EN 60335-2-66-2003 en Household and similar electrical appliances - Safety Part 2-66 Particular requirements for water-bed heaters (Incorporates Amendment A2 2012)《家用和类似用途电器的安全 第2-.pdf

《EN 60335-2-66-2003 en Household and similar electrical appliances - Safety Part 2-66 Particular requirements for water-bed heaters (Incorporates Amendment A2 2012)《家用和类似用途电器的安全 第2-.pdf》由会员分享，可在线阅读，更多相关《EN 60335-2-66-2003 en Household and similar electrical appliances - Safety Part 2-66 Particular requirements for water-bed heaters (Incorporates Amendment A2 2012)《家用和类似用途电器的安全 第2-.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60335-2-66:2003+A2:2012Incorporating corrigendum July 2004Household and similar electrical appliances Safety Part 2-66: Particular requirements for water-bed heatersICS 97.030nullnull nullnullnullnullnullnullnull nullnullnullnullnullnullnull nullnullnull nullnullnullnullnullnu

2、llnullnullnullnull nullnullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnull nullnullnullNational forewordThis British Standard is the UK implementation of EN 60335-2-66:2003+A2:2012. It is identical to IEC 60335-2-66:2002.incorporating corr

3、igendum July 2004, and amendments 1:2008 and 2:2011. It supersedes BS EN 60335-2-66:2003+A1:2008, which will be withdrawn on 4 October 2014.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IE

4、C amendment. For example, text altered by IEC amendment 1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/07, Safety of electric appliances - Heated appliance group.A

5、 list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity fro

6、m legal obligations.BS EN 60335-2-66:2003+A2:2012This British Standard waspublished under the authorityof the Standards Policy andStrategy Committeeon 15 April 2003 The British Standards Institution 2012. Published by BSI Standards Limited 2012.Amendments/corrigenda issued since publicationAmd. No.

7、Date Comments 15351Corrigendum No. 124 August 2004 Correction to Subclause 3.1.930 November 2008 Implementation of IEC amendment 1:2008 with CENELEC endorsement A1:200830 April 2012 Implementation of IEC amendment 2:2011 with CENELEC endorsement A2:2012.ISBN 978 0 580 73831 9EUROPEAN STANDARD NORME

8、EUROPENNE EUROPISCHE NORM CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form

9、and by any means reserved worldwide for CENELEC members.Ref. No. EN 60335-2-66:2003 EICS 97.100.10 Supersedes EN 60335-2-66:2003+ A1:2008English version Household and similar electrical appliances - SafetyPart 2-66: Particular requirements for water-bed heaters (IEC 60335-2-66:2002)Appareils lectrod

10、omestiques et analogues -Scurit Partie 2-66: Rgles particulires pour les dispositifs de chauffagepour matelas eau (CEI 60335-2-66:2002)Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-66: Besondere Anforderungen fr Wasserbett-Beheizungen (IEC 60335-2-66:2002)This European

11、Standard was approved by CENELEC on 2003-03-01. CENELEC members arebound to complywith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references conce

12、rning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into i

13、ts own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Neth

14、erlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. y4002 +AEN 60335-2-66:2003 2March 2012ForewordThe text of the International Standard IEC 60335-2-66:2002 (61/2175/FDIS), prepared by the IEC Technical Committee 61, was submitted to the Unique Acceptance Procedure an

15、d was approved byCENELEC as EN 60335-2-66 on 2003-03-01. This European Standard replaces EN 60335-2-66:1995 + A1:2001. The following dates are applicable: -latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 200

16、4-03-01 -date on which national standardsconflicting with the EN have to be withdrawn (dow) 2006-03-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of th

17、at standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into t

18、he European Standard: Safety requirements for electric water-bed heaters.When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as farasisreasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text ofPart 1 is to be adap

19、ted accordingly.NOTE 1 The following numbering system is used:- subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;- unless notes are in a new subclause or involve notes in Part 1,they are numbered starting from 101, including those in a replaced cla

20、use or subclause;- additional annexes are lettered AA, BB, etc.;- subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.NOTE 2 The following print types are used:- requirements: in roman type; - test specifications: in italic type ;- notes: in

21、small roman type.Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold.There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 6033

22、5-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. _ Page 2BS EN 60335-2-66:2003+A2:2012 EN 60335-2-66:2003+A2:2012 (E)Foreword to amendment A1The text of document 61/3534/FDIS, future amendment 1 to IEC 60335-2-66:2002, prepared byI

23、EC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-66:2003 on 2008-05-01.The following dates are applicable:-latestdate by which the amendment has to beimplemented

24、at national level bypublication ofan identical national standard or by endorsement (dop) 2009-02-01-date on which national standards conflicting with the amendment have to be withdrawn(dow) 2013-05-01This amendment supplements or modifies the corresponding clauses of EN 60335-2-66:2003.There are no

25、special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _Endorsement noticeThe text of amendment 1:2008 to the International Standard IEC 60335-2-66:2002 was approved byCENELEC as an amendment to the European Standard without any mod

26、ification. _Page 3Introduction An investigation by CENELEC TC 61 has shown that all risks from pr oducts within the scope of thisstandard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directi

27、ve, 98/37/EC, has shown that the risksare mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard togetherwith the principal objectives of the Low Voltage Directive. _ E

28、ndorsement notice The text of the International Standard IEC 60335-2-66:2002 was approved by CENELEC as a European Standard without any modification. In the Bibliography, add the following note to the standard mentioned:ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified).BS EN 60335-2-

29、66:2003+A2:2012 EN 60335-2-66:2003+A2:2012 (E)ACZ xenn (ronitamv)evitamroNe ni ot secnerefersnoitacilbup lanoitanret wisnoitacilbup naeporuE gnidnopserroc rieht ht cilbuPnoita Yrae iTtle DH/NE YraeOSI 9342 )1 Flxec elbieralull ylopmreci maretisla reteDmfo noitani rahsends (inoitatnedn cet)euqinhOSI

30、NE 9342 0002 )2)1 tadnufer decneree )2 laviide dtita no tadfo e isseu Page 4Foreword to amendment A2 The text of document 61/4101/CDV, future edition 2 of IEC 60335-2-66:2002/A2, prepared by IEC/TC 61 “Safety of household and similar electrical appliances“ was submitted to the IEC-CENELEC parallel v

31、ote and approved by CENELEC as EN 60335-2-66:2003/A2:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-09-02 latest date by which the national standards conflict

32、ing with the document have to be withdrawn (dow) 2014-10-04 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The tex

33、t of the International Standard IEC 60335-2-66:2002/A2:2011 was approved by CENELEC as a European Standard without any modification. BS EN 60335-2-66:2003+A2:2012 EN 60335-2-66:2003+A2:2012 (E)CONTENTSINTRODUCTION.61 Scope.72 Normative references.73 Definitions 84 General requirement.85General condi

34、tions for the tests86 Classification 97Marking and instructions.98 Protection againstaccessto live parts109Starting of motor-operated appliances1010 Power input and current . 1011 Heating 1012 Void.1 113 Leakage current and electric strength at operating temperature1 114 Transient overvoltages .1 11

35、5 Moistureresistance1 116 Leakage current and electric strength.1 117 Overload protection of transformers and associated circuits.1 218 Endurance1219 Abnormaloperation1 220 Stabilityand mechanical hazards .1 221 Mechanical strength .1 222 Construction.1323 Internal wiring.1324 Components.1325 Supply

36、 connection and external flexible cords 1 326 Terminals for external conductors.1 427 Provision for earthing.1 428 Screws and connections.1 429 Clearances, creepage distancesand solidinsulation1 430 Resistanceto heat and fire.1 531 Resistancetorusting1 532 Radiation, toxicityand similar hazards1 5An

37、nexes.17Bibliography17Figure 101 Wood block1 6Page 5BS EN 60335-2-66:2003+A2:2012 EN 60335-2-66:2003+A2:2012 (E)INTRODUCTION It has been assumed in thedrafting of this International Standard that the execution ofitsprovisions is entrusted to appropriately qualified and experienced persons.This stand

38、ardrecognizesthe internationally accepted levelof protection against hazardssuchas electrical, mechanical, thermal,fire and radiation of appliances when operated as in normal use taking intoaccount the manufacturers instructions. It also coversabnormalsituations thatcan be expectedinpractice and tak

39、es into account the way in whichelectromagnetic phenomena can affect the safe operation of appliances.This standard takes into accountthe requirements of IEC 60364 as far as possible sothatthere is compatibilitywith the wiring ruleswhen the appliance is connected to the supply mains. However, nation

40、al wiring rules may differ.If an appliance within the scope of this standard also incorporates functions that are coveredfar as is reasonable. If applicable, the influence of one function on the other is taken into account.An appliance that complieswith the text of this standard will not necessarily

41、 be considered to comply with the safetyprinciples of the standard if, when examined and tested,itis found tohave other features that impair the level of safetycovered bythese requirements.An appliance employing materials or having forms of construction differing from those detailedin the requiremen

42、ts of this standard may be examined and testedaccordingto theintentofthe requirements and, if foundtobe substantially equivalent, may be considered to complywith the standard. in Part1, Part 1 applies. NOTE 1 not necessary to specify particular requirements for the appliance in question over and abo

43、ve the generalrequirements.This standard isa product family standard dealingwith the safety of appliancesand takesprecedence over horizontal andgeneric standards covering the same subject.NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken intocons

44、ideration when developing the general and particular requirements for the IEC 60335 series of standards. Forexample, in the case of temperature requirements for surfaces on many appliances, generic standards, such asPage 6by another Part 2 of IEC 60335, the relevant Part 2 is applied to each functio

45、n separately, asWhen aPart 2 standard does notincludeadditional requirements to coverhazards dealt withThis means that the technical committees responsible for the Part 2 st andards have determined that it isISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 orPart 2 standards.BS

46、 EN 60335-2-66:2003+A2:2012 EN 60335-2-66:2003+A2:2012 (E):2003 6 HOUSEHOLDAND SIMILAR ELECTRICALAPPLIANCES SAFETY Part 2-66: Particular requirements for water-bed heaters 1 Scope This clauseof Part 1 is replaced by the following.This International Standard deals with thesafety of electric water-bed

47、 heaters and theirassociated control units, for household and similar purposes, their rated voltage being notmore than 250 V.Appliances not intended for normal householduse,but that nevertheless maybe a source ofdanger to the public, such as appliances intended to be used in hotels, are within the s

48、cope ofthis standard. As far asis practicable, this standard deals with the common hazardspresented byappliances that are encountered by all persons in and around the home. However, in general,it does not take into accountNOTE 101 Attention is drawn to the fact that for appliances intended to be use

49、d in vehicles or onboard ships or in aircraft, additional requirements may benecessary; in many countries additional requirements are specified by the national health authorities, the nationalauthorities responsible for the protection of labour, the national water s upply authorities and similar authorities.NOTE 102 This standard does not apply to appliances for medical purposes (IEC 60601); intended for immersion in water during use.2 Normative referencesThis clauseof Part 1 is applicable except