EN 13732-2013 en Food processing machinery - Bulk milk coolers on farms - Requirements for performance safety and hygiene《食品加工机械 农场散装奶冷却器 性能 安全和卫生要求》.pdf

《EN 13732-2013 en Food processing machinery - Bulk milk coolers on farms - Requirements for performance safety and hygiene《食品加工机械 农场散装奶冷却器 性能 安全和卫生要求》.pdf》由会员分享，可在线阅读，更多相关《EN 13732-2013 en Food processing machinery - Bulk milk coolers on farms - Requirements for performance safety and hygiene《食品加工机械 农场散装奶冷却器 性能 安全和卫生要求》.pdf（76页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 13732:2013Food processing machinery Bulk milk coolers on farms Requirements for performance,safety and hygieneBS EN 13732:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13732:2013. Itsupersedes BS EN 13732:2002+A2:2009 which

2、is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee MCE/3/5, Food industry machines.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a cont

3、ract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 76407 3ICS 65.040.10; 67.260Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under t

4、he authority of theStandards Policy and Strategy Committee on 31 August 2013.Amendments issued since publicationDate Text affectedBS EN 13732:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13732 July 2013 ICS 65.040.10; 67.260 Supersedes EN 13732:2002+A2:2009English Version Food processing

5、 machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene Machines pour les produits alimentaires - Refroidisseurs de lait en vrac la ferme - Prescriptions pour les performances, la scurit et lhygine Nahrungsmittelmaschinen - Behltermilchkhlanlagen fr Milcherzeugerbe

6、triebe - Anforderungen an Leistung, Sicherheit und Hygiene This European Standard was approved by CEN on 7 June 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without a

7、ny alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other langu

8、age made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark

9、, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FO

10、R STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13732:2013: EBS EN 13732:2013EN 13732:2013 (E

11、) 2 Contents Page Foreword . 4 Introduction 5 1 Scope 6 2 Normative references . 7 3 Terms and definitions 8 4 List of significant hazards . 12 5 Safety requirements and/or protective measures Performance 13 5.1 General . 13 5.2 Mechanical hazards . 13 5.3 Electrical hazards . 14 5.4 Thermal hazards

12、 and hazards generated by materials and substances used 14 5.5 Hygiene . 14 5.6 Ergonomics 19 5.7 Provisions for maintenance . 20 5.8 Other general requirements for tanks . 20 5.9 Additional requirements for special tanks - Ice bank tanks . 22 6 Verification and tests . 23 7 Information for use . 26

13、 7.1 General . 26 7.2 Warning signs 26 7.3 Instruction handbook for the user . 27 7.4 Instructions check list 28 7.5 Installation and maintenance instructions 29 7.6 Dismantling instructions 30 7.7 Minimum marking. 30 Annex A (normative) Noise test code (Grade 2 of accuracy) 32 A.1 General . 32 A.2

14、Emission sound pressure level determination . 32 A.3 Mounting conditions 32 A.4 Operating conditions . 33 A.5 Measurement uncertainties . 33 A.6 Information to be recorded 33 A.7 Information to be reported . 34 A.8 Declaration and verification of the noise emission values 34 Annex B (normative) Elec

15、trical requirements for bulk milk coolers according to EN 60204-1:2006 . 36 B.1 Safety requirements related to electromagnetic phenomena 36 B.2 Protection against electric shock 36 B.3 Ambient air temperature 36 B.4 Supply disconnecting device 36 B.5 Power circuits 36 B.6 Overload protection of moto

16、rs 36 B.7 Control circuit supply 37 B.8 Emergency stop devices 37 B.9 Degrees of protection 37 B.10 Markings of control equipment . 37 BS EN 13732:2013EN 13732:2013 (E) 3 Annex C (normative) Electrical requirements for bulk milk coolers according to EN 60335-1:2002 . 38 C.1 General . 38 C.2 Normal o

17、peration 38 C.3 General conditions for the tests 38 C.4 Classification 38 C.5 Input and current 38 C.6 Heating 39 C.7 Leakage current and electric strength at operating temperature. 39 C.8 Moisture resistance 40 C.9 Abnormal operation . 40 C.10 Stability and mechanical hazards 42 C.11 Mechanical str

18、ength . 42 C.12 Supply connection and external flexible cords 42 C.13 Provision for earthing 43 C.14 Creepage distances, clearances and solid insulation 43 C.15 Resistance to heat and fire 43 Annex D (normative) Test for cooling, thermal insulation, mixing tests 44 D.1 General . 44 D.2 Performance t

19、ests 45 Annex E (normative) Test for cleanability and cleaning performance 57 E.1 Introduction 57 E.2 Definitions and steps for the test 57 E.3 Installation of the tank to be tested . 58 E.4 Preparation of soiling milk (solution A) 58 E.5 Soiling of the tank 59 E.6 Automatic cleaning of the tank 59

20、E.7 Tank rest phase 60 E.8 Visual assessment of internal tank surfaces and equipment 60 E.9 Taking method for bacteriological examinations . 60 E.10 Visual assessment of internal tank surfaces and equipment 62 E.11 Bacteriological examination 62 E.12 Chemical examination 63 E.13 Interpretation of re

21、sults . 64 Annex F (normative) Sampling methods for milk mixing tests . 65 Annex G (normative) Equipment and installation for the tests for cleanability and cleaning performance required in Annex E . 66 G.1 Equipment and installation for the examination dealing with the tank outlet . 66 G.2 Equipmen

22、t and installation for the examination dealing with the internal tank surfaces and equipment . 67 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/CE 71 Bibliography 72 BS EN 13732:2013EN 13732:2013 (E) 4 Foreword This document

23、 (EN 13732:2013) has been prepared by Technical Committee CEN/TC 153 “Machinery intended for use with foodstuffs and feed”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement,

24、at the latest by January 2014, and conflicting national standards shall be withdrawn at the latest by January 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying a

25、ny or all such patent rights. This document supersedes EN 13732:2002+A2:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s)

26、, see informative Annex ZA, which is an integral part of this document. The main changes compared to the previous edition are the following ones: a) specification of the scope: 1) pre-cooled milk is taken into account; 2) other energy than electrical energy as well as the pressure aspect of vacuum t

27、anks are excluded; b) updating of normative references; c) specification of the electrical requirements (5.3 was revised and Annexes B and C were added); d) addition of subclause 7.2 “Warning signs”; e) specification of the noise test code; f) editorial modifications. According to the CEN-CENELEC In

28、ternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,

29、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13732:2013EN 13732:2013 (E) 5 Introduction This document is a type C standard as stated in EN ISO 12100. The mac

30、hinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedenc

31、e over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. BS EN 13732:2013EN 13732:2013 (E) 6 1 Scope 1.1 This European Standard specifies requirements for design, performance, safety and hygiene of refrigerated

32、bulk milk coolers and the related methods of test. This standard deals with all significant hazards, hazardous situations and events relevant to bulk milk coolers on farms, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Cla

33、use 4). It applies to refrigerated bulk milk tanks with air cooled condensing units and automatic control intended for installation on farms or at milk collecting points. It applies to tanks for two milkings (24 h), four milkings (48 h) and six milkings (72 h), in which the cooling takes place total

34、ly (non-pre-cooled milk) or partially (in case of pre-cooled milk) within the tank. Performance requirements in 5.5.1.2.1 and 5.5.1.2.2 do not apply to tanks in combination with instant cooling or in association with a continuous system of milking (e.g. milking with robot). 1.2 This European Standar

35、d does not cover: mobile tanks; tanks intended to be tilted for drainage; equipment for delivering the milk to the tank; equipment for pre-cooling or instant cooling of the milk; the hazards due to the use of other energy than electrical energy; pression aspect of vacuum tanks. 1.3 Noise is not cons

36、idered to be a significant hazard, but a relevant one for bulk milk coolers. This standard therefore includes information in 7.1 and in Annex A concerning the manufacturers declaration of the noise emission level of the cooler. 1.4 This standard does not cover the calibration requirements for the ta

37、nk to be used as a system for payment purpose. 1.5 This standard is not applicable to bulk milk coolers on farms which are manufactured before the date of its publication as an EN. BS EN 13732:2013EN 13732:2013 (E) 7 2 Normative references The following documents, in whole or in part, are normativel

38、y referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 378-1:2008+A2:2012, Refrigerating systems and heat pumps Safety

39、and environmental requirements Part 1: Basic requirements, definitions, classification and selection criteria EN 378-2, Refrigerating systems and heat pumps Safety and environmental requirements Part 2: Design, construction, testing, marking and documentation EN 378-3, Refrigerating systems and heat

40、 pumps Safety and environmental requirements Part 3: Installation site and personal protection EN 378-4, Refrigerating systems and heat pumps Safety and environmental requirements Part 4: Operation, maintenance, repair and recovery EN 1005-3, Safety of machinery Human physical performance Part 3: Re

41、commended force limits for machinery operation EN 1088, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 1672-2:2005+A1:2009, Food processing machinery Basic concepts Part 2: Hygiene requirements EN 10088-2:2005, Stainless steels - Part 2: Techni

42、cal delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 60335-1:2002, Household and similar electrical appliances Safety Par

43、t 1: General requirements (IEC 60335-1:2001, modified) EN 60335-2-34, Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors (IEC 60335-2-34) EN 60529:1991,1)Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN 61310-1, Safet

44、y of machinery Indication, marking and actuation Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1) EN ISO 1211, Milk Determination of fat content Gravimetric method (Reference method) (ISO 1211) EN ISO 3744, Acoustics Determination of sound power levels and sound energy lev

45、els of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane (ISO 3744) EN ISO 4288, Geometrical product specifications (GPS) Surface texture: Profile method Rules and procedures for the assessment of surface texture (ISO 4288) EN ISO 4871, Acou

46、stics Declaration and verification of noise emission values of machinery and equipment (ISO 4871) 1) EN 60529:1991 is impacted by EN 60529:1991/A1:2000, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1991/A1:2000). BS EN 13732:2013EN 13732:2013 (E) 8 EN ISO 11201:2010, Acoustics N

47、oise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) EN ISO 11202:2010, Acoustics Noise emitted by mac

48、hinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) EN ISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reduction (ISO 12100:2

49、010) EN ISO 13732-1:2008, Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1:2006) EN ISO 13849-1, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1) EN ISO 14122-2, Safety of machinery Permanent means of access to machinery Part 2: Working platforms and walkways (ISO 14122-2) EN ISO 14122-3, Safety of machinery Permanent me