EN 16392-2-2014 en Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2 Probes《无损测试 超声相位排列设备的特性表述及认证 第2部分 探针》.pdf

《EN 16392-2-2014 en Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2 Probes《无损测试 超声相位排列设备的特性表述及认证 第2部分 探针》.pdf》由会员分享，可在线阅读，更多相关《EN 16392-2-2014 en Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2 Probes《无损测试 超声相位排列设备的特性表述及认证 第2部分 探针》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 16392-2:2014Non-destructive testing Characterisation andverification of ultrasonicphased array equipmentPart 2: ProbesBS EN 16392-2:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16392-2:2014.The UK participation in its prepa

2、ration was entrusted to TechnicalCommittee WEE/46, Non-destructive testing.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapp

3、lication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 77567 3ICS 19.100Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committe

4、e on 30 April 2014.Amendments issued since publicationDate Text affectedBS EN 16392-2:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16392-2 March 2014 ICS 19.100 English Version Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2: Prob

5、es Essais non destructifs - Caractrisation et vrification de lappareillage de contrle par ultrasons en multilments - Partie 2: Traducteurs Zerstrungsfreie Prfung - Charakterisierung und Verifizierung der Ultraschall-Prfausrstung mit phasengesteuerten Arrays - Teil 2: Prfkpfe This European Standard w

6、as approved by CEN on 6 February 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such

7、national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own l

8、anguage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gre

9、ece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG

10、 CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16392-2:2014 EBS EN 16392-2:2014EN 16392-2:2014 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references

11、4 3 Terms and definitions .4 4 General requirements for compliance .4 5 Technical specification for phased array probes .5 6 Test equipment 7 7 Performance tests for phased array probes .7 BS EN 16392-2:2014EN 16392-2:2014 (E) 3 Foreword This document (EN 16392-2:2014) has been prepared by Technical

12、 Committee CEN/TC 138 “Non-destructive testing”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2014 and conflicting national standards shall

13、be withdrawn at the latest by September 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. EN 16392 consists of the following parts

14、, under the general title Non-destructive testing Characterisation and verification of ultrasonic phased array equipment: Part 2: Probes; and prEN ISO 18563 Part 1: Instruments; Part 3: Combined systems. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the f

15、ollowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherland

16、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16392-2:2014EN 16392-2:2014 (E) 4 1 Scope This European Standard covers linear phased array probes used for ultrasonic non-destructive testing in contact technique (with or with

17、out a wedge) or in immersion technique, with centre frequencies in the range 0,5 MHz 10 MHz. This European Standard specifies the characterisation tests that have to be done at the end of the fabrication of a phased array probe. It defines both methodology and acceptance criteria. This document does

18、 not describe methods and acceptance criteria to characterise the performance of an ultrasonic phased array instrument or the performance of a combined system. These are described in prEN ISO 18563-1 and in prEN ISO 18563-3. 2 Normative references The following documents, in whole or in part, are no

19、rmatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 16018, Non-destructive testing - Terminology - Terms use

20、d in ultrasonic testing with phased arrays EN 1330-2, Non-destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods. EN 1330-4, Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing EN ISO 2400, Non-destructive testing - Ultrasonic tes

21、ting - Specification for calibration block No. 1 (ISO 2400:2012) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1330-2, EN 1330-4, EN 16018 and the following apply. 3.1 phased array probe data sheet document describing the general characteristics of

22、the same type of phased array probes 3.2 phased array probe certificate document showing compliance with this European Standard giving the measured values of the required parameters of one specific phased array probe 4 General requirements for compliance An ultrasonic phased array probe complies wit

23、h this document if it satisfies the following conditions: a) the probe shall comply with Clause 7; b) a declaration of conformity is issued: BS EN 16392-2:2014EN 16392-2:2014 (E) 5 1) either based on the results of statistical analysis by a manufacturer operating a certified quality management syste

24、m or by an organisation operating an accredited test laboratory; 2) or based on measurements of every probe. Probe manufacturers shall then provide the measurement results. Manufacturers shall state which method is used. c) the probe body shall show: 1) a unique serial number; 2) the centre frequenc

25、y; 3) the number of elements; 4) the pitch; 5) the position of the first and last element; 6) reference, if applicable. If this information cannot be given on the probe body, then at least a unique serial number and a reference to identify the probe shall be used. d) a technical specification for th

26、e probe is available, which defines the performance criteria in accordance with Clause 5. 5 Technical specification for phased array probes The technical specifications of phased array probes required by this document shall be listed in a data sheet. Table 1 shows the information which shall be supp

27、lied by the manufacturer in the probe data sheet (M = Measurement, OI = Other information). The probe data sheet shall also contain information concerning the ultrasonic phased array instrument used for the test and its settings, the coupling conditions etc. BS EN 16392-2:2014EN 16392-2:2014 (E) 6 T

28、able 1 Technical information to be given in the probe data sheet Information required Information type aComments Probe supplier OI Identification OI Serial number, reference if applicable and other information engraved on the probe Probe type OI Probe dimensions OI Outer dimensions Shape and dimensi

29、ons of the transducer OI Array surface dimensions and geometry, array dicing and position of element number 1 Pitch, space between elements and element dimensions OI Element dimensions (length and width) Type of connector OI Commercial name, size, number of pins etc. Wiring order M Pin assignment of

30、 the connector Cable OI Cable length, outer diameter and material if specific request Dimensions and material of integrated wedge OI Only valid for contact probes with integrated wedge Centre frequency, bandwidth and pulse width M See 7.3 Relative pulse-echo sensitivity M See 7.4. Probe sensitivity

31、M See 7.5 Inter-element cross-talk OI Minimum value of the inter-element cross-talk, see 7.6 Maximum allowable squint angle OI Maximum value of the squint angle, with indication of the plane of reference Environmental conditions OI For example temperature range, humidity, sealing, pressure Equipment

32、 and setting used for characterization tests OI For example test instruments, test blocks, measurement setup Special conditions OI For example for storage, for protection during transportation Physical aspects OI For example casing material, aspect, see 7.2 aInformation to be given for each transduc

33、er except if contrary indications are given in observation. Table 2 Optional technical information to be shown in the probe data sheet Optional information Comments General drawing and tolerances Inter-element cross-talk Measured cross-talk value corresponding to the probe See 7.6 Squint angle Measu

34、red squint angle value, with indication of the plane of reference BS EN 16392-2:2014EN 16392-2:2014 (E) 7 6 Test equipment 6.1 Electronic equipment The measurement equipment used for the tests specified in Clause 7 shall be stated on the probe data sheet, conformity of this equipment must be checked

35、 periodically. Testing shall be carried out with the probe cables and matching devices specified on the probe data sheet. In addition to the ultrasonic phased array instrumentation or laboratory pulser-receiver, the following equipment or its equivalent is essential to test phased array probes in ac

36、cordance with this document: a) an oscilloscope with a minimum bandwidth of 100 MHz; b) a frequency spectrum analyser with a minimum bandwidth of 100 MHz, or an oscilloscope/digitiser performing Fast Fourier Transform (FFT). 6.2 Tests block and other equipment Phased array probes can be used in cont

37、act technique (with or without a wedge) or in immersion technique. Depending on this, the performance tests shall be carried out under corresponding conditions: a) Contact technique with wedge (integrated or not integrated); A block of the same material as the wedge and proper dimensions so that the

38、 total ultrasonic path is the same for each element shall be used; If the wedge can be removed, the test shall preferably be performed without the wedge. b) Contact technique without wedge; A block of the material to be tested shall be used so that the total ultrasonic path is the same for each elem

39、ent. If no material is specified a block of steel grade according to EN ISO 2400 shall be used. c) Immersion technique. Performance tests shall be carried out in immersion fluid using a defined reflector at a specified distance, which has to be reported in the data sheet. If no fluid is specified wa

40、ter shall be used. Details of the test block (geometry, material, reflector type, shape and position, speed of sound) shall be stated in the probe data sheet or probe certificate. 7 Performance tests for phased array probes 7.1 General Measurements shall be performed at the probe connector once the

41、probe is completely assembled. It should be noted that acceptance criteria are only valid under the conditions defined for the considered probe. BS EN 16392-2:2014EN 16392-2:2014 (E) 8 7.2 Physical aspects 7.2.1 Method Visually inspect the outside of the probe for correct identification and assembly

42、 and for physical damage. For contact probes measure the flatness of the contact surface of the probe. 7.2.2 Acceptance criterion For flat faced probes, over the whole probe face the gap shall not be larger than 0,05 mm. 7.3 Frequency, bandwidth and pulse duration 7.3.1 General Measurements shall be

43、 done on each element of the probe. 7.3.2 Method Measurements are performed in transmit-receive mode according to 6.2. The transmitter pulse shall be a negative square pulse, the duration of which is equal to half the period corresponding to the nominal probe frequency. The echo of the reflector sha

44、ll be placed in a time window, the duration of which is at least twice the duration of the echo pulse measured at -20 dB of the signal amplitude. The frequency spectrum shall be determined on the signal in the used time window. The frequencies intersecting the spectrum at -6 dB of the maximum amplit

45、ude of the spectrum shall be determined. From the upper and lower frequencies thus obtained, respectively named, fu, and, fl, the centre frequency ,f0, is calculated as follows: 2lu0fff+= (1) the bandwidth is defined as follows: lufff = (2) And the relative bandwidth is calculated in %, as: ( ) 100

46、/ 0rel= fff (3) 7.3.3 Acceptance criteria Values obtained for the frequency, bandwidth and pulse duration, are the values for each element. The centre frequency shall be within 10 % of the frequency stated in the data sheet. The -6 dB bandwidth shall be equal to or larger than the bandwidth stated i

47、n the data sheet. The pulse duration shall be smaller or equal to the value stated in the data sheet. BS EN 16392-2:2014EN 16392-2:2014 (E) 9 7.4 Relative pulse-echo sensitivity variation 7.4.1 General Measurements shall be done on each element. 7.4.2 Method The measurement is performed under the sa

48、me conditions as those for 7.3. The amplitude in volts Velof the reference echo of each element shall be measured and recorded. The arithmetic mean value Vavof the Velamplitudes shall be calculated and recorded. Relative pulse-echo sensitivity variation Selof each element shall be calculated as foll

49、ows: avelellg20VVS = (4) 7.4.3 Acceptance criterion The relative pulse-echo sensitivity variation Selover all the elements shall be within 3dB. 7.5 Probe sensitivity 7.5.1 General Measurements shall be done to compare probes of the same type. 7.5.2 Method The measurement is performed under conditions as that for 7.3. The reference excitation signal amplitude Vrefis measured with one channel of an instrument considering one element connected. The signal is considered as the reference excitation signal used for all elements. The average ele