EN 60908-1999 en Audio Recording - Compact Disc Digital Audio System《音频录制 压缩光盘数字音频系统 IEC 60908-1999》.pdf

《EN 60908-1999 en Audio Recording - Compact Disc Digital Audio System《音频录制 压缩光盘数字音频系统 IEC 60908-1999》.pdf》由会员分享，可在线阅读，更多相关《EN 60908-1999 en Audio Recording - Compact Disc Digital Audio System《音频录制 压缩光盘数字音频系统 IEC 60908-1999》.pdf（110页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60908: 1999 IEC 60908:1999 Audio recording - Compact disc digital audio system The European Standard EN 609081999 has the status of a British Standard ICC33.160.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW STD-BSI BS EN b0908-ENGL 1999 = 1b2qbb9 07

2、75178 bOL AmdNo. Date BS EN 60908:1999 Text af?ected National foreword This British standard is the English language version of EN 609081999. It is identical with IEC 60908: 1999. It supersedes BS EN 60908: 1993 which will be withdrawn on 2001-11-01. The UK participation in its preparation was entru

3、sted by Technical Committee EPU100, Audio, Video and Multimedia Systems and Equipment, to Subcommittee EPU100/2, Recording, which has the responsibility to: - aid enquirem to understand the text; - present to the responsible intedonaliEuropean committee any enquiries on the interpretation, or propos

4、als for change, and keep the UK interests informed; - monitor related intemational and European developments and promulgate them in the UK A list of organizations represented on this committee can be obtained on request to its secreay From 1 January 1997, all IEC publications have the number 60000 a

5、dded to the old number. For instance, EC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards

6、 normally include am annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the se

7、ction entitled “International Standards Correspondence Index“, or by using the “Find“ facilim of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract Users of British Standards are responsible for their correct application.

8、 Compliance with a British Standard does not of itself confer immunity from legal obligations. This British Standard, having been prepared under the direcion of the Electrotechnical Sector Committee, was published under the authoritv of the Summary of pages Standards hnunikee and comes into effect o

9、n 15 May 1999 This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 107 and a back cover. O BSI 05-1999 - I ISBN O 680 32517 2 STD.BS1 BS EN b0708-ENGL 1777 Lb24bb 0775199 548 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60908 March 1999 ICs 33.160.30 Su

10、persedes EN 60908:1992 + A1:1993 Descriptors: Optical recording, sound recording, compact disc, characteristic, interchangeability, measurement, requirement English version Audio recording Compact disc digital audio system (IEC 60908: 1 999) Enregistrement audio Tonaufzeichnung Systme audionumrique

11、disque compact (IEC 60908:1999) (CE1 60908: 1 999) Digital-Audio-System Compact Disc This European Standard was approved by CENELEC on 1998- 10-01. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status

12、 of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A

13、 version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic

14、, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elekt

15、rotechnische Normung Central Secretariat: rue de Stassari 35, B - 1050 Brussels 1999 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60908: 1999 E STD-BSI BS EN b908-ENGL 1999 M Lb24bb 0775200 0qT D Page 2 EN 60908:1999 Foreword T

16、he text of document 1 OOB/173/FDIS, future amendment to IEC 60908:1987, prepared by SC 1008, Recording, of IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 60908:1992 on 1998-1 0-01, The te

17、xt of this document, together with that of IEC 60908: 1 987 and its amendment 1 : 1 992, was published by IEC as the second edition of IEC 60908 in February 1999. According to a decision of principle taken by the Technical Board of CENELEC, the approval of EN 60908:1992/A2 has been converted into th

18、e approval of a new EN 60908. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dp) 1999-1 1-01 - latest date by which the national standards conflicting with the EN have to be wit

19、hdrawn (dow) 2001-1 1-01 Annexes designated “normative“ are part of the body of the standard. Annexes designated “informative“ are given for information only. In this standard, annexes B and ZA are normative and annexes A, C, D, E and F are informative. Annex ZA has been added by CENELEC. Endorsemen

20、t notice The text of the International Standard IEC 60908:1987 was approved by CENELEC as a European Standard without any modification. STD.BS1 BS EN b0908-ENGL 1999 m lb2qbb7 0775203 T2b m Page 3 EN 60908:1999 CONTENTS CIauie Papa 1 Scope and object . 7 7 2 Normative references . 3 Description o! s

21、ystem . 8 4 Requirements for measurements 8 4.2 Requirements for the measuring pick-up . 8 5 Mechanical parameters 9 9 5.1 Outer dimensions of disc . 5.2 Centre hole dimensions . 9 5.3 Thickness of disc 9 5.5 Reference plane 9 5.6 Clamping area . 9 5.7 Mas8 of dirc 10 5.8 Limits for the deflections

22、of the read-out side of the disc 10 6.1 Thickness of transparent substrate 10 6.2 Refractive index 10 6.3 6.4 6.6 4.1 Conditions of measurement . 8 4.3 Requirements for the clamping of the disc . 9 5.4 Labelling . 9 6 Optical parameters . 10 Limits for the angular deviation of the reflected beam (u)

23、 . 10 Birefringence of transparent substrate . 10 6.5 Reflectivity 10 7 Recording parameters 10 Rotation during playback . 10 Limits for reflectivity variation in program area . 10 7.1 7.2 Track 10 7.3 Limits for deviations of information layer perpendicular to reference plane . 11 7.4 Limits for ra

24、dial deviations of the track 11 Environmental condition8 for playing the compact disc 11 8.1 Playing the compact disc . 11 8.2 Temperature and humidity requirements 11 9.1 Measurement conditions . 12 0.2 Modulation amplitude 12 9.3 Signal asymmetry 12 9.5 Frequency modulation of the channel bit freq

25、uency (see clause 13) . 12 10 Radial differential (RD) signal . 13 1 O 1 Measurement conditions 13 10.2 Shape of the radial differential signal . 13 10.3 Sensitivity to radial offset 13 10.4 Noise 13 8 9 High-frequency signal . 12 9.4 CrOS6-talk . 12 . . Q ES1 05-1999 Page 4 EN 60908:1999 Cliur. 11

26、Defects 14 11.1 Block error rate (BLER) . 14 11.2 Local defects 14 12 General -Recorded parametem . 14 13 Eight to 14 modulation code (EFM-code) 15 14 Fnme format . 16 15 EFM-modulator 16 16 Error corredion 16 16.1 General . 16 16.2 StniCtUm . 17 16.3 CIRC encoder and decoder . 17 17.1 Qeneraf . 17

27、17.2 Data format . 18 17.3 Subcode structure . 18 17.4 Channel p . 18 17.5 Chrnnel Q . 19 17.6 Channel8 R to W inclusive . 23 19 General data organization 23 19.1 Basic format 23 19.2 PACK format . 24 10.3 Error correction parity P 24 10.4 Interleaving . 25 19.5 Pparity encoder and interleave iequen

28、ce . 25 19.8 Q-parity encoder . 26 19.9 Q-parity decoder . 26 20 ZERO mode (MODE = O. ITEM = O) 26 20.1 General . 26 20.2 ZERO mode PACK format . 26 21 LINE GRAPHICS mode (MODE = 1, ITEM = O) . 27 21.1 eneral . 27 21.2 LINE-GRAPHICS mode PACK format 27 21.3 LINE-GRAPHICS mode FONT format 28 21.4 LIN

29、E-GRAPHICS mode SCREEN format . 28 21.5 LINE-GRAPHICS mode colour table 29 21.6 LINE-GRAPHICS mode instructions 29 22 TV-GRAPHICS mode (MODE = 1. ITEM = 1) . 31 22.1 General . 31 22.2 TV-GRAPHICS mode PACK format . 31 22.3 TV-QRAPHICS mode FONT format . 32 22.4 TV-GRAPHICS mode SCREEN format 32 22.5

30、 TV-GRAPHICS mode instructions 33 . 17 Subcodeicontrol and displry 6ystem 17 18 General 23 10.6 P-parity decoder and . 76 Figure 11 - Parity check matrice8 . 77 Figure 12 - CIRC encoder 78 STD-BSI BS EN b090-ENGL 1999 1b24bb 077520q 735 Page 6 EN 60908:1999 Pig Figure 13 . CIRC dwoder . 79 80 . Figu

31、re 14 . Example of encoding in channels P and Q Figure 15 . Example of encoding of table of contenta with six track8 (program items) 81 Figure 17 - Operating condition8 of dirc Figure 18 - Time error versua modulation frequency 84 Figure 19 - Basic format subcode channels R to W . 85 Figure 16 - Ang

32、ular deviation 82 83 Figure M - General organization of a PACK 86 Figure 21 - P-parity and interleave sequence . 87 Figure 22 - P-parity and de-interleave sequence 88 Figure 23 - Q-parity encoder . 89 Figure 24 - Q-parity decoder . 90 Figure 25 - Block diagram of a viddgraphior mixing unit 91 91 91

33、Figure 28 - CD TEXT mode PACK format for the hd-in area 91 Figure 20 - CO TEXT mode PACK format for the program area . 92 Figure 30 - Example of partial intotleaving of PACKS 92 Figure 31 - Maximum illowcsd mode tranrition skew 92 Figure D.1 - Adaptor including disc 97 Figure F.l - Memory organizati

34、on of EXTENDED TV-GRAPHICS 102 Figure F.2 - CLUT structure of EXTENDED TV-GRAPHICS . 103 Figure F.3 - Relationrhip of coloum between TV-GRAPHICS and EXTENDED TV-CIRAPHICS . 104 Figure 28 - Example of encoding 3 bytes in 4 SYMBOLS . Figure 27 - Text group and BLOCK rtructure . O BSI 05-1999 Page 7 EN

35、 60908:1999 AUDIO RECORDING - COMPACT DISC DIGITAL AUDIO SYSTEM - 1 Scope and object This standard is applicable to a prerecorded optical reflective digital audio disc system. This standard defines those parameters of compact disc that affect interchangeability between discs and players. It is also

36、intended as a reference for manufacturers wishing to produce discs and/or players that conform to the system described in this standard. It deals with discs of 80 mm in diameter as well as those of 120 mm in diameter. 2 Normative references The following normative documents contain provisions which,

37、 through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possib

38、ility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IEC and IS0 maintain registers of currently valid International Standards. IEC 60068-2-2:1974, Environmental tes

39、ting - Part 2: Tests - Tests 6: Dry heat IEC 60068-2-30:1980, Environmental testing - Part 2: Tests - Test Db and guidance: Damp heat, cyclic (12 + IPhour cycle) IEC 60721 -3-5: 1997, Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their

40、severities - Section 5: Ground vehicle installations IEC 61104:1992, Compact disc video system - 12cm CD-V IEC 61 866: 1997, Audiovisual systems - Interactive text transmission system (ITTS) IEC 61938:1996, Audio, video and audiovisual systems - Interconnections and matching values - Preferred match

41、ing values of analogue signals ISO/IEC 646:1991, Information technology - IS0 7-bit coded character set for information interchange IS0 3901 :1986, Documentation - International Standard Recording Code (ISRC) ISOiIEC 8859-1 : 1998, Information technology - 8-bit single-byte coded graphic character s

42、ets - Part 1: Latin alphabet No. 1 BU Tech 3258-E:1991, Specification of the systems of the MACipacket family UPC/EAN, Universal product code/lnternational article numbering association RIAJ Document RS506, Music shift Kanji character set CD EXTRA, Enhanced music CD specification, Version 1 .O, Dece

43、mber 1995, Sony/Philips STD - BSI BS EN b090-ENGL 1999 9 lb24bb7 077520b 508 Page 8 EN 60908:1999 3 Description of system The information carrier is a transparent disc, the substrate, one side of which carries the information. This side, the encoded side, is covered in turn by a reflective and a pro

44、tective layer. The information of the disc is stored in a spiral-shaped track consisting of successive shallow depressions (pits). When the disc is playing and viewed from the read-out side, the spiral starts near the centre of the disc and finishes near its edge. The lengths of the pits and the spa

45、ces between them can take discrete values only, and represent the encoded two-channel audio information. The information is read out by means of a beam of light which passes through the plain, .e. the non-encoded side of the transparent disc to the encoded side, where it is reflected and modulated b

46、y the recorded information (see figure 2b, detail E). The information is followed by means of a servo-system for tracking and focusing. 4 Requirements for measurements 4.1 Conditions of measurement Measurements and mechanical checks shall be carried out within the following limits unless otherwise s

47、pecified: - ambient temperature: - relative humidity: - air pressure: 15 “C to 35 “C; 45 % to 75 %; 86 kPa to 106 kPa. 4.2 The optical pick-up to be used for disc measurement shall comply with the following requirements: - wavelength: 780 * 10 nm; - polarization: circular; - numerical aperture (NA):

48、 0,45 I 0,Ol; Requirements for the measuring pick-up - intensity at the rim of the pupil of the objective lens: - diffraction limited performance of the optical system: 50 % of the maximum intensity value; within the Marchal criterion, preferably equally divided between disc and player. Parameters t

49、o be specified 5 5.1 5.1.1 5.1.2 5.1.3 5.2 5.2.1 5.2.2 5.2.3 5.3 5.4 5.4.1 5.4.2 5.5 5.6 5.6.1 5.6.2 5.6.3 5.6.4 5.6.5 - - - or 8 cm-CD, see figures 2c and 2d. 15 0. mm To be measured at 23 i 2 C and (50 * 5) % relative humidity Ring between diameters of 26 mm and 33 mm (see figures 2a and 2b) On the read-out side Page 9 EN 60908:1999 4.3 The disc shall be fixed between two equally sized concentric rings, having inner diameters of 29 mm and outer diameters of 31 mm, the clamping force being between 1 N and 2 N (see Requirements for the clamping of th