EN 175301-801-2006 en Detail Specification High density rectangular connectors round removable crimp contacts《详细规格 圆形可拆卸式压接触点的高密度矩形连接器》.pdf

《EN 175301-801-2006 en Detail Specification High density rectangular connectors round removable crimp contacts《详细规格 圆形可拆卸式压接触点的高密度矩形连接器》.pdf》由会员分享，可在线阅读，更多相关《EN 175301-801-2006 en Detail Specification High density rectangular connectors round removable crimp contacts《详细规格 圆形可拆卸式压接触点的高密度矩形连接器》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 175301-801:2006Detail Specification: High density rectangular removable crimp contacts The European Standard EN 175301-801: 2006 has the status of a British StandardICS 31.220.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40

2、g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58connectors, round BS EN 175301-801:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007National forewordThis British S

3、tandard was published by BSI. It is the UK implementation of EN 175301-801:2006. It supersedes BS EN 175301-801:2000 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment

4、.A list of organizations represented on EPL/48 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal o

5、bligations.Amendments issued since publicationAmd. No. Date CommentsISBN 978 0 580 49904 3EUROPEAN STANDARD EN 175301-801 NORME EUROPENNE EUROPISCHE NORM November 2006 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee

6、fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 175301-801:2006 E ICS 31.220.10 Supersedes EN 175301-801:1999English version Detail Speci

7、fication: High density rectangular connectors, round removable crimp contacts Spcification particulire: Connecteurs rectangulaires haute densit contacts circulaires dmontables sertir Bauartspezifikation: Hochpolige Rechteck-Steckverbinder mit runden auswechselbaren Crimpkontakten This European Stand

8、ard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerni

9、ng such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its

10、 own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv

11、ia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 175301-801:2006 - 2 - Foreword This European Standard was prepared by the CENELEC BTWG 117-1 “Revision of EN 175310-801 and EN 175301-803“.

12、The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 175301-801 on 2006-10-01. This European Standard supersedes EN 175301-801:1999. The following dates are proposed: latest date by which the EN has to be implemented at national level by publication of an identica

13、l national standard or by endorsement (dop) 2007-10-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-10-01 _ - 3 - EN 175301-801:2006 Contents Page 1 Scope .5 2 Normative references.6 3 Type designation7 4 Common features.8 4.1 Isometric view 8 4

14、.2 Mating information .8 4.3 Survey of styles10 5 Dimensions.12 5.1 General 12 5.2 Connector with male contacts12 5.3 Connector with female contacts.16 5.4 Marking 20 5.5 Contacts .21 5.6 Locking mechanism .21 5.7 Connector housing, metal version .22 5.8 Mounting dimensions .25 6 Gauges.26 6.1 Sizin

15、g gauge and retention force gauge 26 6.2 Locking (latching) mechanism gauges 27 7 Characteristics30 7.1 Climatic category30 7.2 Electrical characteristics 30 7.3 Mechanical characteristics.32 8 Test schedule .33 8.1 General 33 8.2 Test group P (preliminary) .34 8.3 Test groups AP, BP and CP 35 9 Qua

16、lity assessment procedures.38 9.1 Qualification approval testing.38 9.2 Quality Conformance Inspection39 9.3 Delayed delivery, re-inspection41 10 Ordering information.40 Figure 1 Isometric view7 Figure 2 Plug-in direction.7 Figure 3 Perpendicular to plug-in direction8 Figure 4 Inclination 8 Figure 5

17、 Fixed connector Style A .9 Figure 6 Fixed connector Style B .9 Figure 7 Free connector Style C 10 Figure 8 Free connector Style E.10 Figure 9 Connector with male contacts Dimensions 11 Figure 10 Connector insert E 015M 12 Figure 11 Connector insert E 025M 12 Figure 12 Connector insert E 040M 13 Fig

18、ure 13 Connector insert E 064M 14 EN 175301-801:2006 - 4 - Figure 14 Connector with female contacts Dimensions .15 Figure 15 Connector insert E 015 .16 Figure 16 Connector insert E 025 .16 Figure 17 Connector insert E 040F .17 Figure 18 Connector insert E 064F .18 Figure 19 Locking mechanism 15 + PE

19、 and 25 + PE 20 Figure 20 Locking mechanism 40 + PE and 64 + PE 20 Figure 21 Style A Transversal locking levers (S) .21 Figure 22 Style A Longitudinal locking lever (L).21 Figure 23 Style B Transversal locking levers (S) .21 Figure 24 Style B Longitudinal locking lever (L).22 Figure 25 Style C Trans

20、versal locking pins (S) 22 Figure 26 Style C Longitudinal locking pins (L)22 Figure 27 Mounting dimensions 24 Figure 28 Sizing gauge and retention force gauge .25 Figure 29 Locking (latching) mechanism gauge Transversal locking levers (S) (40, 64 + PE contacts) 26 Figure 30 Locking (latching) mechan

21、ism gauge Longitudinal locking lever (L) (15, 25 + PE contacts)27 Figure 31 Locking (latching) mechanism gauge Longitudinal locking lever (L) (40, 64 + PE contacts)28 Figure 32 Derating curves .30 Figure 33 Arrangement for static load, transverse test .31 Table 1 Plug-in direction Dimensions.7 Table

22、 2 Connector with male contacts Dimensions .11 Table 3 Connector with female contacts Dimensions 15 Table 4 Locking mechanism Dimensions.20 Table 5 Connector housing, metal version Dimensions according Figure 21 to 26.23 Table 6 Mounting dimensions .24 Table 7 Sizing gauge and retention force gauge

23、25 Table 8 Locking (latching) mechanism gauge Transversal locking lever (S) (40, 64 + PE contacts)26 Table 9 Locking (latching) mechanism gauge Longitudinal locking lever (L) (15, 25 + PE contacts) 27 Table 10 Locking (latching) mechanism gauge Longitudinal locking lever (L) (40, 64 + PE contacts).2

24、6 Table 11 Climatic category29 Table 12 Clearance and creepage information .29 Table 13 Test group information .32 Table 14 Group P test sequence.33 Table 15 Group AP test sequence 34 Table 16 Group BP test sequence 35 Table 17 Group CP test sequence 36 Table 18 Group DP test sequence (crimped conne

25、ctions only)36 Table 19 Qualification approval group information37 Table 20 Lot-by-lot tests38 Table 21 Periodic tests39 Table 22 Delayed delivery, re-inspection 40 - 5 - EN 175301-801:2006 ELECTRONIC COMPONENTS OF ASSESSED QUALITY DETAIL SPECIFICATION IN ACCORDANCE WITH EN 61076-1:1995 EN 175301-80

26、1:2006See Clause 5 for dimensions 1 Scope Detail specification for high-density rectangular connectors, round removable crimp contacts 15, 25, 40 to 64 contacts + protective earth contacts (PE) Termination: crimp _Performance level: 1 Assessment levels: B and G (*) Climatic category: see 7.1 Electri

27、cal characteristics: see 7.2 Mechanical characteristics: see 7.3 Ordering information: see Clause 10 (*) see Clauses 8 and 9 Information about manufacturers who have components qualified to this detail specification is available in the current CECC 00 200 (Register of Firms, Products and Services Ap

28、proved under the CECC System). EN 175301-801:2006 - 6 - 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (inclu

29、ding any amendments) applies. EN 2591 1992 Aerospace series Elements of electrical and optical connection Test methods General EN 60068-1 1994 Environmental testing Part 1: General and guidance (IEC 60068-1:1988 + corrigendum October 1988 + A1:1992) EN 60352-2 A1 A2 1994 1997 2002 Solderless connect

30、ions Part 2: Solderless crimped connections General requirements, test methods and practical guidance (IEC 60352-2:1990 + A1:1996 + A2:2002) EN 60512 Series Connectors for electronic equipment Tests and measurements (IEC 60512 series) EN 60529 A1 1991 2000 Degrees of protection provided by enclosure

31、s (IP Code) (IEC 60529:1989 + A1:1999) EN 60664-1 2003 Insulation co-ordination for equipment within low-voltage systems Part 1: Principles, requirements and tests (IEC 60664-1:1992 + A1:2000 + A2:2002) EN 61076-1 A1 1995 1996 Connectors with assessed quality, for use in d.c., low-frequency analogue

32、 and in digital high-speed data applications Part 1: Generic specification Capacity approval (IEC 61076-1:1995 + A1:1996) EN 61076-7-100 2006 Connectors for electronic equipment - Product requirements Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting o

33、f an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system (IEC 61076-7-100:2006) EN 61984 2001 Connectors Safety requirements and tests (IEC 61984-1:2001) EN ISO 1043-1 2001 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characte

34、ristics (ISO 1043-1:2001) EN ISO 1043-2 2001 Plastics Symbols and abbreviated terms Part 2: Fillers and reinforcing materials (ISO 1043-2:2000) EN ISO 1302 2002 Geometrical Product Specification (GPS) Indication of surface texture in technical product documentation (ISO 1302:2002) EN ISO 6743-4 2001

35、 Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999) EN ISO 11469 2000 Plastics Generic identification and marking of plastics products (ISO 11469:2000) IEC 60410 1973 Sampling plans and procedures for inspections by attrib

36、utes - 7 - EN 175301-801:2006 3 Type designation Connectors, performance level and assessment level according to this specification shall be designated by the following system: Note “L” stands for letter “N” stands for number Examples: Connector style E, having 15 male contacts with silver alloy con

37、tact finish with crimp terminations. Complete connector without latching system and with assessment level G: EN 175301-801-E015MC-C2W-G. Connector style A, having 25 female contacts with silver alloy contact finish with crimp termination. Complete connector with latching system L and assessment leve

38、l B: EN 175301-801-A025FC-C2L-B. EN 175301-801EN 175301-801:2006 - 8 - 4 Common features 4.1 Isometric view Figure 1 Isometric view 4.2 Mating information 4.2.1 Plug-in direction The specified contact resistance must be maintained on a mated pair, within the limits of the dimensions specified. Speci

39、fied contact resistance must also be met, if the fixed and free connectors could be engaged below dimension M = 19,5 mm resp. 22,3 mm. Figure 2 Plug-in direction Table 1 Plug-in direction Dimensions No. of contacts M mm 15 + PE, 25 + PE 22,3 to 24 40 + PE, 64 + PE 19,5 to 21 - 9 - EN 175301-801:2006

40、 4.2.2 Perpendicular to plug-in direction The design of the connectors is such that a displacement of at least 0,5 mm in transversal and longitudinal direction of the connectors can be accomodated, to achieve necessary alignment of both parts if one part to the connector pairs is float mounted. For

41、fixed mounted connector pairs, the mounting must be kept accordingly in a sufficient small range. Figure 3 Perpendicular to plug-in direction 4.2.3 Inclination The design of the free and fixed connectors is such to allow for a misalignment of 5 in longitudinal axis and 2 in transverse axis. In the m

42、ated position the condition according to 4.2.1 must be met. Figure 4 Inclination EN 175301-801:2006 - 10 - 4.3 Survey of styles Number of contacts: 15 + PE; 25 + PE; 40 + PE; 64 + PE 4.3.1 Fixed connector Style A Bulkhead mounting receptacle 1)Variant M, male contacts (AM) Variant F, female contacts

43、 (AF) 1)Alternatively with cover or hinged cover. Figure 5 Fixed connector Style A Style B Box mounting receptacle 1) 2)Variant M, male contacts (BM) Variant F, female contacts (BF) 1) Alternatively with cover or hinged cover. 2)Cable outlet alternatively. Figure 6 Fixed connector Style B - 11 - EN

44、175301-801:2006 4.3.2 Free connector Style C 1)straight plug Variant M 2)male contacts (CM) Variant F 2)female contacts (CF) 1)Cable outlet alternatively. 2)Outside view of variant M and F are identical. Figure 7 Free connector Style C Style E connector insert Variant M male contacts (EM) Variant F,

45、 female contacts (EF) Figure 8 Free connector Style E EN 175301-801:2006 - 12 - 5 Dimensions 5.1 General Dimensions in mm are original. Drawings are shown in the first angle projection. The shape of the connectors may deviate from those given in the following drawings as long as the specified dimens

46、ions are not influenced. Missing dimensions shall be chosen according to common characteristics and the intended use. 5.2 Connector with male contacts Relevant dimensions shall be suitable for mounting dimensions according to 5.8. Connector insert: Variant M (all styles) 1)Mounting screws undetachab

47、le. Figure 9 Connector with male contacts Dimensions Table 2 Connector with male contacts Dimensions Number of contacts b2max. c2min. e2min. h2max. h3max. h4min. 15 + PE 25 + PE 3,8 16,5 12 19,2 18 15,4 40 + PE 64 + PE 0,9 13,5 15,3 15,6 14,8 12,2 NOTE Dimensions are in mm. - 13 - EN 175301-801:2006

48、 5.2.1 Connector insert E 015M Figure 10 Connector insert E 015M 5.2.2 Connector insert E 025M Figure 11 Connector insert E 025M Fitswith Connector insertE015F FitswithconnectorinsertE025 F EN 175301-801:2006 - 14 - 5.2.3 Connector insert E 040M Figure 12 Connector insert E 040M FitswithconnectorinsertE040 F - 15 - EN 175301-801:2006 5.2.4 Connector insert E 064M Figure 13 Connector insert E 064M Fitswith connectorinsertE064 F EN 175301-801:2006 - 16 - 5.3 Connector with female contacts Relevant dimensions shall be suitable for mounting dimensions according to 5.8 Connec