EN 13408-2002 en Methods of Test for Hydraulic Setting Floor Smoothing and or Levelling Compounds - Determination of Bond Strength《水压调整地面平滑和 或调平用复合物的试验法 粘合强度测定》.pdf

《EN 13408-2002 en Methods of Test for Hydraulic Setting Floor Smoothing and or Levelling Compounds - Determination of Bond Strength《水压调整地面平滑和 或调平用复合物的试验法 粘合强度测定》.pdf》由会员分享，可在线阅读，更多相关《EN 13408-2002 en Methods of Test for Hydraulic Setting Floor Smoothing and or Levelling Compounds - Determination of Bond Strength《水压调整地面平滑和 或调平用复合物的试验法 粘合强度测定》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD Methods of test for hydraulic setting floor smoothing and/or levelling compounds Determination of bond strength The European Standard EN 13408:2002 has the status of a British Standard ICs 91.100.99 BS EN 13408:2002 BS EN 13408:2002 Amd. No. National foreword Date Comments This Brit

2、ish Standard, having been prepared under the direction of the Materials and Chemicals Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 15 April 2002 This British Standard is the official English language version of EN 13408:200

3、2. The UKparticipation in its preparation was entrusted to Technical Committee PRV52, Adhesives, which has the responsibility to: - - aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK inte

4、rests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. Cr oss-r e fer enc e s The British Standards which implement international or European publicati

5、ons referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisio

6、ns of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an

7、 inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 15 April 2002 ISBN O 580 39508 I EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13408 March 2002 ICs 91.100.99 English version Methods of test for hydraulic

8、 setting floor smoothing and/or levelling compounds - Determination of bond strength Mthodes dessai pour les mortiers de lissage et/ou dgalisation prise hydraulique - Dtermination de la force de liaison Prfverfahren fr hydraulisch erhrtende Boden- Spachtelmassen - Bestimmung der Haftzugfestigkeit Th

9、is European Standard was approved by CEN on 30 December 2001 CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refere

10、nces concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into

11、its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal

12、, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMIT EUROPEN DE NORMALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN n

13、ational Members. Ref. No. EN 13408:2002 E EN 13408:2002 (E) Contents Foreword 3 1 2 3 4 5 6 7 8 9 10 Scope 4 Normative references 4 Terms and definitions 4 Principle 4 Safety 4 Standard test conditions . 4 Apparatus and material . 5 Procedure . 5 Evaluation and expression of results 6 Test report 6

14、2 EN 13408:2002 (E) Foreword This document EN 13408:2002 has been prepared by Technical Committee CEN/TC 193 “Adhesives“, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement,

15、at the latest by September 2002, and conflicting national standards shall be withdrawn at the latest by September 2002. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, C

16、zech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 3 EN 13408:2002 (E) 1 Scope This European Standard specifies a test method for the determination of bond strength be

17、tween a cured hydraulic setting smoothing and/or levelling compound which is referred to as ”smoothing and/or levelling compound”, and a standard substrate. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative r

18、eferences are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references

19、the latest edition of the publication referred to applies (including amendments). EN 1323, Adhesives for tiles - Concrete slab for test. EN 1937, Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedu- res. EN IS0 10365, Adhesives - Designation of main

20、 failure patterns (IS0 10365:1992). IS0 554, Standard atmospheres for conditioning and/or testing - Specifications. 3 Terms and definitions For the purposes of this European Standard, the following term and definition, and those given in EN 1937 apply. 3.1 bond strength force per unit area which has

21、 to be applied perpendicularly and centrally to the bonded area in order to produce a fa il u re 4 Principle This test method is carried out to assess the bond strength between a smoothing and/or levelling compound and a standard concrete test slab. The tensile strength of a defined area between the

22、 compound and the supporting test slab is measured. For this purpose, metal plates are bonded to the smoothing and /or levelling compound test specimen using a suitable adhesive and pulled off perpendicularly and centrally using a tensile tester. 5 Safety Persons using this standard shall be familia

23、r with normal laboratory practice. This standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish safety and health practices and to ensure compliance with any European or national regulatory conditions. 6 Standar

24、d test conditions The standard test conditions shall be (23 f 2) OC and (50 f 5) % relative humidity in accordance with IS0 554. 4 EN 13408:2002 (E) All test materials and apparatus shall be stored under these conditions for the duration of the test. The tests shall be carried out in an area where t

25、he air circulation is less than 0,2 m/s. 7 Apparatus and material 7.1 Tensile testing machine, with suitable connector for the metal plates. 7.2 Concrete slab, in accordance with EN 1323. 7.3 Flexible moulding sheets, approx. 400 mm x 400 mm with up to 16 square cavities of (50 f 1) mm x (50 f 1) mm

26、 made from silicon rubber or other suitable material. The thickness of the moulding sheets shall be (5,O f 0,5) mm or the maximum applicaton thickness of the smoothing and/or levelling compound recommended by the manufacturer, if this is lower than 5 mm. 7.4 Fast setting reactive resin adhesive, e.

27、g. epoxy, polyurethane or methyl methacrylate type. 7.5 thickness: Rigid metal plates, approx. 50 mm x 50 mm with a central connection fitting for the tensile tester. Minimum - steel: 5 mm, aluminium: 10 mm. 7.6 Smoothing andlor levelling compound mixture, in accordance with EN 1937 7.7 Primer, if s

28、pecified for the smoothing and/or levelling compound by the manufacturer 8 Procedure 8.1 Precondition i n g Precondition concrete slabs and moulding sheets for at least 24 h in the standard test conditions (clause 6) 8.2 Test procedure Eight test areas per smoothing and/or levelling compound are req

29、uired. If a primer is specified, prime the surface of the concrete slab as recommended by the manufacturer. Place the moulding sheet evenly on to the concrete slab. Ensure good contact by applying pressure using weights. Fill the cavities of the moulding sheet with the smoothing and/or levelling com

30、pound mixture immediately after the mixing procedure. Remove any surplus with a metal float in order to obtain completely filled in moulds with an even surface. Store the whole system in the standard atmosphere. Remove the moulding sheet within three days taking care not to damage the testing areas.

31、 In the 24 hours prior to testing, bond a metal plate to each of the testing areas to form eight test specimens. Ensure the adhesive is fully cured before the test is carried out. Test 14 days after mixing the smoothing and/or levelling compound. Test each test specimen using the tensile testing mac

32、hine (7.1) at a force increasing rate of (250 f 50) N/s. Report the breaking load in Newton (N) and mode of failure following EN IS0 10365 (”Cohesive failure in smoothing and/or levelling compound”, ”Cohesive failure in substrate” or ”Adhesive failure”). 5 EN 13408:2002 (E) 9 Evaluation and expressi

33、on of results Bond strength (sb expressed in Megapascal (MPa), is calculated as follows: F where F breaking load in Newton; A bonded area (= 2 500 mm) Calculate the arithmetic mean of the eight results. If one or more values differ 20 % from the arithmetic mean, discard the value which differs most

34、and recalculate the mean. If necessary repeat this procedure. If less than four results remain, the whole test shall be repeated. Record the results of the eight test specimens, the final arithmetic mean and the number of test results used. 10 Test report The test report shall include: a) a referenc

35、e to this European Standard; b) the designation of the smoothing and/or levelling compound under test, the date of manufacture and/or batch number, if known; c) the details of the primer, if used; d) the proportions of the liquid components in relation to 100 parts of powder component; e) the method

36、 of mixing the compound and the total time in minutes in accordance with EN 1937; f) the thickness used, the bond strength and mode of failure; g) any deviations from the specified test method; h) date of test. 6 BS EN 13408:2002 BSI 389 Chiswick High Road Lon don w4 4AL BSI is the independent natio

37、nal body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Re vi si ons British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess

38、 the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity o

39、f which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international

40、and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: orders&-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI

41、 implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electro

42、nic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 71 11. Fax: +44 (0)20 8996 7048. Email: infomi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial dis

43、counts on the purchase price of standards. For details ofthese and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 700 1. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:

44、/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, ofthe publications of the international standardization bodies. Except as permitted under the Copyright, Designs a

45、nd Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise -without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of

46、necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then the prior written permission ofBSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyright&-.