EN 13256-2016 en Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures《土工织物和土工织物相关产品-用于隧道和地下设施建设》.pdf

《EN 13256-2016 en Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures《土工织物和土工织物相关产品-用于隧道和地下设施建设》.pdf》由会员分享，可在线阅读，更多相关《EN 13256-2016 en Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures《土工织物和土工织物相关产品-用于隧道和地下设施建设》.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 13256:2016Geotextiles and geotextile-related products Characteristics required for usein the construction of tunnelsand underground structuresBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13256:2016 BRITISH STANDARDNational forewordThis British Standard

2、 is the UK implementation of EN 13256:2016. Itsupersedes BS EN 13256:2014+A1:2015 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/553, Geosynthetics.A list of organizations represented on this committee can beobtained on request to its secretary.This

3、publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 91347 1ICS 59.080.70Compliance with a British Standard cannot confer immu

4、nity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2016.Amendments/Corrigenda issued since publicationDate Text affectedBS EN 13256:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13256 October 2016

5、ICS 59.080.70 Supersedes EN 13256:2014+A1:2015English Version Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures Gotextiles et produits apparents - Caractristiques requises pour lutilisation dans la construction de

6、 tunnels et de structures souterraines Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften fr die Anwendung im Tunnelbau und in Tiefbauwerken This European Standard was approved by CEN on 4 June 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which

7、 stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Euro

8、pean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members ar

9、e the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro

10、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and b

11、y any means reserved worldwide for CEN national Members. Ref. No. EN 13256:2016 EBS EN 13256:2016EN 13256:2016 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions . 7 3.2 Abbreviations . 8 4

12、Required characteristics and corresponding methods of test 8 4.1 General 8 4.2 Selection of the appropriate standard in a specific application 8 4.3 Characteristics relevant to specific conditions of use 10 4.3.1 Tensile strength of seams and joints . 10 4.3.2 Friction characteristics 10 4.3.3 Resis

13、tance to damage during installation . 10 4.4 Release of dangerous substances . 10 5 Assessment and verification of constancy of performance (AVCP) . 10 5.1 General . 10 5.2 Presentation of characteristics . 10 5.3 Product type determination (PTD) 11 5.4 Factory production control (FPC) 11 5.5 Verifi

14、cation of values 12 5.6 Initial inspection of factory and of FPC 12 5.7 Continuous surveillance of FPC . 13 6 Marking 13 Annex A (normative) Factory production control . 14 A.1 Factory production control scheme 14 A.1.1 General . 14 A.1.2 Product design 14 A.1.3 Production 14 A.1.4 Finished products

15、 14 A.1.5 Provisions applicable to A.1.2, A.1.3 and A.1.4 (to be used where appropriate) 15 A.2 Assessment of a factory production control (FPC) system 16 A.2.1 General . 16 A.2.2 Checklist 16 A.2.3 Test frequency . 20 Annex B (normative) Durability aspects 22 B.1 General . 22 BS EN 13256:2016EN 132

16、56:2016 (E) 3 B.1.1 Service life . 22 B.1.2 Initial and repeat testing of durability 22 B.1.3 Use of rework material . 23 B.2 Weathering (all products) . 23 B.3 Products used in non-reinforcing applications and with service lives up to 5 years 23 B.4 Other applications and service lives up to 25 yea

17、rs, 50 years and 100 years 24 B.4.1 General . 24 B.4.2 Tests for specific materials . 24 Annex C (informative) Guidelines for the selection of the appropriate standard in a specific application 28 Annex D (informative) Significant technical changes to superseded editions of this standard 30 Annex ZA

18、 (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 31 ZA.1 Scope and relevant characteristics 31 ZA.2 Procedure for AVCP of Geotextiles and geotextiles-related products for the use in the construction of tunnels and underground str

19、uctures . 32 ZA.2.1 Systems of AVCP 32 ZA.2.2 Declaration of performance (DoP) . 34 ZA.3 CE marking and labelling . 40 Bibliography . 41 BS EN 13256:2016EN 13256:2016 (E) 4 European foreword This document (EN 13256:2016) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics”, the secret

20、ariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be withdrawn at the latest by July 2018. Attention is drawn to t

21、he possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13256:2014+A1:2015. This document has been prepared under a mandate given to CEN by the European

22、 Commission and the European Free Trade Association, and supports essential requirements of EU Regulation No 305/2011. For relationship with Regulation (EU) Nr. 305/2011, see informative Annex ZA, which is an integral part of this document. Annex D provides details of significant technical changes b

23、etween this European Standard and the previous editions. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fi

24、nland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13256:2016EN 13256:2016

25、(E) 5 Introduction This European Standard allows manufacturers to describe geotextiles and geotextile-related products on the basis of declared values for characteristics relevant to the intended use and if tested to the specified method. It also includes procedures for the assessment and verificati

26、on of constancy of performance and factory production control. This European Standard may also be used by designers, end-users and other interested parties to define which functions and conditions of use are relevant. The term “product” used in this European Standard refers to a geotextile or geotex

27、tile-related product. This European Standard is part of a series of standards, addressing the requirements for geotextiles and geotextile-related products when used in a specific application. Annex C provides guidance on how to select the appropriate standard. BS EN 13256:2016EN 13256:2016 (E) 6 1 S

28、cope This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in the construction of tunnels and underground structures, and the appropriate test methods to determine these characteristics. The intended use of these geotextiles or geotextile-r

29、elated products is to protect geosynthetic barriers used in tunnels and underground structures. This European Standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318-1. This European Standard provides for the assessment and verification of constancy of performance of the prod

30、uct to this European Standard and for factory production control procedures. Particular application cases may contain requirements regarding additional properties and preferably standardized test methods, if they are technically relevant. This European Standard may be used to derive design values by

31、 taking into account factors within the context of the definitions given in EN 1997-1 (Eurocode 7), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure. 2 Norma

32、tive references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)

33、applies. EN 12224, Geotextiles and geotextile-related products - Determination of the resistance to weathering EN 12226, Geosynthetics - General tests for evaluation following durability testing EN 12447, Geotextiles and geotextile-related products - Screening test method for determining the resista

34、nce to hydrolysis in water EN 14574, Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics EN ISO 1043-1, Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1) EN ISO 3696, Water for analytical laborator

35、y use - Specification and test methods (ISO 3696) EN ISO 9862, Geosynthetics - Sampling and preparation of test specimens (ISO 9862) EN ISO 10318-1, Geosynthetics - Part 1: Terms and definitions (ISO 10318-1) EN ISO 10319, Geosynthetics - Wide-width tensile test (ISO 10319) EN ISO 10320, Geotextiles

36、 and geotextile-related products - Identification on site (ISO 10320) EN ISO 10321, Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321) EN ISO 10722, Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused b

37、y granular material (ISO 10722) EN ISO 12236, Geosynthetics - Static puncture test (CBR test) (ISO 12236) BS EN 13256:2016EN 13256:2016 (E) 7 EN ISO 12957-1, Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1) EN ISO 12957-2, Geosynthetics - Determinat

38、ion of friction characteristics - Part 2: Inclined plane test (ISO 12957-2) EN ISO 13426-1, Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1) EN ISO 13426-2, Geotextiles and geotextile-related products - Strength of internal stru

39、ctural junctions - Part 2: Geocomposites (ISO 13426-2) EN ISO 13433, Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433) EN ISO 13438, Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438) ISO 10390, Soil quality

40、 Determination of pH ASTM D7409 15, Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns ASTM D4603 03(2011) e1, Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer 3 Terms, definitions a

41、nd abbreviations 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 10318-1 and the following apply. 3.1.1 product geotextile or geotextile-related product 3.1.2 specification document in which the work, functions and specific conditions of use of

42、the product are described 3.1.3 rework material RWM material that is generated in a process and capable of being reclaimed within the same process that generated it 3.1.4 post-consumer material PCM material generated by households or by commercial, industrial and institutional facilities in their ro

43、le as end-users of the product which can no longer be used for its intended purpose Note 1 to entry: This includes returns of material from the distribution chain. BS EN 13256:2016EN 13256:2016 (E) 8 3.1.5 post-industrial material PIM material diverted from the waste stream during a manufacturing pr

44、ocess 3.2 Abbreviations For the purposes of this document, the abbreviations given in EN ISO 1043-1 and EN ISO 10318-1 apply. AR: aramid GCO-D: geocomposite drainage 4 Required characteristics and corresponding methods of test 4.1 General The main function of geotextiles and geotextile-related produ

45、cts used in the construction of tunnels and underground structures is protection. If a drainage or erosion control system is integrated in the construction, the requirements of the appropriate standards shall also be fulfilled. The specification shall define which conditions of use are relevant (see

46、 Table 1). The producer shall provide the necessary data based on the requirements and test methods specified in this European Standard, as described in 5.1. The characteristics, their relevance to the conditions of use, and the test methods to be used, are specified in Table 1. The list of characte

47、ristics in Table 1 includes those relevant to all conditions of use (A), and those relevant to specific conditions of use (S). The indication “” means that the characteristic is not relevant for that function. Where, for the same property, data for more than one function shall be provided, the follo

48、wing ranking order shall be observed: A overrules S, and S overrules “”. The functions and conditions of use, corresponding with the S-coded characteristics in Table 1, are specified in 4.3. Durability shall be assessed in accordance with the requirements of Annex B. 4.2 Selection of the appropriate

49、 standard in a specific application Guidelines for the selection of the appropriate standard in a specific application are given in Annex C. BS EN 13256:20169 Table1 Geotextilesandgeotextile-related productsused intheconstructionoftunnelsand underground structures Functions,function-relatedcharacteristicsand testmethodstobeusedCharacteristicTestmethodFunctionsProtection(1)TensilestrengthbEN ISO10319A(2)ElongationatmaximumloadEN ISO10319A(3)Tensilestrengthofseams andjoints cdEN ISO10321S(4)Staticpunctureresistance(CBR test)abEN ISO12236see (8)(5)Dynamicperfor