EN 617-2001 en Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos bunkers bins and hoppers (Incorp.pdf

《EN 617-2001 en Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos bunkers bins and hoppers (Incorp.pdf》由会员分享，可在线阅读，更多相关《EN 617-2001 en Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos bunkers bins and hoppers (Incorp.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 617:2001Continuous handling equipment and systems Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppersICS 53.040.01NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW+A1:2010National forewordThis

2、British Standard is the UK implementation of EN 617:2001+A1:2010. It supersedes BS EN 617:2001, which is withdrawn.The start and finish of text introduced or altered by amendment is in-dicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example

3、, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee MHE/9, Mechanical handling.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include

4、 all the necessary pro-visions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 617:2001+A1:2010This British Standard, having been prepared under the direction of the Engineering Sector Policy and

5、Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 31 August 2001 BSI 2011Amendments/corrigenda issued since publicationDate Comments 31 March 2011 Implementation of CEN Amendment A1:2010.ISBN 978 0 580 70868 8EUROPEAN STANDARD NORME EUROPENNE EUR

6、OPISCHE NORM EN 617:2001+A1 December 2010 ICS 53.040.10 Supersedes EN 617:2001English Version Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers Equipements et systmes de manutention continue

7、 - Prescriptions de scurit et de CEM pour les quipements de stockage des produits en vrac en silos, soutes, rservoirs et trmies Stetigfrderer und Systeme - Sicherheits- und EMV-Anforderungen an Einrichtungen fr die Lagerung von Schttgtern in Silos, Bunkern, Vorratsbehltern und Trichtern This Europea

8、n Standard was approved by CEN on 4 June 2001 and includes Amendment 1 approved by CEN on 9 November 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterati

9、on. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by

10、 translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

11、Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCH

12、ES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 617:2001+A1:2010: EEN 617:2001+A1:2010 (E) 2 Contents page Foreword . 3Introduction . 41 Scope . 52 Nor

13、mative references 63 Terms and definitions 84 Hazards 95 Safety and EMC requirements and/ or measures . 106 Verification of safety and EMC requirements and /or measures . 257 Information for use . 28Annex A (normative) !List of hazards“ . 33Annex B (informative) Further Documents and Remarks 37Annex

14、 C (informative) Safety signs mentioned in 7.2.3 . 38Annex D (informative) Fire or explosion hazard 39Annex ZA (informative) !Coverage of Essential Requirements of EU Directives“ 41Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of the EU Directive

15、2006/42/EC“ 42Bibliography 44BS EN 617:2001+A1:2010EN 617:2001+A1:2010 (E) 3 Foreword This document (EN 617:2001+A1:2010) has been prepared by Technical Committee CEN/TC 148 “Continuous handling equipment and systems - Safety“, the secretariat of which is held by AFNOR. This European Standard shall

16、be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibility that some of the elements of this document may

17、 be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2010-11-09. This document supersedes EN 617:2001. The start and finish of text introduced or altered by amendment i

18、s indicated in the text by tags ! “. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and

19、 ZB, which are integral parts of this standard. !deleted text“ This !standard“ forms part of a series of five !standards“ the titles of which are given below: EN 617, Continuous handling equipment and systems Safety and EMC requirements for the equipment for the storage of bulk materials in silos, b

20、unkers, bins and hoppers !EN 618“, Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors !EN 619“, Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical ha

21、ndling of unit loads EN 620, Continuous handling equipment and systems Safety and EMC requirements for fixed belt con-veyors for bulk material EN 741, Continuous handling equipment and systems Safety requirements for systems and their components for pneumatic handling of bulk materials !deleted text

22、“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irela

23、nd, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 617:2001+A1:2010EN 617:2001+A1:2010 (E) 4 Introduction This European Standard is a type C standard as stated in EN 1070. The machi

24、nery concerned and the extent to which hazards are covered are indicated in the scope of this standard. While producing this standard it was assumed that: only competent persons operate the system; components without specific requirements are: a) designed in accordance with the usual engineering pra

25、ctice and calculation codes, including all failure modes (see also Bibliography and annex B); b) of sound mechanical and electrical construction; c) made of materials with adequate strength and of suitable quality; d) made of materials free of defects. harmful materials, such as asbestos are not use

26、d as part of the machine; components are kept in good repair and working order, so that required characteristics remain despite wear; by design of the load bearing elements, a safe operation of the system is assured for loading ranging from zero to 100 % of the rated possibilities and during the tes

27、ts; to ensure the correct function of the equipment the ambient temperature is maintained between -5 C to + 50 C; negotiation occurred between the manufacturer1)and the user concerning particular conditions for the use and places of use for the machinery related to health and safety; the place of in

28、stallation allows a safe use of the machine. 1) “manufacturer” within the European Union is to be understood as intended in the Machinery Directive. BS EN 617:2001+A1:2010EN 617:2001+A1:2010 (E) 5 1 Scope This European Standard deals with the technical requirements to minimise the hazards listed in

29、clause 4 and annex A. These hazards can arise during the operation and maintenance of equipment to store bulk materials in silos, bunkers, bins and hoppers and their built-in inlet and outlet devices when carried out in accordance with the specifications given by the manufacturer or his authorised r

30、epresentative. This standard deals with safety related technical verification during commissioning. The following parts are dealt with in this standard (see Figure 1): Key A Bulk material to be stored B Storage space limited by the silo structure C Charging D Discharging E Associated and additional

31、equipment (e.g. flow aid devices, instrumentation, local control systems) F Working and traffic area Figure 1 Parts of a storage equipment NOTE Silos are made of different materials e.g. concrete, steel, aluminium, spun rayon, wood. Safety requirements and/or measures in this standard apply to equip

32、ment used in all environments. However, additional risk assessment and safety measures need to be considered in severe conditions, e.g. low or high temperatures out of the range covered by EN 60204-1, corrosive environments, strong magnetic fields, radioactive conditions and bulk materials to be sto

33、red included their flow the nature of which could lead to a dangerous situation. This standard does not cover requirements for: movable, non permanent storage equipment such as road vehicles, rail wagons, containers for bulk materials, ships and barges; blow tanks and pressure vessels as used in pne

34、umatic conveying systems; stockpiles and flat storage; storage equipment for non bulk materials (liquid, gas, slurries, sludge, silage); dismantling and transport of storage equipments; procedure for entering the silo and behaviour of persons inside the silo; BS EN 617:2001+A1:2010EN 617:2001+A1:201

35、0 (E) 6 storage equipments for underground mining; !noise.“ This European Standard deals with the technical requirements for electromagnetic compatibility (EMC). 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, o

36、nly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ EN 131, Ladders Terms, types, functional sizes !deleted text“ EN 294:1992, Safety of machinery Safety distances to prevent danger zones being reached by the upper

37、 limbs EN 349:1993, Safety of machinery Minimum gaps to avoid crushing of the parts of the human body EN 418:1992, Safety of machinery Emergency stop equipment, functional aspects Principles for design EN 547-1:1996, Safety of machinery Human body measurements Part 1: Principles for determining the

38、dimensions required for openings for whole body access into machinery EN 547-3, Safety of machinery Human body measurements Part 3: Anthropometric data !deleted text“ EN 574, Safety of machinery Two- hand control devices Functional aspects Principles for design !EN 618“, Continuous handling equipmen

39、t and systems Safety and EMC requirements for equipment for mechanical handling of bulk material except fixed belt conveyors EN 620, Continuous handling equipment and systems Safety and EMC requirements for fixed belt conveyors for bulk material EN 626-1, Safety of machinery Reduction of risks to he

40、alth from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers EN 741, Continuous handling equipment and systems Safety requirements for systems and their components for pneumatic handling of bulk material EN 795, Protection against falls from a

41、 height Anchor devices Requirements and testing EN 811:1996, Safety of machinery Safety distances to prevent danger zone being reached by the lower limbs EN 842, Safety of machinery Visual danger signals General requirements, design and testing EN 953:1997, Safety of machinery Guards General require

42、ments for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery Safety related parts of control systems Part 1: General principles for design EN 1037:1995, Safety of machinery Prevention of unexpected start- up EN 1088:1995, Safety of machinery Interlocking devic

43、es associated with guards Principles for design and selection BS EN 617:2001+A1:2010EN 617:2001+A1:2010 (E) 7 EN 1127-1, Explosive atmospheres Explosion prevention and protection Part 1: Basic concepts and methodology !EN 12464-1, Light and lighting Lighting of work places Part 1: Indoor work places

44、 EN 12464-2, Light and lighting Lighting of work places Part 2: Outdoor work places“ !EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003)“ !EN ISO 12100-2:2003, Safety of machinery Basic concepts, general pr

45、inciples for design Part 2: Technical principles (ISO 12100-2:2003)“ !EN ISO 13732-1:2008, Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1:2006)“ !EN ISO 14122-1, Safety of machinery Permanent means of acc

46、ess to machinery Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001)“ !EN ISO 14122-2, Safety of machinery Permanent means of access to machinery Part 2: Working platforms and walkways (ISO 14122-2:2001)“ !EN ISO 14122-3, Safety of machinery Permanent means of access to mac

47、hinery Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001)“ !deleted text“ EN 26184-1, Explosion protection systems Part 1: Determination of explosion indices of combustible dust in air (ISO 6184-1: 1985) !deleted text“ EN 60204-1:1997, Safety of machinery Electrical equipment of machines

48、 Part 1: General requirements (IEC 60204-1:1997) prEN 60204-11:1998, Safety of machinery Electrical equipment of machines Part 11: General requirements for voltage above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV EN 60529, Degrees of protection provided by enclosures (IP code) (IEC 60529:1

49、989) !EN 60825-1, Safety of laser products Part 1: Equipment classification and requirements (IEC 60825-1:2007)“ EN 60947-5-1:1997, Low voltage switchgear and controlgear Part 5: Control circuit devices and switching elements Section 1: Electromechanical control circuit devices (IEC 60947-5-1:1997) IEC 60364-7-706, Electrical installations of buildings Part