EN 14798-2005 en Glass packaging Hand-held crown bottle openers Dimensions《玻璃包装 手动冠形开瓶器 尺寸》.pdf

《EN 14798-2005 en Glass packaging Hand-held crown bottle openers Dimensions《玻璃包装 手动冠形开瓶器 尺寸》.pdf》由会员分享，可在线阅读，更多相关《EN 14798-2005 en Glass packaging Hand-held crown bottle openers Dimensions《玻璃包装 手动冠形开瓶器 尺寸》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 14798:2005Glass packaging Hand-held crown bottle openers Dimensions The European Standard EN 14798:2005 has the status of a British StandardICS 55.100; 97.180g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36

2、g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 14798:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 1 March 2006 BSI 1 March 2006ISBN 0 580 47902 1National forewordThis British Standard is the offic

3、ial English language version of EN 14798:2005.The UK participation in its preparation was entrusted to Technical Committee PKW/0, Packaging, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British

4、Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.

5、This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible i

6、nternational/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN tit

7、le page, pages 2 to 9 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14798October 2005ICS 55.100; 97.180English VersionGlass pa

8、ckaging - Hand-held crown bottle openers - DimensionsEmballage en verre - Dcapsuleurs manuels -SpcificationsVerpackungen aus Glas - Manueller Kronenkorkffner -MaeThis European Standard was approved by CEN on 29 August 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations whi

9、ch stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standa

10、rd exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards

11、 bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE F

12、OR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14798:2005: EEN 14798:2005 (E) 2 Contents Page

13、Foreword 3 1 Scope .4 2 Normative references .4 3 Dimensions4 4 Material 6 4.1 Elasticity 6 4.2 Resistance to wear6 5 Use of crown bottle openers7 6 Marking 8 Bibliography.9 EN 14798:2005 (E) 3 Foreword This European Standard (EN 14798:2005) has been prepared by Technical Committee CEN/TC 261 “Packa

14、ging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the latest by April 2006. It

15、is based on CE.T.I.E. (International Technical Centre for Bottling and Packaging) data sheet DT 24 - 04/02. Efficient packaging is of great importance for the distribution and the protection of goods. Insufficient or inappropriate packaging can lead to damage or wastage of the contents of the pack.

16、According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li

17、thuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 14798:2005 (E) 4 1 Scope This European Standard specifies requirements for crown bottle openers designed for 26 mm crown closures, to suit the glass bottle finishe

18、s specified in EN 14634 and EN 14635. It applies to hand-held openers of the aperture type. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the lat

19、est edition of the referenced document (including any amendments) applies. EN ISO 6507-1, Metallic materials Vickers hardness test Part 1: Test method (ISO 6507-1:1997). 3 Dimensions 3.1 For dimensions see figures 1, 2 and 3. 3.2 The dimensions of the opening space (see figure 1) shall conform to fi

20、gure 2. 3.3 The shape of the opener shown in figure 1 is an example only, and is not intended to preclude other designs, however, the dimensions in figure 2 are obligatory. 3.4 The shape of the opener shall allow the skirt of the crown to spread freely when being removed. 3.5 The lever edge shall no

21、t protrude into the opening space (see figure 2). EN 14798:2005 (E) 5 Dimensions in mm Key aDetail of opening space (see figure 2) bsuggested position for warning Figure 1 Recommended dimensions EN 14798:2005 (E) 6 Dimensions in mm Key 1 lever edge a chamfer Figure 2 Dimensions of opening space 4 Ma

22、terial 4.1 Elasticity The opener shall be manufactured from material having a modulus of elasticity which exceeds 200 kN/mm. NOTE Steel is a suitable material in this respect. 4.2 Resistance to wear The areas of the opener which are in direct contact with the closure shall have a minimum hardness va

23、lue of 490 HV 5, determined in accordance with EN ISO 6507-1. NOTE 1 This is equivalent to a hardness value of 1,65 kN/mm. NOTE 2 Other areas of the opener may require the same hardness in order to exhibit sufficient strength. EN 14798:2005 (E) 7 5 Use of crown bottle openers (see figure 3) 5.1 The

24、lever edge shall contact at least two corrugations of the crown closure (see footnote a). 5.2 The point of leverage on the top of the opener shall coincide with the centre of the crown closure when the lever edge is engaged beneath the corrugations of the crown skirt. 5.3 When engaged beneath the co

25、rrugations of the crown skirt, the lever edge shall not come into contact with the bottle. 5.4 Crown bottles openers are not intended for use on twist crowns. A warning marked on the opener shall be supplemented with a symbol as in figure 4. Dimensions in mm Key ato bear on two corrugations of the c

26、rown skirt Figure 3 View of crown closure removal area Figure 4 Recommended symbol EN 14798:2005 (E) 8 6 Marking The following warning shall be permanently marked on the opener: DO NOT USE ON TWIST CROWN CAPS The height of the characters shall be 3 mm minimum. The suggested position for this warning

27、 is shown in figure 1. EN 14798:2005 (E) 9 Bibliography 1 EN 14634, Glass packaging 26 H 180 crown finish Dimensions. 2 EN 14635, Glass packaging 26 H 126 crown finish Dimensions. BS EN 14798:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national bo

28、dy responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest

29、 amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can

30、be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign sta

31、ndards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementatio

32、n of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information

33、services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the pur

34、chase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- informat

35、ion about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extr

36、act may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symb

37、ols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.