EN 13163-2012 en Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification (Incorporates Amendment A2 2016)《建筑保温产品 工厂生产发泡聚苯乙烯(EPS.pdf

《EN 13163-2012 en Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification (Incorporates Amendment A2 2016)《建筑保温产品 工厂生产发泡聚苯乙烯(EPS.pdf》由会员分享，可在线阅读，更多相关《EN 13163-2012 en Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification (Incorporates Amendment A2 2016)《建筑保温产品 工厂生产发泡聚苯乙烯(EPS.pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 13163:2012Thermal insulation productsfor buildings Factory madeexpanded polystyrene (EPS)products SpecificationBS EN 13163:2012+A1:2015BS EN 13163:2012+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13163:2012+A1:2015. It

2、supersedes BS EN 13163:2012, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participa

3、tion in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of

4、a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 86751 4ICS 91.100.60Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under

5、the authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments/corrigenda issued since publicationDate Text affected31 March 2015 Implementation of CEN amendment A1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13163:2012+A1 February 2015 ICS 91.100.60 Superse

6、des EN 13163:2012English Version Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en polystyrne expans (EPS) - SpcificationWrmedmmstoffe fr Gebude - Werkmig hergestellte Pr

7、odukte aus expandiertem Polystyrol (EPS) - SpezifikationThis European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

8、European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official ver

9、sions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria

10、, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,

11、Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN na

12、tional Members. Ref. No. EN 13163:2012+A1:2015 EEN 13163:2012+A1:2015 (E) 2 Contents Page Foreword 5 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols, units and abbreviated terms .9 3.1 Terms and definitions .9 3.2 Symbols, units and abbreviated terms . 10 4 Requirements 13 4.1 Gener

13、al . 13 4.2 For all applications . 13 4.2.1 Thermal resistance and thermal conductivity . 13 4.2.2 Length and width 14 4.2.3 Thickness 14 4.2.4 Squareness 14 4.2.5 Flatness . 14 4.2.6 Reaction to fire of the product as placed on the market 15 4.2.7 Durability characteristics . 15 4.3 For specific ap

14、plications 15 4.3.1 General . 15 4.3.2 Dimensional stability 15 4.3.3 Squareness 16 4.3.4 Compressive stress at 10 % deformation 16 4.3.5 Bending strength 17 4.3.6 Tensile strength perpendicular to faces 18 4.3.7 Deformation under specified compressive load and temperature conditions . 18 4.3.8 Comp

15、ressive creep . 18 4.3.9 Shear behaviour 19 4.3.10 Cyclic loading behaviour . 19 4.3.11 Water absorption 19 4.3.12 Freeze-thaw resistance 19 4.3.13 Water vapour transmission . 20 4.3.14 Dynamic stiffness . 20 4.3.15 Compressibility (only applicable on EPS T products) 21 4.3.16 Apparent density. 22 4

16、.3.17 Reaction to fire of the product in standardised assemblies simulating end-use applications . 22 4.3.18 Continuous glowing combustion 22 4.3.19 Release of dangerous substances 22 5 Test methods . 22 5.1 Sampling 22 5.2 Conditioning 23 5.3 Testing . 23 5.3.1 General . 23 5.3.2 Thermal resistance

17、 and thermal conductivity . 23 6 Designation code 26 BS EN 13163:2012+A1:2015EN 13163:2012+A1:2015 (E)EN 13163:2012+A1:2015 (E) 2 Contents Page Foreword 5 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols, units and abbreviated terms .9 3.1 Terms and definitions .9 3.2 Symbols, units

18、and abbreviated terms . 10 4 Requirements 13 4.1 General . 13 4.2 For all applications . 13 4.2.1 Thermal resistance and thermal conductivity . 13 4.2.2 Length and width 14 4.2.3 Thickness 14 4.2.4 Squareness 14 4.2.5 Flatness . 14 4.2.6 Reaction to fire of the product as placed on the market 15 4.2

19、.7 Durability characteristics . 15 4.3 For specific applications 15 4.3.1 General . 15 4.3.2 Dimensional stability 15 4.3.3 Squareness 16 4.3.4 Compressive stress at 10 % deformation 16 4.3.5 Bending strength 17 4.3.6 Tensile strength perpendicular to faces 18 4.3.7 Deformation under specified compr

20、essive load and temperature conditions . 18 4.3.8 Compressive creep . 18 4.3.9 Shear behaviour 19 4.3.10 Cyclic loading behaviour . 19 4.3.11 Water absorption 19 4.3.12 Freeze-thaw resistance 19 4.3.13 Water vapour transmission . 20 4.3.14 Dynamic stiffness . 20 4.3.15 Compressibility (only applicab

21、le on EPS T products) 21 4.3.16 Apparent density. 22 4.3.17 Reaction to fire of the product in standardised assemblies simulating end-use applications . 22 4.3.18 Continuous glowing combustion 22 4.3.19 Release of dangerous substances 22 5 Test methods . 22 5.1 Sampling 22 5.2 Conditioning 23 5.3 Te

22、sting . 23 5.3.1 General . 23 5.3.2 Thermal resistance and thermal conductivity . 23 6 Designation code 26 EN 13163:2012+A1:2015 (E) 37 Assessment and Verification of the Constancy of Performance (AVCP) 27 7.1 General . 27 7.2 Product Type Determination (PTD) 27 7.3 Factory Production Control (FPC)

23、. 27 8 Marking and labelling 27 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 29 A.1 General . 29 A.2 Input data 29 A.3 Declared values . 29 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) 31 B.

24、1 !Product type determination“ and factory production control . 31 B.2 Indirect testing for factory production control . 36 Annex C (normative) Product classification 39 Annex D (normative) Multi layered EPS products . 41 D.1 General . 41 D.2 Requirements . 41 D.3 Test methods . 42 D.4 Evaluation of

25、 conformity 42 Annex E (informative) Verification of the reaction to fire classification of raw materials . 43 E.1 General . 43 E.2 Material covered by this annex 43 E.3 Preparation of samples . 43 E.4 !Product type determination“ for EPS raw material . 43 E.5 Factory Production Control for EPS raw

26、material . 44 E.6 Certification of conformity for EPS raw material . 44 E.7 Continuous surveillance of EPS raw material 45 E.8 Material certificate for EPS raw material . 45 E.9 Requirement for raw material supply 46 Annex F (informative) Additional properties 47 F.1 General . 47 F.2 Long-term compr

27、essive behaviour . 47 F.3 Shear behaviour 47 F.4 Water vapour diffusion resistance factor . 48 F.5 Examples of determination of thermal conductivity 48 F.6 Additional information 49 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Re

28、gulation 50 Bibliography 61 Tables Table 1 Classes of dimensional tolerances 14 Table 2 Dimensional stability under specified temperature or specified temperature and humidity conditions 16 Table 3 Levels for compressive stress at 10 % deformation 17 Table 4 Levels for bending strength 17 Table 5 Le

29、vels of deformation under specified compressive load and temperature conditions 18 Table 6 Levels for dynamic stiffness . 20 Table 7 Classes for thickness tolerances . 21 BS EN 13163:2012+A1:2015EN 13163:2012+A1:2015 (E)EN 13163:2012+A1:2015 (E) 4 Table 8 Levels for compressibility 21 Table 9 Test m

30、ethods, test specimens and conditions. 24 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 30 Table B.1 Number of tests for !PTD“ and minimum product testing frequencies 31 Table B.2 Minimum product testing frequencies for the reaction to fire characteri

31、stics 34 Table C.1 Classification of EPS products . 39 Table C.2 Classification EPS products with acoustical properties . 40 Table E.1 Testing frequency of raw material 45 Table F.1 Correlation between bending strength and shear strength . 47 Table F.2 Tabulated values of water vapour diffusion resi

32、stance index and water vapour permeability . 48 Table ZA.1 Relevant clauses for factory made expanded polystyrene and intended use 51 Table ZA.2 Systems of AVCP . 52 Table ZA.3.1 Assignment of AVCP tasks for factory made expanded polystyrene products under system 1 for reaction to fire and system 3

33、(see Table ZA.2) . 53 Table ZA.3.2 Assignment of AVCP tasks for factory made expanded polystyrene products under system 3 (see Table ZA.2) . 54 Table ZA.3.3 Assignment of AVCP tasks for factory made expanded polystyrene products under combined system 4 for reaction to fire and system 3 (see Table ZA

34、.2) . 55 Figures Figure B.1 Relationship between compressive stress at 10 % deformation and apparent density for indirect testing . 37 Figure F.1 Example of a relationship between thermal conductivity (at 50 mm reference thickness and 10 C mean temperature) apparent density for indirect testing of n

35、on infrared absorbing EPS 49 Figure ZA.1 Example CE marking information of products under AVCP system 3“ . 60 BS EN 13163:2012+A1:2015EN 13163:2012+A1:2015 (E)EN 13163:2012+A1:2015 (E) 4 Table 8 Levels for compressibility 21 Table 9 Test methods, test specimens and conditions. 24 Table A.1 Values fo

36、r k for one sided 90 % tolerance interval with a confidence level of 90 % . 30 Table B.1 Number of tests for !PTD“ and minimum product testing frequencies 31 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 34 Table C.1 Classification of EPS products . 39 Table

37、C.2 Classification EPS products with acoustical properties . 40 Table E.1 Testing frequency of raw material 45 Table F.1 Correlation between bending strength and shear strength . 47 Table F.2 Tabulated values of water vapour diffusion resistance index and water vapour permeability . 48 Table ZA.1 Re

38、levant clauses for factory made expanded polystyrene and intended use 51 Table ZA.2 Systems of AVCP . 52 Table ZA.3.1 Assignment of AVCP tasks for factory made expanded polystyrene products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 53 Table ZA.3.2 Assignment of AVCP tasks f

39、or factory made expanded polystyrene products under system 3 (see Table ZA.2) . 54 Table ZA.3.3 Assignment of AVCP tasks for factory made expanded polystyrene products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) . 55 Figures Figure B.1 Relationship between compressive

40、stress at 10 % deformation and apparent density for indirect testing . 37 Figure F.1 Example of a relationship between thermal conductivity (at 50 mm reference thickness and 10 C mean temperature) apparent density for indirect testing of non infrared absorbing EPS 49 Figure ZA.1 Example CE marking i

41、nformation of products under AVCP system 3“ . 60 EN 13163:2012+A1:2015 (E) 5Foreword This document (EN 13163:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given th

42、e status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be t

43、he subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Dire

44、ctive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document supersedes !EN 13163:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or al

45、tered by amendment is indicated in the text by tags !“. The main changes to EN 13163:2008 are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new annex on multi-layered products; c) new annex on volu

46、ntary verification of the reaction to fire classification of raw materials; d) changes on some editorial and technical content and addition of information on some specific items such as for EPS dimensional stability, compressibility; e) addition of links to EN 15715, Thermal insulation products Inst

47、ructions for mounting and fixing for reaction to fire testing Factory made products; f) changes to the Annex ZA. !Amendment 1 modifies EN 13163:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR).

48、 This amendment introduces g) an addition to the foreword; h) an addition in 3.2; i) a new subclause 4.3.19; j) modification of Clause 7; k) modification of Clause 8; BS EN 13163:2012+A1:2015EN 13163:2012+A1:2015 (E)EN 13163:2012+A1:2015 (E) 6 l) modification of Annex B; m) modification of Annex E;

49、n) a new Annex ZA.“ This standard is one of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of wh