EN 16281-2013 en Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods《儿童保护产品 消费者安装防儿童窗户和.pdf

《EN 16281-2013 en Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods《儿童保护产品 消费者安装防儿童窗户和.pdf》由会员分享，可在线阅读，更多相关《EN 16281-2013 en Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods《儿童保护产品 消费者安装防儿童窗户和.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16281:2013Child protective products Consumer fitted child resistantlocking devices for windowsand balcony doors Safetyrequirements and test methodsBS EN 16281:2013 BRITISH

2、STANDARDNational forewordThis British Standard is the UK implementation of EN 16281:2013. The UK participation in its preparation was entrusted to TechnicalCommittee B/538/1, Windows and doors.A list of organizations represented on this committee can beobtained on request to its secretary.This publi

3、cation does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013 ISBN 978 0 580 74966 7 ICS 91.060.50; 97.190 Compliance with a British Standard cannot confer

4、 immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2013. Amendments issued since publicationDate T e x t a f f e c t e dBS EN 16281:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16281 January

5、2013 ICS 91.060.50; 97.190 English Version Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods Articles pour la scurit des enfants - Dispositifs de blocage des fentres et des portes-fentres lpreuve des enfan

6、ts et monter soi-mme - Exigences de scurit et mthodes dessai Kinderschutzprodukte - Vom Verbraucher anzubringende kindersichernde Verschlussvorrichtungen fr Fenster und Balkontren - Sicherheitstechnische Anforderungen und Prfverfahren This European Standard was approved by CEN on 10 November 2012. C

7、EN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on ap

8、plication to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

9、Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, L

10、atvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-

11、1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16281:2013: EBS EN 16281:2013EN 16281:2013 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and Definitions .44 Requirements .54.1 Child prote

12、ctive functions 54.1.1 General 54.1.2 Requirements concerning the child panel test .54.2 Mechanical functions and structural integrity 74.3 Small parts 84.4 Small balls 84.5 Sharp edges .84.6 Purchase information 84.7 User instructions .84.8 Marking of the product 95 Test methods 95.1 General test c

13、onditions .95.2 Test equipment . 105.3 Extent and order of testing 155.4 Test procedures - child protective function . 165.4.1 Test supervision . 165.4.2 Test samples . 165.4.3 Preliminary checking and preparation . 165.4.4 Child test 165.5 Test procedures mechanical tests . 175.5.1 Ageing 175.5.2 T

14、est of durability of opening restriction . 175.5.3 Test of durability of locking mechanism 185.5.4 Mechanical protective function test (opening test) . 185.5.5 Structural integrity test 195.5.6 Percussion test . 195.5.7 Cutting test 195.5.8 Small parts test . 195.5.9 Small balls test 205.5.10 Sharp

15、edges test . 205.6 Test report . 21Annex A (normative) Flowchart of test procedure . 23Bibliography . 24BS EN 16281:2013EN 16281:2013 (E) 3 Foreword This document (EN 16281:2013) has been prepared by Technical Committee CEN/TC 398 “Child protective products”, the secretariat of which is held by ASI.

16、 This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the

17、 elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According t

18、o the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greec

19、e, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16281:2013EN 16281:2013 (E) 4 1 Scope This European Standard specifies requirements and test

20、 methods for locking devices fitted by consumers for restricting the opening of windows and balcony doors by children younger than 51 months and intended to prevent the passage of young children. Devices that only lock the window in its completely closed position are excluded from the scope of this

21、standard. NOTE Child resistant locking devices intended to be installed by professionals are beyond the scope of this standard; for such products refer to EN 13126-5. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensabl

22、e for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-1:2011, Safety of toys Part 1: Mechanical and physical properties EN ISO 4287, Geometrical product specificatio

23、ns (GPS) Surface texture: Profile method Terms, definitions and surface texture parameters (ISO 4287) EN ISO 4892-2, Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps (ISO 4892-2) EN ISO 6508-1, Metallic materials Rockwell hardness test Part 1: Test method (scales A, B

24、, C, D, E, F, G, H, K, N, T) (ISO 6508-1) 3 Terms and Definitions For the purposes of this document, the following terms and definitions apply. 3.1 ball spherical, ovoid, or ellipsoidal object, usually but not always designed or intended to be thrown, hit, kicked, rolled, dropped or bounced Note 1 t

25、o entry: The term ball also includes any multisided object formed by at least 48 connecting planes into a generally spherical, ovoid or ellipsoidal shape. 3.2 burr roughness, caused by not cleanly severing or finishing the material 3.3 child resistant difficult to be operated by children younger tha

26、n 51 months 3.4 cord style locking device locking device made of a slender flexible material such as woven or knitted string, plastic textile tape or wire BS EN 16281:2013EN 16281:2013 (E) 5 3.5 locking device device that limits the opening of a window or balcony door to a predetermined position 3.6

27、 suction cup means of temporarily attaching an object to a smooth surface made of soft, flexible, polymeric material, normally having a circular base which adheres to the surface when pressed against it, and in this way creates a vacuum 4 Requirements 4.1 Child protective functions 4.1.1 General The

28、 release mechanism of the locking device shall be protected against unintentional opening by young children. It shall either: a) require the use of a specifically designed removable device or removable tool (e.g. a key); or b) comply with the child panel test requirements in 4.1.2. The removable dev

29、ice or removable tool shall be removable in the restricted and closed/locked position of the window or balcony door. It is recommended that locking devices be capable of easy operation by adults including people with special needs. 4.1.2 Requirements concerning the child panel test 4.1.2.1 General T

30、he locking device shall comply with either 4.1.2.2 or 4.1.2.3. NOTE The minimum number of children required in the sequential test depends on how many children can open the child resistant mechanism. This number can be as low as 30. 4.1.2.2 Test panel of 200 children If the full test panel of 200 ch

31、ildren is used when testing in accordance with 5.4, the following requirements shall be met: a) at least 85 % of the children in the test panel shall be unable to disengage the locking device within the first 5 min without a demonstration, and b) at least 80 % of the children in the test panel shall

32、 be unable to disengage the locking device within another 5 min after a demonstration has been given to those children unable to disengage the device in the first 5 min. 4.1.2.3 Sequential test less than 200 children If the full test panel is not used when testing in accordance with 5.4, the result

33、is obtained from completing Figure 1 and Figure 2 as follows: a) The result of the test is a failure if the child succeeds in disengaging the locking device. BS EN 16281:2013EN 16281:2013 (E) 6 b) As each result is obtained, it shall be plotted on the appropriate chart by filling in a square as foll

34、ows: 1) Fill in a square immediately to the right of the previous result on Figure 1 if the child failed to disengage the locking device in the first 5 min, and on Figure 2 if the child failed to disengage the locking device in the second 5 min, i.e. if the result is a success. 2) Fill in a square i

35、mmediately above the previous result on Figure 1 and Figure 2 if the child succeeded in disengaging the locking device in the first 5 min, or only on Figure 2 if the child succeeded in disengaging the locking device in the second 5 min, i.e. if the result is a failure. NOTE In the case of the first

36、result to be plotted, the blanked out square is regarded as the “previous result”. The locking device shall be deemed to have: passed the test as soon as the trail of filled squares passes below limit line 1 on both Figure 1 and Figure 2; failed the test as soon as the trail of filled squares passes

37、 above limit line 2 on either Figure 1 or Figure 2. If neither occurs, the results shall be assessed in accordance with the requirements laid down in 4.1.2.2. Key 1 number of locking devices not disengaged 4 limit line 2 2 number of locking devices disengaged 5 limit line 1 3 enlargement of chart sc

38、ale Acceptable quality limit (AQL) = 5 %; limiting quality (LQ): 20 %; = = 5 %, where is the producers risk; is the consumers risk. Figure 1 Chart of a sequential child test procedure (before demonstration) for locking devices BS EN 16281:2013EN 16281:2013 (E) 7 Key 1 number of locking devices not d

39、isengaged 3 limit line 2 2 number of locking devices disengaged 4 limit line 1 Acceptable quality limit (AQL) = 5 %; limiting quality (LQ): 20 %; = = 5 %, where is the producers risk; is the consumers risk. NOTE For an enlargement of the chart scale, see Figure 1. Figure 2 Chart of a sequential chil

40、d test procedure (after demonstration) for locking devices 4.1.2.4 Full test If a sequential procedure is not used and the full number of children is tested, the results shall be assessed in accordance with the requirements laid down in 4.1.2.2. 4.1.2.5 Additional information to be recorded Any othe

41、r information deemed to be useful in assessing the interpretation of the result, such as the time required for children to disengage the windows locking device and, where appropriate, to engage it properly, the method used by children to disengage it, etc. shall be recorded. 4.2 Mechanical functions

42、 and structural integrity The locking device should maintain its mechanical properties throughout its expected lifetime taking into account the relevant climate conditions. The manufacturer shall indicate the type(s) of window or balcony doors (e.g. hinged or sliding) including the materials (e.g. a

43、luminium, PVC, wood) for which the locking device is suitable In particular, the manufacturer shall ensure that the fixing (e.g. screws) of the locking device is suitable for the recommended material(s). Suction cups shall not be used for the fixing of the locking device. When tested according to 5.

44、5.2 to 5.5.7 none of the tested items or any part of the items shall be broken or have any visible cracks or permanent deformation or disengage. The devices shall be fully functional during and after the tests. When tested in accordance with 5.5.4, test probe A defined in 5.2.8 shall not be able to

45、pass through the opening between sash and frame. NOTE Ideally, the locking device would automatically re-engage when closing the window after having been completely disengaged. However, at this point in time this is not a requirement. It may become a requirement in future. BS EN 16281:2013EN 16281:2

46、013 (E) 8 4.3 Small parts Any small component, which is removable or becomes detached when tested according to 5.5.8, shall not fit wholly within the small parts cylinder described in 5.2.4. Specifically designed removable devices or removable tools (e.g. keys) are exempt from the requirement. 4.4 S

47、mall balls Any small ball, which is removable or becomes detached when tested according to 5.5.9, shall not entirely pass through the small ball template described in 5.2.6. 4.5 Sharp edges There shall be no accessible edges that present an unreasonable risk of injury. a) Edges of metal or glass are

48、 considered as potentially hazardous sharp edges if they are sharp as determined according to 5.5.10. If the edges fail the test, they shall be assessed to determine whether they present an unreasonable risk of injury, taking into account the foreseeable use of the device. Regardless of the manner i

49、n which the edges are finished, they shall be tested according to 5.5.10. NOTE Edges may be folded, rolled or spiralled in order to make them inaccessible or protected by a coating of plastic or other similar material. b) In overlap joints, the edge of the sheet metal shall conform to item a) when the sheet metal has a thickness of 0,5 mm or less and the clearance to the underlying surface is greater than 0,7 mm. c) Edges of metal includin