EN 14930-2007 en Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces (Incorp.pdf

《EN 14930-2007 en Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces (Incorp.pdf》由会员分享，可在线阅读，更多相关《EN 14930-2007 en Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces (Incorp.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN Agricultural and forestry machinery and gardening equipment Pedestrian controlled and hand-held machines Determination of accessibility of hot surfacesICS 65.060.01g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g5

2、5g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g5814930:2007+A1:2009National forewordThis British Standard is the UK implementation of EN 14930:2007+A1:2009. It supersedes BS EN 14930:2007 which is withdrawn.The start and finish of text introduced or altered by am

3、endment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee AGE/6, Agricultural tractors and forestry

4、 machinery.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer imm

5、unity from legal obligations.BS EN 14930:2007+A1:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2007 BSI 2010Amendments/corrigenda issued since publicationDate Comments 31 January 2010 Implementation of CEN amendment A1:2009ISB

6、N 978 0 580 62359 2EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14930:2007+A1 March 2009 ICS 65.060.01 Supersedes EN 14930:2007English Version Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot su

7、rfaces Matriels agricoles et forestiers et matriels de jardinage - Machines portables la main et conducteur pied - Dtermination du risque de contact avec les surfaces chaudes Land- und forstwirtschaftliche Maschinen und Gartengerte - Mitgngergefhrte und handgehaltene Maschinen - Bestimmung der Zugng

8、lichkeit von heien Oberflchen This European Standard was approved by CEN on 26 April 2007 and includes Amendment 1 approved by CEN on 29 December 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the statu

9、s of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A

10、version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic

11、, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NOR

12、MALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14930:2007+A1:2009: EEN 14930:2007+A1:2009 (E) 2 Contents Page Foreword 3 Introduct

13、ion .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Principles 5 5 Test equipment 6 5.1 Temperature measuring equipment.6 5.2 Test cone 6 6 Test procedure .6 6.1 Determination of touchable surfaces 6 6.2 Determination of temperature of touchable surfaces 7 6.3 Determination of are

14、a for interrupted surfaces 7 7 Test acceptance .9 Annex A (informative) Flowchart for the determination of inadvertent accessibility of hot surfaces of machinery 10 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by

15、Directive 98/79/EC . 11 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 12 Bibliography . 13 BS EN 14930:2007+A1:2009EN 14930:2007+A1:2009 (E) 3 Foreword This document (EN 14930:2007+A1:2009) has been prepared by Technica

16、l Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflic

17、ting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2008-12-29. This document supersedes EN 14930:2007. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document ha

18、s been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ According to

19、 the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lith

20、uania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 14930:2007+A1:2009EN 14930:2007+A1:2009 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100. Products with built-in

21、engines or other heat-sources often show hot surfaces. If such a surface is touched by the unprotected skin, burning of the skin can occur. To avoid skin burning protective measures should be applied, especially in cases when the user of the product is not aware of the risk of burning. So it is esse

22、ntial to assess the risk of burning when using a product with a built-in heat source and to apply protective measures if necessary. This European Standard provides a test method to identify the touchable hot surfaces. Guidance for human response to contact with hot surfaces is given in EN 13202. C-t

23、ype standard writers should consider making an exception from this test for parts or systems which can not be guarded (e.g. the inside and the end of exhaust pipe outlet). The aim of this European Standard is that it will be referenced in the type C standards. BS EN 14930:2007+A1:2009EN 14930:2007+A

24、1:2009 (E) 5 1 Scope This European Standard specifies a method for combustion engine driven pedestrian controlled and hand-held machines with or without back pack power unit used in agriculture, forestry and gardening to determine those parts of the surfaces identified by the product specific standa

25、rds that are hot surfaces and can be touched unintentionally by an operator during normal operation. This European Standard is only applicable together with product specific standards for the categories of machines specified above. This European Standard does not specify which surfaces shall be asse

26、ssed. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13202:2000, Ergon

27、omics of the thermal environment Temperatures of touchable hot surfaces Guidance for establishing surface temperature limit values in product specific standards with the aid of EN 563 EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, me

28、thodology (ISO 12100-1:2003) 3 Terms and definitions For any machine covered by this European Standard, the terms and definitions of the product specific standard directly applicable to that type of machine, if available, take precedence over the terms and definitions of this European Standard. For

29、the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003, EN 13202:2000 and in product specific standards directly applicable to that type of machine, if available, and the following apply. 3.1 normal operation use of the machine which is reasonably foreseeable, as seen

30、by the manufacturer, and which is consistent with such activities as starting, stopping, fuelling, connecting to (or disconnecting from) a power source and performing its application 4 Principles This European Standard identifies, with the use of a test cone, the touchable hot surfaces. Surfaces whe

31、re the contactable area exceeds 10 cm2and of which the temperature exceeds the acceptable values for inadvertent contact are detected. BS EN 14930:2007+A1:2009EN 14930:2007+A1:2009 (E) 6 5 Test equipment 5.1 Temperature measuring equipment The measurement of the surface temperature shall be carried

32、out by means of an electrical thermometer with a contact sensor made of metal and insignificant heat capacity. The accuracy of the instrument shall be within the range of 2 C. NOTE The data presented in this European Standard have been evaluated using the above mentioned measuring facility and resul

33、ts obtained by other techniques may not be suitable for comparison with the data. 5.2 Test cone The test cone shall have the dimensions as given in Figure 1. Dimensions in millimetres Figure 1 Test cone 6 Test procedure 6.1 Determination of touchable surfaces The surfaces to be checked shall be spec

34、ified by the product specific standards. The test cone according to 5.2 shall be moved in any possible direction towards the hot surfaces specified for testing. Mark the areas touchable with the test cone tip or conical surface. BS EN 14930:2007+A1:2009EN 14930:2007+A1:2009 (E) 7 6.2 Determination o

35、f temperature of touchable surfaces Measure the temperatures of the touchable surfaces identified in 6.1, under the following conditions: the test shall be conducted without the influence of sunlight with an air speed of max. 5 m/s and at 20 C 5 C ambient temperature; the machine shall be stationary

36、 with the tools operating, unloaded and running at maximum operating engine/motor speed. The operating conditions shall be recorded in the test report; the machine shall be operated until temperatures have stabilised for normal operation of the machine before testing; the temperature (T) shall be de

37、termined by correcting the measured temperature (TM) depending on the ambient temperature (TA) at the time of the test as follows: T = TM (TA 20) where TMis the measured temperature in C; TAis the ambient temperature in C; when measuring the surface temperature care shall be taken that good contact

38、is established between the sensor and the surface. The use of appropriate force and the use of a conducting paste may be necessary for this purpose. The area of contact should lie flat on the surface and shall not become canted. The measured value should not be read until temperature equilibrium bet

39、ween the surface and the sensor has been reached. To reach this equilibrium more quickly it may be convenient to heat the contact sensor of the measuring instrument at a different point of the hot surface before carrying out the actual measurement; mark the surfaces with temperatures higher than bur

40、n threshold values for up to 0,5 s contact period as given in Annex A and Annex B of EN 13202:2000. These surfaces are identified as hot surfaces; measure and record the area of the marked surface(s). If the area is interrupted the procedure in 6.3 shall be followed. 6.3 Determination of area for in

41、terrupted surfaces If a marked surface (with area A1) consists of multiple separate surfaces of which the sum of the areas (A2) exceeds 80 % of A1, then A1shall be considered as one uninterrupted area (see Figure 2). Surfaces whose structure does not allow a ball with 2 mm diameter to penetrate more

42、 than 2 mm below highest parts of the structure shall be considered as part of A1(see Figure 2). BS EN 14930:2007+A1:2009EN 14930:2007+A1:2009 (E) 8 Dimensions in millimetres Key A1marked surface A2sum of area 80 % of A1Figure 2 Example of a surface consisting of multiple separate surfaces If a mark

43、ed surface (with area A1) includes holes of which the sum of the areas (A3) is less than 20 % of the area of marked surface (A1) it shall be considered as one uninterrupted area (see Figure 3). Key A1marked surface A3sum of areas of the holes Figure 3 Example of a surface with holes BS EN 14930:2007

44、+A1:2009EN 14930:2007+A1:2009 (E) 9 7 Test acceptance The recorded area of the marked surface(s) shall not be larger than 10 cm2. BS EN 14930:2007+A1:2009EN 14930:2007+A1:2009 (E) 10 Annex A (informative) Flowchart for the determination of inadvertent accessibility of hot surfaces of machinery BS EN

45、 14930:2007+A1:2009EN 14930:2007+A1:2009 (E) 11 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC This European Standard has been prepared under a mandate given to CEN by the European Commission a

46、nd the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Machinery Directive 98/37/EC, amended by Directive 98/79/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been imple

47、mented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with Essential Requirement 1.5.5, first paragraph, of that Directive and associated EFTA regulation

48、s. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. BS EN 14930:2007+A1:2009EN 14930:2007+A1:2009 (E) 12 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive

49、 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the