EN 2206-2008 en Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa less than or equal to Rm less than or equal to 850 MPa - Bars - De less than or equal to 150 mm《航空航天系列 FE-PL1.pdf

《EN 2206-2008 en Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa less than or equal to Rm less than or equal to 850 MPa - Bars - De less than or equal to 150 mm《航空航天系列 FE-PL1.pdf》由会员分享，可在线阅读，更多相关《EN 2206-2008 en Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa less than or equal to Rm less than or equal to 850 MPa - Bars - De less than or equal to 150 mm《航空航天系列 FE-PL1.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 2206:2008ICS 49.025.10NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Steel FE-PL1502 (25CrMo4) 650 MPa nullRm null 850 MPa Bars De null 150 mmThis British Standardwas published underthe authority of theStandards Policy andStrategy Committ

2、ee on 30September 2009 BSI 2009ISBN 978 0 580 63176 4Amendments/corrigenda issued since publicationDate CommentsBS EN 2206:2008National forewordThis British Standard is the UK implementation of EN 2206:2008.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/61, Metallic

3、materials for aerospace purposes.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standa

4、rd cannot confer immunityfrom legal obligations.BS EN 2206:2008EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2206 November 2008 ICS 49.029.10 English Version Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa Rm 850 MPa - Bars - De 150 mm Srie arospatiale - Acier FE-PL1502 (25CrMo4) - 650

5、 MPa Rm 850 MPa - Barres - De 150 mm Luft- und Raumfahrt - Stahl FE-PL1502 (25CrMo4) - 650 MPa Rm 850 MPa - Stangen - De 150 mm This European Standard was approved by CEN on 16 August 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for g

6、iving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official

7、versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Bel

8、gium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FO

9、R STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2206:2008: EBS EN 2206:2008EN 2206:2008 (E)

10、 2 Foreword This document (EN 2206:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Assoc

11、iations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards sha

12、ll be withdrawn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regul

13、ations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nethe

14、rlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 2206:2008EN 2206:2008 (E) 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series i

15、s described in EN 4258. This standard has been prepared in accordance with EN 4500-5. 1 Scope This standard specifies the requirements relating to: Steel FE-PL1502 (25CrMo4) 650 MPa Rm 850 MPa Bars De 150 mm for aerospace applications. 2 Normative references The following referenced documents are in

16、dispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4258, Aerospace series Metallic materials General organization of standardization Links

17、 between types of EN standards and their use. EN 4500-5, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 5: Specific rules for steels. 1) EN 4700-2, Aerospace series Steel and heat resisting alloys Wrought products Technical specification Part 2: Ba

18、r and section. 1) EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts. 1) Published as an ASD Prestandard at the date of publication of this standard. BS EN 2206:2008EN 2206:2008 (E) 4 1 Material designation Steel FE-PL1502 (25CrMo4) Element C Si

19、 Mn P S Cr Mo Ni Fe min. 0,22 0,10 0,50 0,90 0,15 2 Chemical composition % max. 0,29 0,35 0,80 0,020 0,015 1,20 0,25 0,30 Base 3 Method of melting Air melted 4.1 Form Bars 4.2 Method of production 4.3 Limit dimension(s) mm De 150 5 Technical specification EN 4700-2 Delivery condition Annealed Harden

20、ed and tempered 6.1 Heat treatment 830 C 880 C / OQ or WQ + Temper 580 C 6.2 Delivery condition code A U Use condition Hardened and tempered Hardened and tempered 7 Heat treatment Delivery condition + 830 C 880 C / OQ or WQ + Temper 580 C Delivery condition Characteristics 8.1 Test sample(s) See EN

21、4700-2. 8.2 Test piece(s) See EN 4700-2. 8.3 Heat treatment Annealed Hardened and tempered Reference aSee line 29 D = 16 mm 9 Dimensions concerned mm 150 150 100 De 150 150 10 Thickness of cladding on each face % 11 Direction of test piece L T bL 12 Temperature C Ambient 13 Proof stress Rp0,2MPa* 48

22、0 750 14 Strength RmMPa* 650 Rm 850 900 Rm 1 100 15 Elongation A % 15 11 12 16 T Reduction of area Z % 17 Hardness 212 HB 197 HB 255 269 HB 331 18 Shear strength RcMPa* 19 Bending k 20 Impact strength KV J 70 35 40 21 Temperature C 22 Time h 23 Stress aMPa* 24 Elongation a % 25 Rupture stress RMPa*

23、26 C Elongation at rupture A % 27 Notes (see line 98) a, bBS EN 2206:2008EN 2206:2008 (E) 5 29 Reference heat treatment Hardened and tempered + (870 10) C / OQ + Temper (545 5) C 31 Hardenability (Jominy test) Distance (mm) 1,5 5 9 15 25 40 HRC 44 40 34 27 21 HRC 52 51 48 41 35 31 95 Marking inspect

24、ion See EN 4700-2. 96 Dimensional inspection See EN 4700-2. 98 Notes * 1 MPa = 1 N/mm2. aOptional test. b Transverse direction in lieu of longitudinal direction when agreed between manufacturer and purchaser. 99 Typical use General purpose steel; weldable. BS EN 2206:2008EN 2206:2008 (E) 6 100 Produ

25、ct qualification See EN 9133. Qualifcation programe to be agred betwen manufacturer and purchaser. BS EN 2206:2008This page has been intentionally left blankBS EN2206:2008BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards Inst

26、itutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should

27、make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeerespo

28、nsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BS

29、I, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI

30、policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. V

31、arious BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial disc

32、ounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BS

33、I is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced,

34、stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: