EN 14487-1-2005 en Sprayed concrete - Part 1 Definitions specifications and conformity《喷射混凝土 第1部分 定义 规范和一致性》.pdf

《EN 14487-1-2005 en Sprayed concrete - Part 1 Definitions specifications and conformity《喷射混凝土 第1部分 定义 规范和一致性》.pdf》由会员分享，可在线阅读，更多相关《EN 14487-1-2005 en Sprayed concrete - Part 1 Definitions specifications and conformity《喷射混凝土 第1部分 定义 规范和一致性》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 14487-1:2005Sprayed concrete Part 1: Definitions, specifications and conformityThe European Standard EN 14487-1:2005 has the status of a British StandardICS 91.100.30; 01.040.91g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g

2、59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 14487-1:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 9 January 2006 BSI 9 January 2006ISBN 0 580 47426 7National forewordThis Brit

3、ish Standard is the official English language version of EN 14487-1:2005.The UK participation in its preparation was entrusted by Technical Committee B/517, Concrete, to Subcommittee B/517/10, Sprayed concrete, which has the responsibility to: A list of organizations represented on this subcommittee

4、 can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search”

5、 facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obliga

6、tions. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of page

7、sThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 36, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STA

8、NDARDNORME EUROPENNEEUROPISCHE NORMEN 14487-1November 2005ICS 91.100.30; 01.040.91English VersionSprayed concrete - Part 1: Definitions, specifications andconformityBton projet - Partie 1: Dfinitions, spcifications etconformitSpritzbeton - Teil 1: Begriffe, Festlegungen und KonformittThis European S

9、tandard was approved by CEN on 25 May 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning su

10、ch nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language an

11、d notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Neth

12、erlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form

13、 and by any means reservedworldwide for CEN national Members.Ref. No. EN 14487-1:2005: EEN 14487-1:2005 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .7 4 Classification11 5 Requirements for sprayed concrete 14 6 Specification for sprayed co

14、ncrete19 7 Assessment of conformity20 Annex A (informative) Guidelines for definitions, specification and conformity for sprayed concrete.30 Bibligraphy 36 EN 14487-1:2005 (E) 3 Foreword This European Standard (EN 14487-1:2005) has been prepared by Technical Committee CEN/TC 104 “Concrete and relate

15、d products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2005, and conflicting national standards shall be withdrawn at the latest by December

16、 2007. This European Standard has taken EN 206-1 as a basis. Some clauses which apply to sprayed concrete refer to EN 206-1 because of their importance. Other clauses have been modified to meet the specific requirements of sprayed concrete. This European Standard is only operable with product standa

17、rds for constituent materials (i.e. cement, aggregates, additions, admixtures, fibres and mixing water) and related test methods for sprayed concrete which form the package defined below. For this reason, the latest date of withdrawal of national standards (DOW) conflicting with this document is det

18、ermined by TC 104 to be December 2007. EN 197-1, Cement Part 1: Composition, specifications and conformity criteria for common cements EN 450-1, Fly ash for concrete - Part 1: Definition, specifications and conformity criteria EN 12620, Aggregates for concrete EN 1008, Mixing water for concrete Spec

19、ification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete EN 934-2, Admixtures for concrete, mortar and grout Part 2: Concrete admixtures Definitions and requirements, conformity, marking an

20、d labelling EN 934-5, Admixtures for concrete, mortar and grout Part 5: Admixtures for sprayed concrete Definitions, requirements, conformity, marking and labelling EN 934-6, Admixtures for concrete, mortar and grout Part 6: Sampling, conformity control and evaluation of conformity EN 13263-1, Silic

21、a fume for concrete Part 1: Definitions, requirements and conformity criteria. EN 14487-2, Sprayed concrete Part 2: Execution EN 14488 (all parts), Testing sprayed concrete According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to

22、 implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Ki

23、ngdom. EN 14487-1:2005 (E) 4 Introduction This European Standard will be applied in Europe under different climatic and geographical conditions, different levels of protection and under different, well-established, regional traditions and experience. Classes for concrete properties have been introdu

24、ced to cover this situation. Where such general solutions were not possible, the relevant clauses contain permission for the application of EN 206-1 or other standards valid in place. This European Standard incorporates rules for the use of constituent materials that are covered by European Standard

25、s. Other by-products of industrial processes, recycled materials etc. are in current use based on local experience. Until European specifications for these materials are available, this document will not provide rules for their use, but instead refers to the recommendations given in EN 206-1 to appl

26、y national standards or provisions valid in the place of use of the concrete. This European Standard defines tasks for the specifier, producer and user. For example, the specifier is responsible for the specification of concrete, Clauses 5 and 6 and the producer is responsible for conformity and pro

27、duction control, Clause 7. The user is responsible for placing the concrete in the structure. In practice there may be several different parties specifying requirements at various stages of the design and construction process e.g. the client, the designer, the contractor, the concreting sub-contract

28、or. Each is responsible for passing the specified requirements, together with any additional requirements, to the next party in the chain until they reach the producer. In the terms of this document, this final compilation is known as the “specification“. Further explanations and guidance on the app

29、lication of this document are given in Annex A. EN 14487-1:2005 (E) 5 1 Scope This European Standard is applicable to sprayed concrete, to be used for repair and upgrading of structures, for new structures and for strengthening of ground. This European Standard covers: classification related to cons

30、istence of wet mix; environmental exposure classes; young, hardened and fibre reinforced concrete; requirements for constituent materials, for concrete composition and for basic mix, for fresh and hardened concrete and all types of fibre reinforced sprayed concrete; specification for designed and pr

31、escribed mixes; conformity. This European Standard is applicable to wet mix as well as dry mix sprayed concrete. The substrates to which sprayed concrete can be applied include: ground (rock and soil); sprayed concrete; different types of formwork; structural components constituted of concrete, maso

32、nry and steel; drainage materials; insulating materials. Additional or different requirements may be needed for applications not within this document, for instance-refractory uses. 2 Normative references The following referenced documents are indispensable for the application of this document. For d

33、ated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 197-1, Cement Part 1: Composition, specifications and conformity criteria for common cements EN 206-1:2000, Concrete Part 1: Specification, pe

34、rformance, production and conformity EN 933-1, Tests for geometrical properties of aggregates Part 1: Determination of particle size distribution Sieving method EN 934-2, Admixtures for concrete, mortar and grout Part 2: Concrete admixtures Definitions, requirements, conformity, marking and labellin

35、g EN 934-5:2005, Admixtures for concrete, mortar and grout Part 5: Admixtures for sprayed concrete Definitions, requirements, conformity, marking and labelling EN 14487-1:2005 (E) 6 EN 934-6, Admixtures for concrete, mortar and grout Part 6: Sampling, conformity control and evaluation of conformity

36、EN 1008, Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete EN 1504-3, Products and systems for protection and repair of concrete structures Definitions,

37、 requirements, quality control and evaluation of conformity Part 3: Structural and non structural repair EN 1542, Products and systems for the protection and repair of concrete structures Test methods Measurement of bond strength by pull-off EN 12350-2, Testing fresh concrete Part 2: Slump test EN 1

38、2350-3, Testing fresh concrete Part 3: Vebe test EN 12350-5, Testing fresh concrete Part 5: Flow table test EN 12350-6, Testing fresh concrete Part 6: Density EN 12390-5, Testing hardened concrete Part 5: Flexural strength of test specimens EN 12390-7, Testing hardened concrete Part 7: Density of ha

39、rdened concrete EN 12390-8, Testing hardened concrete Part 8: Depth of penetration of water under pressure EN 12504-1, Testing concrete in structures Part 1: Cored specimens - Testing, examining and testing in compression EN 12504-2, Testing concrete in structures Part 2: Non-destructive testing Det

40、ermination of rebound number EN 12620, Aggregates for concrete EN 13412, Products and systems for the protection and repair of concrete structures Test methods Determination of modulus of elasticity in compression prEN 14487-2, Sprayed concrete Part 2: Execution EN 14488-1, Testing sprayed concrete

41、Part 1: Sampling fresh and hardened concrete prEN 14488-2, Testing sprayed concrete Part 2: Compressive strength of young sprayed concrete prEN 14488-3, Testing sprayed concrete Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens EN 14488-4, Testing spra

42、yed concrete Part 4: Bond strength of cores by direct tension prEN 14488-5, Testing sprayed concrete Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens prEN 14488-7, Testing sprayed concrete Part 7: Fibre content of fibre reinforced concrete prEN 14889-1:2004, Fib

43、res for concrete Part 1: Steel fibres Definition, specification and conformity prEN 14889-2:2004, Fibres for concrete Part 2: Polymer fibres Definition, specification and conformity ISO 758, Liquid chemical products for industrial use Determination of density at 20 degrees C ISO 6782, Aggregates for

44、 concrete Determination of bulk density EN 14487-1:2005 (E) 7 ISO 6784, Concrete Determination of static modulus of elasticity in compression 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 Mix component 3.1.1 Admixtures 3.1.1.1 admi

45、xtures for basic mix material added during the mixing process of concrete in a quantity not more than 5 % by mass of the cement content of the concrete, to modify the properties of the mix in the fresh and /or hardened state EN 934-2 3.1.1.2 Admixtures for projection 3.1.1.2.1 sprayed concrete set a

46、ccelerating admixture admixture to develop very early setting and very early hardening of the sprayed concrete differing from set accelerating admixtures as defined and specified in EN 934-2 EN 934-5 3.1.1.2.2 non-alkaline sprayed concrete set accelerating admixture sprayed concrete set accelerating

47、 admixture according to 3.2.2 of EN 934-5:2005 with an alkali content not exceeding 1 % by mass of the admixture EN 934-5 3.1.2 additions finely divided material used in concrete in order to improve certain properties or to achieve special properties EN 206-1 3.1.3 cement a finely ground inorganic m

48、aterial which, when mixed with water, forms a paste that sets and hardens by means of hydration reactions and processes and which, after hardening, retains its strength and stability even under water EN 206-1 3.1.4 aggregate granular material used in construction. Aggregate may be natural, manufactu

49、red or re-cycled EN 12620 3.1.5 Fibres 3.1.5.1 steel fibres steel fibres are straight or deformed pieces of cold-drawn steel wire, straight or deformed cut sheet fibres, melt extracted fibres, shaved cold drawn wire fibres and fibres milled from steel blocks which are suitable to be homogeneously mixed into concrete or mortar prEN 14889-1 EN 14487-1:2005 (E) 8 3.1.5.2 polymer fibres polymer fibres can be straight or deformed pieces of extruded