EN 1809-2014 en Diving equipment - Buoyancy compensators - Functional and safety requirements test methods (Incorporates Amendment A1 2016)《潜水装备 浮力补偿器 功能和安全要求 试验方法》.pdf

《EN 1809-2014 en Diving equipment - Buoyancy compensators - Functional and safety requirements test methods (Incorporates Amendment A1 2016)《潜水装备 浮力补偿器 功能和安全要求 试验方法》.pdf》由会员分享，可在线阅读，更多相关《EN 1809-2014 en Diving equipment - Buoyancy compensators - Functional and safety requirements test methods (Incorporates Amendment A1 2016)《潜水装备 浮力补偿器 功能和安全要求 试验方法》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 1809:2014+A1:2016Diving equipment Buoyancycompensators Functionaland safety requirements, testmethodsBS EN 1809:2014+A1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of The UK participation in its preparation was entrusted by Tech

2、nical Committee PH/4, Respiratory protection, to Subcommittee PH/4/7,A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct app

3、lication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 91010 4ICS 97.220.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Com

4、mittee on 31 July 2014.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e d30 April 2016 Implementation of CEN amendment A1:2016Underwater breathing apparatus.withdrawn.EN 1809:2014+A1:2016. It supersedes BS EN 1809:2014 which is The start and finish of text introduced or alter

5、ed by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1809:2014+A1 March 2016 ICS 97.220.40 Supersedes EN 1809:20

6、14English Version Diving equipment - Buoyancy compensators - Functional and safety requirements, test methods Equipement de plonge - Boue dquilibrage - Exigences fonctionnelles et de scurit, mthodes dessai Tauch-Zubehr - Tariermittel - Funktionelle und sicherheitstechnische Anforderungen, Prfverfahr

7、en This European Standard was approved by CEN on 14 May 2014 and includes Amendment 1 approved by CEN on 11 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard witho

8、ut any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other l

9、anguage made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Den

10、mark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE

11、 FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1809:2014+A1:2016 EEN 1809:201

12、4+A1:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Requirements . 6 4.1 General 6 4.2 Mandatory features 6 4.3 Optional features . 8 4.4 Long-term usability 9 4.5 Resistance to hydrostatic pressure 9 5 Test methods 9 5.1 General 9 5.2

13、 Visual inspection 10 5.3 Wearing and environmental resistance tests 10 5.4 Hydrostatic pressure test 10 5.5 Buoyancy test . 11 5.6 Inflator tests . 11 5.7 Deflation device test 11 5.8 Pressure relief test 12 5.9 Drainage test 12 5.10 Test of oral inflation device 12 5.11 Test of auxiliary inflation

14、 devices 12 5.12 Flow capacity of medium pressure hose and connector 12 5.13 Practical performance test . 14 6 Information supplied by the manufacturer 15 6.1 Marking 15 6.2 Instructions for use . 16 Annex A (informative) Artificial sea water composition 17 Annex ZA (informative) Relationship betwee

15、n this European Standard and the Essential Requirements of Directive on personal protective equipment (PPE) 89/686/EEC 18 Bibliography . 19 BS EN 1809:2014+A1:2016EN 1809:2014+A1:2016 (E) 3 European foreword This document (EN 1809:2014+A1:2016) has been prepared by Technical Committee CEN/TC 136 “Sp

16、orts, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2016, and conflicting national

17、 standards shall be withdrawn at the latest by September 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes

18、Amendment 1 approved by CEN on 2016-01-11. This document supersedes !EN 1809:2014“. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade

19、 Association, and supports essential requirements of EU Directive on personal protective equipment (PPE) 89/686/EEC. For relationship with EU Directive on personal protective equipment (PPE) 89/686/EEC, see informative Annex ZA, which is an integral part of this document. In comparison with !deleted

20、 text“ EN 1809:1997, the following significant changes !had“ been made: a) updating of definitions; b) updating of test methods; c) introduction of pass/fail criteria for practical performance test; d) update of marking and instructions for use. According to the CEN-CENELEC Internal Regulations, the

21、 national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia

22、, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1809:2014+A1:2016EN 1809:2014+A1:2016 (E) 4 1 Scope This European Standard specifies functional, safety requirements and test methods a

23、pplicable to inflatable type buoyancy compensating devices intended to provide divers with means for controlling buoyancy and if applicable, means for carrying the breathing equipment and/or carrying the weights. This European Standard is not applicable to other kinds of personal equipment such as l

24、ife preservers, personal flotation or rescue devices including combined buoyancy and rescue devices. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cite

25、d applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 250, Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking 3 Terms and definitions For the purposes of this docume

26、nt, the following terms and definitions apply. 3.1 buoyancy compensator BC inflatable type device that provides the diver with a means for controlling buoyancy 3.2 buoyancy upward force exerted upon the immersed volume of a body 3.3 maximum buoyancy maximum upward force of a fully inflated BC 3.4 br

27、eathing apparatus system for providing the user with breathable gas Note 1 to entry: The breathing apparatus may be, e.g. open circuit according to EN 250, re-breathers according to EN 14143 or umbilical supplied according to EN 15333-1 and EN 15333-2. 3.5 oral inflation device device that permits i

28、nflation of the BC by mouth 3.6 compressed gas inflation device device to inflate the BC with breathable gas mixture from the breathing apparatus or an independent source BS EN 1809:2014+A1:2016EN 1809:2014+A1:2016 (E) 5 3.7 deflation device device that permits deflation of the BC Note 1 to entry: T

29、his device may be either manually or automatically operated. 3.8 pressure relief device device that automatically prevents over pressurisation of the BC 3.9 harness means by which the BC is secured to the users body 3.10 carrying system carrying frame or holding device for breathing equipment with t

30、he possibility to mount the harness (if applicable) 3.11 auxiliary inflation device inflation device that is actuated to effect a rapid increase in buoyancy independent of the supply of breathable gas mixture from the breathing apparatus 3.12 cylinder container for breathable gas mixture under high

31、pressure 3.13 breathable mixture breathing gas capable of supporting human life under appropriate diving conditions 3.14 rated pressure maximum rated pressure as indicated in the instructions for use of the BC as maximum working pressure for the inflation device 3.15 medium pressure pressure between

32、 the pressure reducer and the demand valve 3.16 bladder bag or bags containing the gas providing the buoyancy BS EN 1809:2014+A1:2016EN 1809:2014+A1:2016 (E) 6 4 Requirements 4.1 General The BC shall not give evidence of any risk of injury of the diver, nor shall impair the operability of any of its

33、 components or that of a breathing apparatus. The BC shall be equipped with several devices permitting respectively oral and compressed gas inflation, manual deflation, automatic pressure relief, drainage of entrapped water, and with a harness for securing it to the users body. Testing is in accorda

34、nce with 5.2 and 5.13. If the BC has more than one bladder, then each bladder, together with the associated inflation and deflation device, shall comply with the requirements of this standard. 4.2 Mandatory features 4.2.1 Oral inflation device Parts of the device that come into contact with the user

35、s mouth shall be free of sharp edges and corners. When tested in accordance with 5.13, the oral inflation device shall be assessed as readily accessible to the mouth and either hand in any stage of inflation of the BC. It shall be operable even when wearing protective gloves (three fingers, (6 1) mm

36、, double-lined). The oral inflation device shall allow the BC to be easily inflated by mouth when tested in accordance with 5.13. The oral inflation device shall withstand a pulling force of 150 N for (10 1) s without damage and remain functional. Testing is in accordance with 5.10. 4.2.2 Compressed

37、 gas inflation device This comprises a medium pressure hose and a valve that shall be actuated subsequent to one positive, manual operation such as pressing a button, or by an automatic control system. Gas supply shall be capable of simple isolation or able to be disconnected between the hose and th

38、e inflation device by a quick connect coupling. If a quick connection coupling is fitted, the preferred configuration for the male part of the inflation device is as shown in Figure 1, where only the relevant dimensions are specified. If the configuration of the connection used is different from the

39、 preferred one, it shall not be possible to connect the female connection to the preferred male connector. It shall be possible to isolate or disconnect the gas supply with either hand when wearing protective gloves (three fingers, 6 mm 1 mm, double-lined). Testing is in accordance with 5.13. BS EN

40、1809:2014+A1:2016EN 1809:2014+A1:2016 (E) 7 Dimensions in millimetres ! “ Figure 1 Quick release male connector The inflation device shall remain functional with a medium pressure twice its rated working pressure or at least (20 1) bar. The inflation device shall withstand a medium pressure of at le

41、ast 30 bar for 60 s. Testing is in accordance with 5.6.2. The medium pressure hoses assembly shall comply with the appropriate requirements of EN 250. If the medium pressure hose is provided with a quick connect coupling, the hose connected to the male part of the quick connect coupling shall have a

42、 minimum air flow of 250 l/min STPD, when connected to a constant 10 bar supply. Testing is in accordance with 5.12. The maximum buoyancy, determined in accordance with 5.5, shall be built up at a rate greater than 15 N/s at a minimum medium pressure according to manufacturers instructions and in no

43、 case higher than 6 bar. Testing is in accordance with 5.6.1. 4.2.3 Deflation device 4.2.3.1 The BC shall have at least one manually operated deflation device. Testing is in accordance with 5.13. 4.2.3.2 If deflation devices are manually operated, they shall be activated by one positive manual opera

44、tion, such as pressing a button or pulling a cord. They shall be operable even when wearing protective gloves (three fingers, (6 1) mm, double-lined). At least one device shall be readily accessible at any stage of operation of the BC. Testing is in accordance with 5.13. 4.2.3.3 The flow capacity of

45、 at least one deflation device shall be greater than the maximum flow that may be achieved by any individual inflation device. BS EN 1809:2014+A1:2016EN 1809:2014+A1:2016 (E) 8 Testing is in accordance with 5.7.1. 4.2.3.4 The deflation device shall allow a loss of buoyancy, at a rate greater than 20

46、 N/s. Testing is in accordance with 5.7.2. 4.2.3.5 If the manual deflation device is operated by means of a pulling system, it shall withstand a tensile force of 150 N for 10 s and remain functional when tested in accordance with 5.7.3. 4.2.4 Pressure relief device The pressure relief device shall p

47、revent damage to the BC through over-pressurization. When tested in accordance with 5.8, the pressure inside the BC shall not exceed 50 % of its burst pressure. The BC shall have a minimum burst pressure of 0,5 bar above atmospheric pressure. 4.2.5 Means for drainage of entrapped water When tested i

48、n accordance with 5.9, the weight of entrapped water shall be less than 2 % of the maximum buoyancy of the BC and in any case not more than 0,8 kg. 4.2.6 Harness This feature, which incorporates strapping or other means of attachment, shall perform its function of securing the BC to the body taking

49、into account different body sizes. The means of attachment shall not interfere with the removal of the users ballast weights when the BC is donned in accordance with the manufacturers instructions. Testing is in accordance with 5.13. 4.3 Optional features 4.3.1 Influence on mandatory features If the BC is equipped with optional features, these shall be assessed as not compromising the effectiveness of the mandatory features during the practical performance test in accordance with 5.13. 4.3.2 Carrying system If a breathing apparatus is attached to th