EN 15876-2-2011 7500 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2 Abstract test suite《冷热水装置用塑料管道设备 聚丁烯(PB) 第2部分 管道 .pdf

《EN 15876-2-2011 7500 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2 Abstract test suite《冷热水装置用塑料管道设备 聚丁烯(PB) 第2部分 管道 .pdf》由会员分享，可在线阅读，更多相关《EN 15876-2-2011 7500 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2 Abstract test suite《冷热水装置用塑料管道设备 聚丁烯(PB) 第2部分 管道 .pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15876-2:2011Electronic fee collection Evaluation of on-board androadside equipment forconformity to EN 15509Part 2: Abstract test suiteCopyright European Committee for Stan

2、dardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15876-2:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15876-2:2011.The UK participation in its preparation was entru

3、sted to TechnicalCommittee EPL/278, Road transport informatics.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BS

4、I 2011ISBN 978 0 580 69058 7ICS 35.240.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2011.Amendments issued since publicationDate Text affectedCopyright

5、 European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15876-2:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15876-2 March 2011 ICS 35.240.60 English Version Electronic fee coll

6、ection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite Perception de tlpage - Evaluation de conformit de lquipement embarqu et de lquipement au sol lEN 15509 - Partie 2: Suite dessais abstraite Elektronische Gebhrenerhebung - Konformittsprfung

7、 von Fahrzeuggerten und straenseitigen Einrichtungen mit der EN 15509 - Teil 2: Abstrakte Prfreihen This European Standard was approved by CEN on 17 December 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standa

8、rd the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English,

9、 French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulg

10、aria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR

11、 STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15876-2:2011: ECopyright European Committee fo

12、r Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15876-2:2011EN 15876-2:2011 (E) 2 Contents Page Foreword 41 Scope 62 Normative references 63 Terms and definitions .64 Abbreviations .95 Abstract Test Meth

13、od (ATM) 105.1 General . 105.2 Test architecture . 106 Untestable Test Purposes (TP) 107 ATS conventions. 117.1 General . 117.2 Naming conventions 117.2.1 Declarations part. 117.2.2 Constraints part 137.2.3 Dynamic part . 137.3 Implementation conventions . 147.3.1 Declaration part . 147.3.2 Constrai

14、nt part 147.3.3 Dynamic part . 14Annex A (normative) Abstract Test Suite (ATS) for On Board Units 15A.1 Introduction . 15A.2 The TTCN Graphical form (TTCN.GR) . 15A.3 The TTCN Machine Processable form (TTCN.MP) . 15Annex B (normative) Abstract Test Suite (ATS) for Roadside Equipment . 16B.1 Introduc

15、tion . 16B.2 The TTCN Graphical form (TTCN.GR) . 16B.3 The TTCN Machine Processable form (TTCN.MP) . 16Annex C (normative) Partial PIXIT Proforma for On Board Units . 17C.1 Introduction . 17C.2 Identification summary 17C.3 ATS summary 17C.4 Test laboratory 18C.5 Client identification. 18C.6 DUT . 18

16、C.7 Protocol layer information . 19C.7.1 Protocol identification 19C.7.2 DUT information 19Annex D (normative) Partial PIXIT Proforma for Roadside Equipment 20D.1 Introduction . 20D.2 Identification summary 20D.3 ATS summary 20D.4 Test laboratory 21D.5 Client identification. 21D.6 DUT . 21D.7 Protoc

17、ol layer information . 22D.7.1 Protocol identification 22Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15876-2:2011EN 15876-2:2011 (E) 3 D.7.2 DUT information 22Bibliogra

18、phy 23Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15876-2:2011EN 15876-2:2011 (E) 4 Foreword This document (EN 15876-2:2011) has been prepared by Technical Committee CE

19、N/TC 278 “Road transport and traffic telematics”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall

20、be withdrawn at the latest by September 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. CEN/TC 278 (WG 1) has produced a set of

21、standards that support interoperable DSRC-EFC-systems (e.g. EN ISO 14906), a “toolbox” for defining EFC-application transaction, and CEN ISO/TS 14907-2 (EFC application interface conformance tests for On Board Units). However, these standards are only of an enabling nature and do not guarantee unamb

22、iguous technical interoperability. Therefore the standard profile Electronic fee collection Interoperable application profile for DSRC (EN 15509) was developed to support technical interoperability between EFC-systems. To evaluate the conformity of On-Board and Roadside Equipment to EN 15509 a two-p

23、art standard has been prepared: Electronic fee collection Evaluation of on-board and roadside equipment for conformity to EN 15509: Part 1: Test suite structure and test purposes Part 2: Abstract test suite Part 1 of the standard defines the test suite structure and the test purposes for conformity

24、evaluation of OBUs and RSE designed for compliance with the requirements set up in EN 15509. A test standard for evaluation of conformity of on-board and roadside equipment is a necessary element for coherent, practical and effective appraisal of products compliance to EN 15509. Part 2 of the standa

25、rd (this standard) provides the Abstract Test Suites (ATS), which are translations of the “human-readable“ TSS operators can easily assess conformity to EN 15509 and reference to the standard in tendering processes; authorities and joint undertakings may reference to the test standard when stating i

26、nteroperability requirements; certification organisations are given an effective tool for certification of products. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bul

27、garia, Croatia, Cyprus, Czech Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15876-2:2011EN 15876-2:2011 (E) 5 Republic, Denmark, Estonia, Finland, France, Germany, Greece

28、, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo rep

29、roduction or networking permitted without license from IHS-,-,-BS EN 15876-2:2011EN 15876-2:2011 (E) 6 1 Scope This European Standard specifies the Abstract Test Suites (ATSs) to evaluate the conformity of On Board Equipment (OBE) and Roadside Equipment (RSE) to EN 15509. The objective of the presen

30、t document is to provide a basis for conformance tests for DSRC equipment (on board units and roadside units) to enable interoperability between different equipment supplied by different manufacturers. 2 Normative references Not applicable. 3 Terms and definitions For the purposes of this document,

31、the following terms and definitions apply. 3.1 access credentials data that is transferred to on-board equipment (OBE), in order to establish the claimed identity of a roadside equipment (RSE) application process entity NOTE The access credentials data carries information needed to fulfil access con

32、ditions in order to perform the operation on the addressed element in the OBE. The access credentials can carry passwords as well as cryptographic based information such as authenticators. EN ISO 14906:2004 3.2 action function that an application process resident at the roadside equipment can invoke

33、 in order to make the on-board equipment execute a specific operation during the transaction EN ISO 14906:2004 3.3 attribute application information formed by one or by a sequence of data elements, and is managed by different actions used for implementation of a transaction EN ISO 14906:2004 3.4 aut

34、henticator data appended to, or a cryptographic transformation (see 3.8) of, a data unit that allows a recipient of the data unit to prove the source and/or the integrity of the data unit and protect against forgery EN ISO 14906:2004 3.5 channel information transfer path EN ISO 14906:2004 Copyright

35、European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15876-2:2011EN 15876-2:2011 (E) 7 3.6 component logical and physical entity composing an on-board equipment, supporting a specific fun

36、ctionality EN ISO 14906:2004 3.7 contract expression of an agreement between two or more parties concerning the use of the road infrastructure EN ISO 14906:2004 3.8 cryptography discipline which embodies principles, means, and methods for the transformation of data in order to hide its information c

37、ontent, prevent its undetected modification or/and prevent its unauthorised use EN ISO 14906:2004 3.9 data group collection of closely related EFC data attributes which together describe a distinct part of an EFC transaction EN ISO 14906:2004 3.10 data integrity property that data has not been alter

38、ed or destroyed in an unauthorised manner EN ISO 14906:2004 3.11 element in the context of DSRC, directory containing application information in form of attributes EN ISO 14906:2004 3.12 implementation conformance statement statement made by the supplier of an implementation or system claimed to con

39、form to a given specification, stating which capabilities have been implemented CEN ISO/TS 14907-2:2006 3.13 implementation conformance statement pro forma document, in the form of a questionnaire, which when completed for an implementation or system becomes an implementation conformance statement C

40、EN ISO/TS 14907-2:2006 3.14 implementation extra information for testing statement made by the supplier or an implementer of a IUT which contains or references all of the information (in addition to that given in the implementation conformance statement) related to the IUT and its testing environmen

41、t, which will enable the test laboratory to run an appropriate test suite against the IUT CEN ISO/TS 14907-2:2006 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15876-2:20

42、11EN 15876-2:2011 (E) 8 3.15 implementation extra information for testing pro forma document, in the form of a questionnaire, which when completed for a DUT becomes an implementation extra information for testing CEN/ISO TS 14907-2:2006 3.16 on-board equipment equipment located within the vehicle an

43、d supporting the information exchange with the roadside equipment NOTE It is composed of the on-board unit and other sub-units whose presence have to be considered optional for the execution of a transaction. Adapted from EN ISO 14906:2004 3.17 on-board unit minimum component of an on-board equipmen

44、t, whose functionality always includes at least the support of the DSRC interface EN ISO 14906:2004 3.18 roadside equipment equipment located at a fixed position along the road transport network, for the purpose of communication and data exchanges with the on-board equipment of passing vehicles EN I

45、SO 14906:2004 3.19 service (EFC) road transport related facility provided by a service provider NOTE Normally a type of infrastructure, the use of which is offered to the user for which the User may be requested to pay. Adapted from EN ISO 14906:2004 3.20 service primitive (communication) elementary

46、 communication service provided by the Application layer protocol to the application processes NOTE The invocation of a service primitive by an application process implicitly calls upon and uses services offered by the lower protocol layers. EN ISO 14906:2004 3.21 service provider (EFC) operator tha

47、t accepts the users payment means and in return provides a road-use service to the user EN ISO 14906:2004 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15876-2:2011EN 158

48、76-2:2011 (E) 9 3.22 session exchange of information and interaction occurring at a specific EFC station between the roadside equipment and the user/vehicle EN ISO 14906:2004 3.23 transaction whole of the exchange of information between the roadside equipment and the on-board equipment necessary for the completion of an EFC operation ov