EN 61016-2001 en Helical-Scan Digital Component Video Cassette Recording System Using 19 mm Magnetic Tape (Format D-1)《使用19mm磁带(D-1格式)的螺旋扫描数字化器件盒式录像带录像系统　IEC 61016-1989+A1-1999》.pdf

《EN 61016-2001 en Helical-Scan Digital Component Video Cassette Recording System Using 19 mm Magnetic Tape (Format D-1)《使用19mm磁带(D-1格式)的螺旋扫描数字化器件盒式录像带录像系统　IEC 61016-1989+A1-1999》.pdf》由会员分享，可在线阅读，更多相关《EN 61016-2001 en Helical-Scan Digital Component Video Cassette Recording System Using 19 mm Magnetic Tape (Format D-1)《使用19mm磁带(D-1格式)的螺旋扫描数字化器件盒式录像带录像系统　IEC 61016-1989+A1-1999》.pdf（89页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1) The European Standard EN 61016:2001 has the status of a British Standard ICs 33.160.40 BS EN 61016:2001 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN

2、61016:ZOOl Amd. No. National foreword Date Comments This British Standard is the official English language version of EN 61016:2001. It is identical with IEC 61016:1989 (incorporating Amendment 1:1999). The UK participation in its preparation was entrusted to Technical Committee EPU100, Audio, video

3、 and multimedia systems and equipment, which has the responsibility to: - - aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European

4、 developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60037-1. For a

5、period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue

6、 under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their corre

7、ct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and St

8、rategy Committee on 10 October 2001 Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 86, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued

9、 since publication Q BSI 10 October 2001 ISBN O 580 38534 5 EUROPEAN STANDARD EN 61016 NORME EUROPENNE EUROPISCHE NORM August 2001 ICs 33.160.40 English version Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-I) (IEC 61016:1989 + Al:1999) Systme de

10、magntoscope numrique composantes cassette balayage hlicodal utilisant la bande magntique de 19 mm (format D-I) (CE1 61016:1989 + Al:1999) Videokassettensystem mit Schrgspuraufzeichnung digitaler Komponenten auf Magnetband 19 mm (D-I -Format) (IEC 61016:1989 + Al:1999) This European Standard was appr

11、oved by CENELEC on 2000-08-01. CENELEC members are bound to comply with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Upto-date lists and bibliographical references concerning such natio

12、nal standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language

13、 and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spai

14、n, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels O 2001 CENELEC - All rights of exploi

15、tation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61016:2001 E Page 2 EN 61016:2001 Foreword The text of the International Standard IEC 61016:1989 and its amendment 1:1999, prepared by the former SC 60B and SC IOOB, Recording, of IEC TC 100, Audio, video and mul

16、timedia systems and equipment, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 61016 on 2000-0801 without any modification. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national

17、 standard or by endorsement - latest date by which the national standards conflicting with the EN have to be withdrawn Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. (dop) 2002-03-01 (dow) 2003-08-01 E

18、ndorsement notice The text of the International Standard IEC 61016:1989 and its amendment 1:1999 was approved by CENELEC as a European Standard without any modification. O BSI 10 October 2001 Page 3 EN 61016:ZOOl CONTENTS . Clause SECTION ONE . GENERAL Page I . 2 . 3 . 4 . 5 . 6 . 7 . 8 9 . 1 o . Sc

19、ope 6 Object 6 Environment and test conditions 6 SECTION TWO -VIDEOTAPE CASSETTE Mechanical parameter . 6 4.1 Cassette dimension 6 4.2 Identification of cassettes 7 4.3 Tape lengths, thickness and play times . 7 4.4 Face of magnetic coating 7 4.5 Datum planes 7 4.6 Window and labels 16 4.7 Identific

20、ation holes . 21 4.8 Leader/ trailer tape 25 4.9 Reels . 25 4.10 Lid . 31 Video tape specification . 35 5.1 Base 35 5.2 Width . 35 Reference edge deviation . 35 5.6 Transmissivity 35 Offset yield strength 35 5.9 Coating coercivity 35 5.1 O Oxide orientation . 36 5.3 Width fluctuation 35 5.4 5.5 Tape

21、 thickness 35 5.7 5.8 Magnetic coating . 35 SECTION THREE . HELIGAL RECORDINGS Tape speed 36 Record location and dimension 36 Tolerance zones. centrelines 38 Relative positions of recorded signals . 39 10.1 Cue track. control track. time code track . 39 10.2 Helical track . 39 Helical track record c

22、urvature 38 8.1 Gap azimuth 39 O BSI 10 October 2001 Page 4 EN 610162001 Clause SECTION FOUR . PROGRAM TRACK Page DATA ARRANGEMENT 11 . 12 . 13 . 14 . 15 . 16 . 17 . 18 . 19 . 20 . 21 . 22 . 23 . 24 . 25 . 26 . 27 . 28 . 29 . 30 . 31 . Introduction 41 Labelling convention 41 Sector details . 41 13.1

23、 Sync block . 41 13.2 Sync pattern 41 13.3 Identification pattern 42 13.4 Data field . 43 13.5 Sector preamble 45 13.6 Sector postamble 45 Edit gaps 45 Channel codes . 45 Magnetization 45 SECTION FIVE -VIDEO PROCESSING Recorded data . 52 17.1 Recorded lines 52 17.2 Digital active lines 52 Source pre

24、coding . 52 Sample labelling 53 Intersector distribution . 53 Intrasector shuffling . 54 21 .I Intraline shuffle 54 21.2 Sector array shuffling 55 Outer code error protection 60 SECTION SIX . AUDIO PROCESSING Introduction . 70 Source coding 70 Source processing . 70 25.1 Introduction . 70 25.2 Segme

25、nt 70 25.3 Audio data word processing 71 Interface control words 74 26.1 Channel use (CHAN) - 4 bits 75 26.2 Pre-emphasis (PREF) - 4 bits . 76 26.4 Block sync location S MARK O, S MARK 1-8 bits 77 Processing control words . 78 27.1 Word count (B.CNT) - 4 bits . 78 27.2 Overlap edit (E LAP) - 4 bits

26、. 78 27.3 Sequence (SEQN) - 4 bit 79 User control words (UCW) 79 Inner protection and channel coding 80 26.3 Audio data word mode (LNGH) - 4 bits . 77 Outer error protection 79 Order of transmission to inner coding 80 O BSI 10 October 2001 Clause Page 5 EN 61016:2001 Page 32 . Sector usage 81 SECTIO

27、N SEVEN . CONTROL. CUE AND TIME CODE TRACK RECORDING 33 . Control track 82 33.1 CT signals structure 82 33.2 CT magnetic orientation 82 33.3 CT flux level . 82 33.4 Relation CT/helical track . 82 34.1 Method of recording 83 34.3 Recorded flux characteristics 83 34.4 Rep rod ucer f luxlf reque ncy re

28、sponse . 83 Time code track 85 35.1 Method of recording . 85 Longitudinal time code recording . 85 36.1 Structure of the time code signal . 85 36.2 Recording characteristics 85 36.3 Time relationship of time code and digital video 85 36.4 Longitudinal position of the time code record 85 . 34 . Cue t

29、rack . 83 34.2 Flux level . 83 34.5 Relative timing . 83 35 . 35.2 Flux level . 85 36 . O BSI 10 October 2001 Page 6 EN 61016:2001 HELICAL-SCAN DIGITAL COMPONENT VIDEO CASSEITE RECORDING SYSTEM USING 19 mm MAGNETIC TAPE (FORMAT D-1) SECTION ONE - GENERAL 1. Scope This standard is applicable to magne

30、tic recording of one digital video and four digital audio signals using 19 rnm tape cassettes. it is valid for TV signals in digital component form, generated according to the rules of the CCIR Recommendations 601 and 656 and for digital audio signals according to 1EC Publication 958. This standard

31、also describes the digital recording of ancillary data and the analog recording of one cue track and the control track. 2. Object The object of this standard is to define the electrical and mechanical characteristics of equipment which will provide for the inkrchangeability of recorded cassettes. I

32、he requirements given relate to 525/60 and 625/50 TV systems. 3. Environment and test conditions lests and measurements made on the system to check the requirements of this standard shall be carried out under the following conditions: temperature: 20 k 1 “C relative humidity: 50 k 2% barometric pres

33、sure: 86 kPa to 106 kPa tape tension: 0.8 ; (2541 L 2 “i 0.5 max. I n Section AA Section BB R 0.5 max. I Section CC 63/!85 Dimensions in millimetres FIGURE 8 - Bottom view of D-1M cassette O BSI 10 October 2001 Page 16 EN 61016:2001 Lid lock and release (see Figure 21) W Datum plane Y 63.5 I 0.3 197

34、.5 * 0.3 R 0.5 max. R 0.5 max. Section AA Scction BB Section CC Dimensions in millimetres FIGURE 9 - Bottom view of D-1L cassette 4.6 Window ana labels 4.6.1 Window and label areas shall be as specified in Figures 10 to 12, pages 33 to 37. 632illY O BSI 10 October 2001 Page 17 EN 61016:2001 4.6.2 La

35、bels attached to the cassette shall not extend beyond the external dimensions as shown in Figurcs 10 to 12. 4.6.3 Labels shall not interfere with users or manufacturers identification holes. 4.6.4 Labels shall not interfere with the hub drive and support mechanism. O BSI 10 October 2001 Page 18 EN 6

36、1016:ZOOl F E I IEC 212/99 Section BB o? c N a P Detail of A Key: C Depth: 0.2 to 0,3 (see note 4) J Picker notch D Datum plane Y K Depth: 0.2 to 0,3 (see note 5) E Datum plane 2 L Picker notch F Window areallabel area (see note 1) M Depth: 0,2 to 0,3 (see note 2) G 4 user plugs (see figure 13) N De

37、pth: 0,2 to 0,3 (see note 3) H Datum plane X O Detent and misinsertion notch I Depth: 0,2 to 0,3 (see note 2) P Configuration-optional user plug (2) NOTE 1 - The cross-hatched area is available for the window/labels. NOTE 2 - The side label may be attached to this recessed area. NOTE 3 - The rear la

38、bel may be attached to this recessed area. NOTE 4 - The lid label may be attached to this recessed area. NOTE 5 - The top label may be attached to this recessed area. Dimensions in rnillirnetres Figure 10 - Top and side view of cassette S O BSI 10 October 2001 Page 19 EN 61016:2001 G I/ I 383 c-i IE

39、C 213/99 ey: C Datum plane Y D Datum plane X E F Datum plane Z G H 4 user plugs (see figure 13) Depth 0,2 to 0.3 (see note 2) Depth 0,2 to 0,3 (see note 5) NOTE 1 - The cross-hatched area is available for the window/labels. NOTE 2 - The side label may be attached to this recessed area. NOTE 3 - The

40、rear label may be attached to this recessed area. NOTE 4 - The lid label may be attached to this recessed area. NOTE 5 - The top label may be attached to this recessed area. I J Section BB M Detail of A I See figure 17 J Depth: 0,2 to 0,3 (see note 2) K Depth: 0,2 to 0,3 (see note 3) L Detent and mi

41、sinsertion notch M Configuration-optional user plug (2) Dimensions in millimetres Figure 11 - Top and side view of cassette M O BSI 10 October 2001 Page 20 EN 61016:ZOOl Detail of C N EC 2/4/99 ,ey: D Datum plane Y E Datum plane 2 K Datum plane X L See figure 17 Seclion BB Detail of A F Datum plane

42、X M Depth: 0.2 to 0.3 (see note 5) G Depth: 0.2 to 0,3 (see note 2) H Datum plane 2 O Depth: 0,2 to 0,3 (see note 3) I Window areallabel area (see note 1) P Detent and misinsertion notch J 4 user plugs (see figure 13) Q Configuration-optional user plug (2) NOTE 1 - The cross-hatched area is availabl

43、e for the window/labels. NOTE 2 - The side label may be attached to this recessed area. NOTE 3 -The rear label may be attached to this recessed area. NOTE 4 - The lid label may be attached to this recessed area. NOTE 5 - The top label may be attached to this recessed area. Depth: 0.2 to 0,3 (see not

44、e 4) N Dimensions in millimeires Figure 12 - Top and side view of cassette L O BSI 10 October 2001 Page 21 EN 61016:2001 1.7 Identificafiori holes 4.7.1 There shall be two sets of idcntificatiort holes; one for use by the manufacturer and the other for the user. 4.7.2 Manufacturers coding holes, det

45、ailed in Figures 13 to 15, shall be defined as follows: Holes 1 and 2 shall be used in combination to indicate tape thickness according to the following logic table : Hole numbers: 1 2 O O = 16 pin tape U 1 = 13 pm tape 1 O = Undefinedreserved 1 1 = Undcfinedreserved 4.7.3 Holes 3 and 4 shall be use

46、d to indicate the coercivity of rhe magnetic recording tape. Hole numbers: 3 4 O O = Class 850 O 1 = Undefinedreserved 1 O = Undefinedreserved 1 1 = Undefinedheserved 4.7.4 A O in the above tables indicates that the indicator tab is removed or open, an undetccted state by the recordcrlplayer sensor

47、mechanism. 4.7.5 The dimension and location of the users holes specified in Figures 13 to 15 shall be defined as follows: 4.7.6 When a O state exists, the user holes shall identify the following conditions: 1) total record lock out (audio, video, cue, time code, control track); 2) reserved and undef

48、ined; 3) reserved and undcfined; 4) reserved and undefined. 4.7.7 Jhe user plug mechanism shall withstand an axial force of 0.5 N. O BSI 10 October 2001 Page 22 EN 61016:2001 1 m -User plug (2) # 67 ? 0.2 cec User hole (2) ,/ 1 LDatumpianeX ,/ 1 130.5 k 0.3 Luser hole (4) (Datum hole) / Luser hole (

49、3) (Datum hole) Datum plane 2 f Notc 3 Detection level (1) Note 3 8 min. Detection level (1) Detection levei (O) Section CC r *- a .G a .- .y Details of A IEC 219/99 etection level (1) Section BB 616i.S Dimensions in millimetres FIGURE 13 - D-1S cassette coding holes and user holes Nom 1. - Thc cassette shall he provided with four coding holes (i) to (4) and four user hules (1) to (3). Wien any plug is removed, the opcning shall he as phown in detail A. lhe user plug (1) shall be green. 2. - User holes (3)and (4) on the upper shell shall be op