EN 50290-2-28-2002 en Communication Cables Part 2-28 Common Design Rules and Construction - Filling Compounds for Filled Cables《通信电缆 第2-28部分 通用设计规则和结构 填充电缆用的填充化合物 替代HD 624 8 S1-199.pdf

《EN 50290-2-28-2002 en Communication Cables Part 2-28 Common Design Rules and Construction - Filling Compounds for Filled Cables《通信电缆 第2-28部分 通用设计规则和结构 填充电缆用的填充化合物 替代HD 624 8 S1-199.pdf》由会员分享，可在线阅读，更多相关《EN 50290-2-28-2002 en Communication Cables Part 2-28 Common Design Rules and Construction - Filling Compounds for Filled Cables《通信电缆 第2-28部分 通用设计规则和结构 填充电缆用的填充化合物 替代HD 624 8 S1-199.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD C ornrnunication cables Part 2-28: Common design rules and construction - Filling compounds for filled cables The European Standard EN 50290-2-28:2002 has the status of a British Standard ICs 33.120.10 BS EN 50290-2-28: 2002 Wk present to the responsible European committee any enqui

2、ries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cr oss-r e fer enc e

3、 s The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogu

4、e. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document compris

5、es a front cover, an inside front cover, the EN title page, pages 2 to 4, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 15 April 2002 ISBN O 580 39478 6 EUROPEAN STANDARD EN 50290-2-28 NORME EUROPENNE EUROP

6、ISCHE NORM January 2002 ICs 33.120.10 Supersedes HD 624.8 S1:1995 +Al:1996 English version Com m u n ication cables Part 2-28: Common design rules and construction - Filling compounds for filled cables Cbles de communication Partie 2-28: Rgles de conception communes et construction - Matires de remp

7、lissage pour cbles remplis Kommunikationskabel Teil 2-28: Gemeinsame Regeln fr Entwicklung und Konstruktion - Petrolat-F I I masse fr gef I Ite Ka bel This European Standard was approved by CENELEC on 2001-11-01. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stip

8、ulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standa

9、rd exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the nationa

10、l electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comi

11、t Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35. B - 1050 Brussels O 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50290-2-28:2002 E EN 50

12、290-2-2812002 -2- Foreword This European Standard was prepared by a joint working group of the Technical Committees CENELEC TC 46X, Communication cables, and CENELEC TC 86A, Optical fibres and optical fibre cables. The text of the draft was submitted to the Unique Acceptance Procedure and was approv

13、ed by CENELEC as EN 50290-2-28 on 2001-1 1-01, This European Standard supersedes HD 624.8 S1:1995 + Al:1996. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2002-08-01 - lat

14、est date by which the national standards conflicting with the EN have to be withdrawn (dow) 2004-08-01 This European Standard has been prepared under the European Mandate M/212 given to CENELEC by the European Commission and The European Free Trade Association. -3- EN 50290-2-2812002 1 Scope This Pa

15、rt 2-28 of EN 50290 gives specific requirements for filling compounds for filled cables used in com m unicat ion cables. It is to be read in conjunction with Part 2-20 of EN 50290. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publica

16、tions. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision.

17、 For undated references the latest edition of the publication referred to applies (including amendments). EN 60811-5-1:1999 Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 5: Methods specific to filling compounds - Section 1 : Drop point - Separat

18、ion of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23C - D.C. resistivity at 23 “C and 100 “C (IEC 60811-5-1:1990, mod.) 3 Req u i remen ts In case of specific applications, additional performances could be needed. Relevant test methods

19、 and requirements shall be included in the detail specifications of the cables. EN 50290-2-2812002 -4- Table 1 - Filling compounds for filled cables (Interstitial filling compounds not intended to be used in contact with optical fibre) Characteristics Test method Unit Grades Drop point EN 6081 1-5-1

20、 clause 4 “C 2 50 I 70 70 Separation of oil EN 6081 1-5-1 clause 5 “C h mm - temperature - duration 50 f 2 24 5 50 f 2 24 5 Result to be obtained, Max. Low temperature brittleness ) EN 6081 1-5-1 clause 6 - temperature - duration “C h -10f1 2 F 20 -10f1 2 F 20 Result to be obtained number of cracks,

21、 Max. Total acid number EN 6081 1-5-1 clause 7 Result to be obtained, Max. m g KO H/g 5 Absence of corrosive components EN 6081 1-5-1 clause 8 Vo corrosion Vo corrosion 6 Permittivity 3, - frequency Result to be obtained, Max. EN 6081 1-5-1 clause 9 kHz 1 2,3 1 2,3 7 DC Resistivity 3, EN 6081 1-5-1

22、clause 10 - test voltage V R.m R.m 100/500 1 o8 1011 100/500 Result to be obtained, min. at 100“ C at 23“ C 1 o8 1011 1) 2) 3) The low temperature brittleness test is not required for type 2 compounds having a drop point 80“ C. For filling compounds with improved thixotropic, swelling or electrical

23、properties, higher values are permissible. These requirements are only applicable to interstitial filling compounds used in cables including copper elements. BS EN 50290-2-28: 2002 BSI 389 Chiswick High Road Lon don w4 4AL BSI is the independent national body responsible for preparing British Standa

24、rds. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Re vi si ons British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the con

25、stant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. T

26、el: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addr

27、essed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: orders&-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published

28、 as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which

29、 give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 71 11. Fax: +44 (0)20 8996 7048. Email: infomi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For de

30、tails ofthese and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 700 1. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is availa

31、ble on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, ofthe publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced,

32、 stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise -without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, ofnecessary details such as symbols, and size, type

33、 or grade designations. Ifthese details are to be used for any other purpose than implementation then the prior written permission ofBSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyright&-.