOC RFC 791 - Internet Protocol - DARPA Internet Program Protocol Specification - - g3ISOC RFC 792 - Internet Control

25、 Message Protocol - - g3ISOC RFC 826 - Ethernet Address Resolution Protocol - - g3ISOC RFC 1918 - Address Allocation for Private Internets - - g3ISOC RFC 2474 - Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers - - g3ISOC RFC 5000 - Internet Official Protocol St

26、andards - - g3ISOC RFC 5227 - IPv4 Address Conflict Detection - - g3ISOC RFC 5424 - The Syslog Protocol - - g3NMEA 0183 2008 Standard for interfacing marine electronic devices - - g3- 3 - EN 61162-450:2011 Annex ZA (normative) Normative references to international publications with their correspondi

27、ng European publications BS EN 61162-450:2011Publication Year Title EN/HD Year IEC 60825-2 - Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) EN 60825-2 - g3IEC 60945 - Maritime navigation and radiocommunication equipment and systems - General requirements - Me

28、thods of testing and required test results EN 60945 - g3IEC 61162-1 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners EN 61162-1 - g3 4 BS EN 61162-450:2011+A1:2016EN 61162-450:2011+A1:2016- The following documents,

29、 in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Pu

30、blication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. IEC 61996-1 EN 61996-1 - Maritime navigation and radiocommunicat

31、ion equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: Performance requirements, methods of testing and required test results 2 61162-450 g148 IEC:2011(E) CONTENTS 1 Scope . 7 2 Normative references . 7 3 Terms and definitions . 8 4 General network and equipment requirements 11 4

32、.1 Network topology example 11 4.2 Basic requirements 12 4.2.1 Requirements for equipment to be connected to the network . 12 4.2.2 Additional requirements for network infrastructure equipment 12 4.3 Network function (NF) requirements 13 4.3.1 General requirements 13 4.3.2 Maximum data rate requirem

33、ents . 13 4.3.3 Error logging function 13 4.4 System function (SF) requirements 15 4.4.1 General requirements 15 4.4.2 Assignment of unique system function ID (SFI) 15 4.4.3 Implementing configurable transmission groups . 15 4.5 Serial to network gateway function (SNGF) requirements 16 4.5.1 General

34、 requirements 16 4.5.2 Serial line output buffer management 16 4.5.3 Datagram output requirements 17 4.6 Other network function (ONF) requirements 17 5 Low level network requirements 17 5.1 Electrical and mechanical requirements. 17 5.2 Network protocol requirements 19 5.3 IP Address assignment for

35、equipment . 19 5.4 Multicast address range 19 6 Transport layer specification . 19 6.1 General . 19 6.2 UDP messages 20 6.2.1 UDP multicast protocol 20 6.2.2 Use of multicast addresses and port numbers 20 6.2.3 UDP checksum 21 6.2.4 Datagram size . 21 7 Application layer specification 22 7.1 Datagra

36、m header 22 7.1.1 Valid header 22 7.1.2 Error logging 22 7.2 General IEC 61162-1 sentence transmissions . 22 7.2.1 Application of this protocol 22 7.2.2 Types of messages for which this protocol can be used . 22 7.2.3 TAG block parameters for sentences transmitted in the datagram . 22 7.2.4 Requirem

37、ents for processing incoming datagrams . 24 7.2.5 Error logging 24 7.3 Binary image transfer using UDP multicast 24 7.3.1 Application of this protocol 24 BS EN 61162-450:2011BS EN 61162-450:2011+A1:201661162-450 IEC:2011+A1:2016(E) 5 889121213131314141414161616161717171818181820202020202121212223232

38、32323232323232525252561162-450 g148 IEC:2011(E) 3 7.3.2 Binary image structure . 25 7.3.3 Header 25 7.3.4 Binary image descriptor structure 27 7.3.5 Binary image data fragment . 28 7.3.6 Sender process for binary image transfer 28 7.3.7 Receiver process for binary image transfer 29 7.3.8 Other requi

39、rements 30 7.3.9 Error logging 31 8 Methods of test and required results . 32 8.1 Test set-up and equipment 32 8.2 Basic requirements 32 8.2.1 Equipment to be connected to the network 32 8.2.2 Network infrastructure equipment 32 8.3 Network function (NF) . 32 8.3.1 Maximum data rate 32 8.3.2 Error l

40、ogging function 33 8.4 System function (SF) . 33 8.4.1 General . 33 8.4.2 Assignment of unique system function ID (SFI) 33 8.4.3 Implementing configurable transmission groups . 33 8.5 Serial to network gateway function (SNGF) . 33 8.5.1 General . 33 8.5.2 Serial line output buffer management 33 8.5.

41、3 Datagram output 34 8.6 Other network function (ONF) 34 8.7 Low level network 34 8.7.1 Electrical and mechanical requirements . 34 8.7.2 Network protocol . 34 8.7.3 IP address assignment for equipment 35 8.7.4 Multicast address range . 35 8.8 Transport layer 35 8.9 Application layer 35 8.9.1 Applic

42、ation 35 8.9.2 Datagram header . 35 8.9.3 Types of messages 36 8.9.4 TAG block parameters . 36 8.10 Error logging . 36 8.11 Binary image transfer using UDP multicast 37 8.11.1 Sender process test . 37 8.11.2 Receiver process test 38 8.11.3 Image descriptor test . 38 8.11.4 Image transfer error loggi

43、ng 38 Annex A (normative) Classification of IEC 61162-1 talker identifier mnemonics and sentences . 39 Annex B (informative) TAG block example . 45 Annex C (normative) Reliable transmission of command-response pair messages . 47 Annex D (informative) Network and system design guidance . 52 Bibliogra

44、phy 60 BS EN 61162-450:2011BS EN 61162-450:2011+A1:201661162-450 IEC:2011+A1:2016(E) 6 2626282929313233333334343434343434343535353535353636363636363737373737373839394040404147495462 4 61162-450 g148 IEC:2011(E) Figure 1 Network topology example . 12 Figure 2 Ethernet frame example for a SBM from a r

45、ate of turn sensor . 20 Figure C.1 Command response communications 47 Figure C.2 State diagram . 49 Figure D.1 General system design architecture 52 Figure D.2 Example of ship-shore communication architecture 53 Figure D.3 Security infrastructure 54 Figure D.4 Decoupled system 56 Figure D.5 Loosely

46、coupled system 56 Figure D.6 Strongly coupled system . 57 Table 1 Syslog message format . 14 Table 2 Syslog error message codes . 14 Table 3 Interfaces, connectors and cables . 18 Table 4 Destination multicast addresses and port numbers 21 Table 5 Destination multicast addresses and port numbers for

47、 binary data transfer . 21 Table 6 Destination multicast addresses and port numbers for other services 21 Table 7 Description of terms 25 Table 8 Binary image structure 25 Table 9 Header format . 26 Table 10 Binary image descriptor format 27 Table 11 Examples of MIME content type for DataType codes

48、. 28 Table 12 Binary image data fragment format 28 Table A.1 Classification of IEC 61162-1 talker identifier mnemonics 39 Table A.2 Classification of IEC 61162-1 sentences 41 Table B.1 Defined parameter-codes . 46 Table D.1 Overview of possible security functions 55 Table D.2 Network failure propaga

49、tion possibilities 58 BS EN 61162-450:2011BS EN 61162-450:2011+A1:201661162-450 IEC:2011+A1:2016(E) 7 g1 g213214951545556585859151519222222262627282929414348576061162-450 g148 IEC:2011(E) 7 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS DIGITAL INTERFACES Part 450: Multiple talkers and multiple listeners Ethernet interconnection 1 Scope This part of IEC 61162 specifies interface requirements and methods of test for high speed co