EN 230-2005 en Automatic burner control systems for oil burners《燃油炉用自动燃烧炉控制系统》.pdf

《EN 230-2005 en Automatic burner control systems for oil burners《燃油炉用自动燃烧炉控制系统》.pdf》由会员分享，可在线阅读，更多相关《EN 230-2005 en Automatic burner control systems for oil burners《燃油炉用自动燃烧炉控制系统》.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 230:2005 Automatic burner control systems for oil burners The European Standard EN 230:2005 has the status of a British Standard ICS 27.060.10 BS EN 230:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2005

2、BSI 30 June 2005 ISBN 0 580 46278 1 National foreword This British Standard is the official English language version of EN 230:2005. It supersedes BS EN 230:1991 which will be withdrawn on 1 February 2008. The UK participation in its preparation was entrusted to Technical Committee RHE/13, Oil burni

3、ng equipment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalog

4、ue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its corre

5、ct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests info

6、rmed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 55 and a back cover. The BSI copyright notice displayed in this document indicates when the docume

7、nt was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN 230 June 2005 ICS 27.060.10 Supersedes EN 230:1990 English version Automatic burner control systems for oil burners Systmes automatiques de commande et de scurit pour brl

8、eurs fioul Feuerungsautomaten fr lbrenner This European Standard was approved by CEN on 14 February 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteratio

9、n. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translatio

10、n under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungar

11、y, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de S

12、tassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 230:2005: EEN 230:2005 (E) 2 Contents Page Foreword 3 Introduction4 1 Scope .5 2 Normative references .5 3 Terms and definitions.6 4 Classification.11

13、 5 Normal conditions for testing and measurement tolerances 13 6 Constructional requirements .13 7 Functional requirements 17 8 Protection against environmental influences.26 9 Protection against internal faults.34 10 Additional requirements for complex electronics 37 11 Marking, installation and op

14、erating instructions (see also Annex C).39 Annex A (normative) Electrical/electronic component fault modes tables 42 Annex B (informative) Functional characteristics of burner control systems, to be given by the appliance standard45 Annex C (normative) Requirements for DC supplied burner controls46

15、Annex D (informative) Functional diagrams of oil burner controls49 Bibliography.55EN 230:2005 (E) 3 Foreword This document (EN 230:2005) has been prepared by Technical Committee CEN/TC 47 “Atomizing oil burners and their components-Function-safety-testing”, the secretariat of which is held by DIN. T

16、his European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2005, and conflicting national standards shall be withdrawn at the latest by June 2008. Attention is drawn to the possibility that some of t

17、he elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 230:1990. According to edition 1990 the following fundamental changes are carried out: protection against envi

18、ronmental influences; additional requirements for complex electronics. the structure and wherever possible the definitions and requirements are taken over from EN 298:2003- 09. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are boun

19、d to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the U

20、nited Kingdom. EN 230:2005 (E) 4 Introduction Whilst this document is written primarily for Automatic Oil Burner Control Systems used on or in appliance for cooking, heating, hot water production, refrigeration, lighting or washing and having, where applicable, a normal water temperature not exceedi

21、ng 105 C, it may be usefully quoted, as a whole or in part, by standards for other equipment. The functional characteristics of the automatic burner control systems, programming units, and their associated flame detector devices, in so far as they are not laid down in this document, are given by the

22、 standards for the appliances for which the automatic burner control systems are intended. This document deals with immunity aspects of Electromagnetic Compatibility (EMC) only. Since automatic burner control systems are intended for use as an integrated or incorporated part of an appliance, further

23、 EMC tests (both immunity and emission) may be required for the intended use. EN 230:2005 (E) 5 1 Scope This document specifies the requirements, operating conditions and test methods for burner control systems for automatic and semi-automatic oil burners with or without fans. It also applies to dua

24、l fuel burners, for use with either oil or gaseous fuels, when operating on oil. This document covers type testing only. This document also applies to automatic burner control systems, programming units or flame detector devices that include additional functions. Automatic burner control systems uti

25、lising thermo-electric flame supervision devices are not covered by this document. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the

26、 referenced document (including any amendments) applies. EN 267:1999, Forced draught oil burners Definitions, requirements, testing, marking EN 60068-2-6:1995, Environmental testing Part 2: Tests Test Fc: Vibration (sinusoidal) (IEC 60068-2 6:1995 + Corrigendum 1995) EN 60127-1:1991, Miniature fuses

27、 Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (IEC 60127-1:1988) EN 60335-1:2002, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2001, modified) EN 60529, Degrees of protection provided by enclosures (IP Code)

28、 (IEC 60529:1989) EN 60730-1:2000, Automatic electrical controls for household and similar use Part 1: General requirements (IEC 60730-1:1999, modified) EN 60730-2-5:2002, Automatic electrical controls for household and similar use Part 2-5: Particular requirements for automatic electrical burner co

29、ntrol systems (IEC 60730-2-5:2000, modified) EN 61000-4-2, Electromagnetic compatibility (EMC) Part 4: Testing and measuring techniques Section 2: Electrostatic discharge immunity test Basic EMC publication (IEC 61000-4-2:1995) EN 61000-4-3, Electromagnetic compatibility (EMC) Part 4-3: Testing and

30、measurement techniques Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2002) EN 61000-4-4, Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 4: Electrical fast transient/burst immunity test (IEC 61000-4-4:1995) EN 61000-4-5, Electrom

31、agnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 5: Surge immunity test (IEC 61000-4-5:1995) EN 61000-4-6, Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 6: Immunity to conducted disturbances, induced by radio-frequency fields (IE

32、C 61000-4-6:1996)EN 230:2005 (E) 6 EN 61000-4-11, Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 11: Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:2004). EN 61558-2-6:1997, Safety of power transformers, power supply un

33、its and similar Part 2-6: Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997) EN 61558-2-17:1997, Safety of power transformers, power supply units and similar Part 2-17: Particular requirements for transformers for switch mode power supplies (IEC 61558-2-17

34、:1997) IEC 60384-14, Fixed capacitors for use in electronic equipment Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains IEC 60384-16, Fixed capacitors for use in electronic equipment Part 16: Sectional specification: Fi

35、xed metallized polypropylene film dielectric d. c. capacitors ISO 7637-1:2002, Road vehicles Electrical disturbances from conduction and coupling Part 1: Definitions and general considerations ISO 7637-2:1990, Road vehicles Electrical disturbance by conduction and coupling Part 2: Electrical transie

36、nt conduction along supply lines only 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 flame detector device device by which the presence of a flame is detected and signalled; it can consist of a flame sensor, an amplifier and a relay for sign

37、al transmission. These parts, with the possible exception of the actual flame sensor, can be assembled in a single housing for use in conjunction with a programming unit EN 298:2003, term 3.1 3.2 flame sensor actual flame-sensing element, the output signal or value of which is used as the input for

38、the flame detector amplifier EN 298:2003, term 3.2 3.3 sensed flame and flame signal 3.3.1 sensed flame physical value monitored by the flame sensor EN 298:2003, term 3.3.1 3.3.2 flame signal signal given by the flame detector device in case of sensed flame EN 298:2003, term 3.3.2EN 230:2005 (E) 7 3

39、.4 flame simulation condition which occurs when the flame signal indicates the presence of a flame when in reality no flame is present EN 298:2003, term 3.4 3.5 programming unit unit which reacts to signals from control and safety devices, gives control commands, controls the start-up sequence, supe

40、rvises the burner operation and causes controlled shut-down, and if necessary safety shut-down and lock-out; the programming unit follows a predetermined sequence of actions and always operates in conjunction with a flame detector device EN 298:2003, term 3.5 3.6 automatic burner control system syst

41、em comprising at least a programming unit and all the elements of a flame detector device; the various functions of an automatic burner control system may be in one or more housings EN 298:2003, term 3.6 3.7 start position stage, where the system is not in lock-out position, has not yet received the

42、 start signal but can proceed with the start-up sequence when required; at this stage, the output terminals for any automatic shut-off valve and ignition device are not energised EN 298:2003, term 3.7 3.8 start signal signal e.g. from a regulating device, which releases the system from its start pos

43、ition and commences the predetermined programme EN 298:2003, term 3.8 3.9 burner ignition systems 3.9.1 automatic electrical ignition system in which the fuel is ignited using only electrical energy 3.9.1.1 ignition by controlled spark system which allows the fuel to be released only when the presen

44、ce of the ignition spark has been proven 3.9.1.2 ignition by non controlled spark system in which the ignition spark is not proven EN 230:2005 (E) 8 3.9.2 automatic ignition with liquid or gaseous fuel system by which the fuel is ignited by a pilot burner using liquid or gaseous fuel; the operation

45、of the pilot burner may be either interrupted or intermittent. Interrupted pilot burners may be operated manually. Intermittent pilot or first stage burners are operated automatically 3.9.2.1 ignition by controlled pilot burner system which release the main fuel when the ignition burner flame is pre

46、sent 3.9.2.2 ignition by non-controlled pilot burner system in which the release of the main fuel is not prevented by the absence of the flame of the pilot burner 3.10 start-up sequence sequence of actions executed by the system which brings the burner from the start position to the running position

47、 EN 298:2003, term 3.22.1 3.11 programme sequence of control operations determined by the programming unit involving switching on, starting up, supervising and switching off the burner (see diagrams in Annex D) 3.12 waiting time for burners without fans, this is the interval between the start signal

48、 being given and the energization of the ignition device. During this time natural ventilation of the combustion chamber and the flue passages may take place 3.13 purge time period during which the combustion chamber is compulsorily ventilated without any fuel being supplied 3.13.1 pre-purge time pe

49、riod preceding the signal to open the fuel valve during which the combustion chamber is compulsorily ventilated 3.13.2 post-purge time period following the signal to close the fuel valve during which the combustion chamber is compulsorily ventilated 3.14 ignition 3.14.1 total ignition time period during which the ignition device is in operation. Pre-ignition, actual ignition and post-ignition times make up the total