ECMA 201-1994 Data Interchange on 90 mm Optical Disk Cartridges - Capacity 230 Megabytes per Cartridge《90 mm盒式光盘上的数据交换 容量 230 Megabytes 盒 第2版》.pdf

《ECMA 201-1994 Data Interchange on 90 mm Optical Disk Cartridges - Capacity 230 Megabytes per Cartridge《90 mm盒式光盘上的数据交换 容量 230 Megabytes 盒 第2版》.pdf》由会员分享，可在线阅读，更多相关《ECMA 201-1994 Data Interchange on 90 mm Optical Disk Cartridges - Capacity 230 Megabytes per Cartridge《90 mm盒式光盘上的数据交换 容量 230 Megabytes 盒 第2版》.pdf（108页珍藏版）》请在麦多课文档分享上搜索。

1、 STD.ECMA ZOL-ENGL 3974 3904593 0035382 887 R Standard ECMA-201 2nd Edition - December 1994 ECMA Standardizing Information and Communication Systems - Data Interchange on 90 mm Optical Disk Cartridges = Capacity: 230 Megabytes per Cartridge Phone: 41 22 849.60.00 - Fax: 41 22 849.60.01 - ECMANEWS +4

2、122 735.33.29 - Internat: HelpdsskECMACH STD.ECMA 201-ENGL 1774 3404593 003513 315 = Standard ECMA-20 1 ECMA 2nd Edition - December 1994 Standardizing Information and Communication Systems Data Interchange on 90 mm Optical Disk Cartridges - Capacity: 230 Megabytes per Cartridge Phons: t41 22 849.60.

3、00 - hx: t41 22 849.60.01 - ECMANEWS: t41 22 735.33.29 - Internit: HelpdeskECMACH MB-E-ZOl-lI.DM:-M.05.95 16.40 STD-ECMA 201-ENGL 1994 3404593 0035384 b53 0 Brief History Technical Committee ECMA TC31 for Optical Disk Cartridges (ODC) was set up in 1984. The Committee made major contributions to ISO

4、IIEC JTCllSC23 for the development of standards for 90 mm. 120 mm. 130 mm, 300 mm and 356 mm ODCs. ECMA produced camera-ready copies for most International ODC Standards. In addition, ECMA published the following OM3 Standards: ECMA-130 (1988) Data Interchange on Read-only 120 mm Optical Data Disks

5、(CD-ROM) ECMA-153 (1991) Information Interchange on 130 mm Optical Disk Camidges of the Write Once, Read Multiple (WORM) Type, using the Magneto-Optical Effect ECMA-154 (1991) Data Interchange on 90 mm Optical Disk Cartridges, Read Only and Rewritable, M.O. ECMA- 183 (1992) Data Interchange on 130 m

6、m Optical Disk Camidges - Capacity: 1 Gbyte ECMA- 1 84 (1992) Data Interchange on 130 mm Optical Disk Cartridges - Capacity: 1,3 Gbytes ECMA-189 (1993) Information Interchange on 300 mm ODCs of the WORM Type using the SSF Method ECMA- 190 (1993) Information Interchange on 300 mm OKs of the WORM Type

7、 using the CCS Method ECMA- 1 95 ( 1993) Data Interchange on 130 mm Optical Disk Cartridges - Capacity: 2 Gigabytes per Carhidge The first five of these ECMA Standards have been adopted under the fast-track procedure of ISOIIEC as International Standards ISO/IEC 10149. ISOAEC 11560, ISO/IEC 1o090, I

8、SOiiEC 13481 and ISOAEC 13549, respectively. The corresponding International Standards to ECMA-189, ECMA-190 and ECMA-195 are ISOIIEC 13403. ISO/IEc 13614 and ISOAEC 13842. respectively. ECMA-183, ECMA- 184 and ECMA-195 are JXMA Standards for 130 mm ODCs of different capacities, based on the optical

9、 disk carfridge specified in ISOIIEC 10089. Whilst the latter specifies a fully-rewritable disk, these ECMA Standards specify several related implementations depending on the application considered. Two or more Types are defined including fully- rewritable (Type WW), partially pre-recorded and parti

10、ally rewnkable (Type P-ROM), fully pre-recorded (Type O-ROM) disks or cartridges, and those with write once read multiple functionality (Type WO). A similar trend, towards more Types and increasing capacities, is followed by 90 mm ODCs based on the optical disk cartridge specified in ECMA-154 (ISOii

11、EC 1o090). The present ECMA Standard is a standard of the 90 mm ODC series. It specifies three Types providing a capacity of 230 Megabytes per cartridge. Adopted as an ECMA Standard by the General Assembly of December 1994. STDmECMA 201-ENGL 1994 598 m Brief History Technical Committee ECMA TC31 for

12、 Optical Disk Cartridges (ODC) was set up in 1984. The Committee made major contributions to ISOfiEC JTClISC23 for the development of standards for 90 mm, 120 mm, 130 mm, 300 mm and 356 mrn ODCs. ECMA produced camera-ready copies for most International ODC Standards. In addition, ECMA published the

13、following ODC Standards: ECMA- 130 (1 988) Data Interchange on Read-only 120 mm Optical Data Disks (CD-ROM) ECMA-153 (1991) Information Interchange on 130 mm Optical Disk Cartridges of the Write Once, Read Multiple (WORM) Type, using the Magneto-opticai Effect ECMA-154 (1991) Data Interchange on 90

14、mm Optical Disk Cartridges, Read Only and Rewritable, M.O. ECMA- 183 ( 1992) Data Interchange on 130 mm Optical Disk Camidges - Capacity: 1 Gbyte ECMA-I 84 (1992) Data Interchange on 130 rnm Optical Disk Camidges - Capacity: 1,3 Gbytes ECMA-I89 (1993) Information Interchange on 300 rnm ODCs of the W

15、ORM Type using the SSF Method ECMA-190 (1993) Information Interchange on 300 mm ODCs of the WORM Type using the CCS Method ECMA-195 (1993) Data Interchange on 130 mm Optical Disk Cartridges - Capacity: 2 Gigabytes per Cartridge The first five of these ECMA Standards have been adopted under the fast-

16、track procedure of ISOIIEC as Intemational Standards ISO/LEC 10149, ISO/IEC 11560, ISOAEC 10090, ISOAEC 13481 and ISflEC 13549, respectively. The corresponding Intemational Standards to ECMA-189, ECMA-190 and ECMA-195 are ISOAEC 13403, ISOAEC 13614 and ISO/IEC 13842, respectively. ECMA- 183, ECMA-18

17、4 and ECMA-195 are ECMA Standards for 130 mrn ODCs of different capacities, based on the optical disk cartridge specified in ISOAEC 10089. Whilst the latter specifies a fully-rewritable disk, these ECMA Standards specify several related implementations depending on the application considered. Two or

18、 more Types are defined, including fully- rewritable (Type WW), partially pre-recorded and partially rewritable (Type P-ROM), fully pre-recorded (Type O-ROM) disks or cartridges, and those with write once read multiple functionality (Type WO). A similar trend, towards more Types and increasing capac

19、ities, is followed by 90 m ODCs based on the optical disk cartridge specified in ECMA-154 (ISOfiEC 1oO90). The present ECMA Standard is a standard of the 90 mm ODC senes. It specifies three Types providing a capacity of 230 Megabytes per cartridge. Adopted as an ECMA Standard by the General Assembly

20、 of December 1994. STD-ECMA 20L-ENGL Section 1 - General 1 scope 2 Conformance 2.1 Optical disk cartridge (ODC) 2.2 Generating system 2.3 Receiving system 2.4 Compatibility statement 3 Reference 4 Definitions 4.1 band 4.2 case 4.3 Channel bit 4.4 clamping zone 4.5 control track 4.6 Cyclic Redundancy

21、 Check (CRC) 4.7 defect management 4.8 disk reference plane 4.9 embossed mark 4.1 O entrance surface 4.1 1 Emor Correction Code (ECC) 4.12 field 4.13 format 4.14 fully embossed disk 4.15 fully rewritable disk 4.16 groove 4.17 hub 4.18 interleaving 4.19 Kerr rotation 4.20 land and groove 4.21 logical

22、 track 4.22 mark 4.23 optical disk 4.24 optical disk cartridge (ODC) 4.25 partially embossed disk 4.26 physical track 4.27 physical track group 4.28 pitch 4.29 polarization 4.30 read power 4;31 recording layer 4.32 Reed-Solomon code 4.33 sector 4.34 spindle 4.35 substrate 4.36 ZCAV 3794 3404593 0035

23、386 424 Table of contents Page 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 - - STD.ECMA 201-ENGL 1994 3404573 00351B7 360 I 4.31 zone 5 Conventions and notations 5.1 Representation of numbers 5.2 Names 6 List of acronyms 7 General description of the opticai disk c

24、artridge 8 General requirements 8.1 Environments 8.1.1 Testing environment 8.1.2 Operating environment 8.1.3 Storage environment 8.1.4 Transportation 8.2 Temperature shock 8.3 Safety requirements 8.4 Flammability 9 Reference Drive 9.1 Optical system 9.2 Optical beam 9.3 Read channels 9.4 Tracking 9.

25、5 Rotation of the disk Section 2 - Mechanid and physical charactenstics i0 Dimensional and physical characteristics of the case 10.1 General description of the case 10.2 Reference planes of the case 10.3 Dimensions of the case 10.3.1 Overall dimensions 10.3.2 Location hole 10.3.3 Alignment hole 10.3

26、.4 Reference surfaces 10.3.5 Detents 10.3.6 Functional Areas 10.3.7 Spindle and head windows 10.3.8 Shutter 10.3.9 Path for shutter opener and shutter sensor notch 10.3.10 Mis-insert protections 10.3.1 1 Gripper slots 10.3.12 Label area 10.4 Mechanical characteristics 10.4.1 Matenai 10.4.2 Mass 10.4

27、.3 Edge distortion 10.4.4 Compliance 10.4.5 Shutter opening force 4 4 4 4 5 5 6 9 9 9 9 9 9 10 10 10 11 11 12 13 13 14 14 15 15 15 15 15 15 15 11 Dimensional, mechanical and physical characteristics of the disk 1 1.1 General description of the disk 11.2 Reference axis and plane of the disk 1 1.3 Dim

28、ensions of the disk 11.3.1 Hub dimensions 11.3.2 Clamping zone il .4 Mechanical characteristics 1 1.4.1 Material 1 1.4.2 Mass 1 1.4.3 Moment of inertia 1 1.4.4 Imbalance 1 1.4.5 Axial deflection 11.4.6 Axial acceleration 1 1.4.7 Radial runout 1 1.4.8 Radial acceleration 1 i .4.9 Tilt 1 1.5 Optical c

29、haractenstics 11.5.1 Index of refraction 1 1 S.2 Thickness of the substrate 11.5.3 Birefringence 1 1 S.4 Reflectance 12 Interface between cartridge and drive 12.1 Clamping method 12.2 Clamping force 12.3 Capture cylinder 12.4 Disk position in operating condition Section 3 - Format of information 13

30、Geometry of physical tracks 13.1 Physical track shape 13.2 Direction of track spiral 13.3 Physical track pitch 14 Track format 14.1 Track number 14.2 Track layout 14.3 Clock frequencies and periods 14.4 Radial alignment 14.5 Sector number 15 Sector format 15.1 Sector layout 15.2 Sector Mark (SM) 15.

31、3 VFO fields - 15.4 Address Mark (Mi 15.5 ID fields 15.6 Postambles (PA) 15.7 Offset Detection Field (ODF) 15.8 Gap 15.9 Sync 27 27 27 27 27 28 29 29 29 29 29 29 29 29 30 30 30 30 30 30 30 31 31 31 31 31 33 33 33 33 33 33 33 33 33 34 34 34 34 35 -36 36 37 37 37 37 37 - - STDmECMA 201-ENGL 1994 34045

32、93 0035189 133 15.10Datafield 15.10.1 User data bytes 15.10.2 CRC and ECC bytes 15.10.3 Resync bytes 15.1 1 Buffer field 16 Recording code 17 Format of the Information Zone 17.1 General description of the information Zone 17.2 Division of the Information Zone 17.2.1 Initial Zone 17.2.2 Acquire Zone

33、17.2.3 Test Zones 17.2.4 Control Zones 17.2.5 Data Zone 17.2.6 Buffer Zone 18 Format of the Data Zone 18.1 Buffer tracks in the Data Zone 18.2 Defect Management Areas (DMAs) 18.3 Disk Definition Structure (DDS) 18.3.1 Fully rewritable disks 18.3.2 Fully embossed disks 18.3.3 Partially embossed disks

34、 18.4.1 Fully rewritable disks 18.4.2 Partially embossed disks 18.4.3 Fully embossed disks 18.4 Partitioning 19 Defect management 19.1 Rewritable groups: Spare sectors 19.1.1 initialization of the disk 19.1.2 Certification 19. I .3 Disks not certified 19.1.4 Write procedure 19.1.5 Primary Defect Lis

35、t (PDL) 19.1.6 Secondary Defect List (SDL) 19.2 Embossed groups: Parity sectors Section 4 - Characteristics of embossed information 20 Method of testing 20.1 Environment 20.2 Use of the Reference Drive 20.2.1 Optics and mechanics 20.2.2 Read power 20.2.3 Read channels 20.2.4 Tracking 20.3 Definition

36、 of signals 37 37 38 38 38 38 39 39 39 40 40 41 41 41 41 41 42 42 43 44 45 45 45 45 45 45 48 48 48 48 49 49 49 49 50 51 51 51 51 51 51 52 52 52 STD-ECMA 203-ENGL 3994 I 3404593 0035390 955 - 21 Signas from grooves 21.1 Cross-track signal 21.2 Cross-Track minimum signai 21.3 Push-pull signal 21.4 Div

37、ided push-pull signal 21.5 Phase depth 21.6 Track location 22 Signais from Headers 22.1 Sector Mark 22.2 VFOI and VF02 22.3 Address Mark, ID field and Postamble 23 Signais from embossed Recording fields Section 5 - Characteristics of the recording layer 24 Method of testing 24.1 Environment 24.2 Ref

38、erence Drive 24.2.1 Optics and mechanics 24.2.2 Read power 24.2.3 Read channel 24.2.4 Tracking 24.3 Write conditions 24.3.1 Write pulse 24.3.2 Write power and pulse width 24.3.3 Write magnetic field 24.4 Erase conditions 24.4.1 Erase power 24.4.2 Erase magnetic field 24.5 Definition of signals 25 Ma

39、gneto-opticai characteristics 25.1 Figure of ment 25.2 Imbalance of the magneto-optical signal 26 Write characteristics 26.1 Resolution 26.2 Narrow-band signal-to-noise ratio 26.3 Cross-talk 27 Erase characteristics Section 6 - Characteristics of user data 28 Method of testing 28.1 Environment 28.2

40、Reference Drive 54 54 54 54 55 55 55 56 56 56 56 56 56 56 57 57 57 57 57 57 57 57 58 59 59 59 59 59 59 59 60 60 60 60 61 61 62 62 62 62 STD ECMA 28.2.1 Optics and mechanics 28.2.2 Read power 28.2.3 Read amplifiers 28.2.4 Analog-to-binary converters 28.2.5 Error correction 28.2.6 Tracking 29 Minimum

41、quality of a sector 29.1 Headers 29.1.1 Sector Mark 29.1.2 ID fields 29.2 User-written data 29.3 Embosseddata 30 Data interchange requirements 30.1 Tracking 30.2 User-written data 30.3 Embossed data 30.4 Quality of disk Annexes 201-ENGL 1994 3404593 0035L91 891 A - Edgedistortiontest B - Compliancet

42、est C - Track deviation measurement D - CRC for ID fields E - format of the Data field of a sector F - Contents of the Control Zones G - Guidelines for sector replacement H - Measurement of the figure of merit J - Read power, write power and erase power K - Test method for measuring the adsorbent fo

43、rce of the hub L - Derivation of the operating climatic environment M - Air cleanliness class 100 o00 N - Position of the cartridge relative to the reference planes P - Transportation Q - Ofliceenvironment R - Relaxation by zones of the requirements for signals S - Values to be implemented in existi

44、ng and future standards 62 62 62 62 62 62 62 63 63 63 63 63 63 63 63 63 63 65 67 69 73 75 79 87 89 91 93 95 99 101 103 1 05 1 07 109 STD-ECMA 201-ENGL 1974 E 3404593 0035192 i28 E Section 1 - General 1 scope This ECMA Standard specifies the characteristics of 90 mm Optical Disk Cam-idges (ODC) with

45、a capacity of 230 Mbytes per Cartridge. The Standard specifies three related, but different implementations of such cartridges, viz. Type R/W Provides for data to be written, read and erased many times over the whole recording surface of the disk using the thermo-magnetic and magneto-opticai effects

46、. Type P-ROM Provides for a part of the disk surface to be embossed by stamping or other means. This part of the disk is read without recourse to the magneto-opticai effect. All parts which are not embossed provide for data to meet the requirements of Type RMr. means. This type of disk is read witho

47、ut recourse to the magneto-optical effect. Type O-ROM Provides for the whole of the disk surface to be embossed and reproduced by stamping or other Type RW, Type P-ROM and Type O-ROM are also referred to as “fully rewntable“. “partially embossed“ and “fully embossed“, respectively. This ECMA Standar

48、d specifies - the conditions for conformance testing and the Reference Drive; - the environments in which the cartridges are to be operated and stored; - the mechanical and physical characteristics of the cartridge, so as to provide mechanical interchangeability between data processing systems; - th

49、e format of the information on the disk, both embossed and user-written; including the physical disposition of the tracks and sectors, the error correction codes, and the modulation method used; - the characteristics of the embossed information on the disk; - the magneto-opticai characteristics of the disk, enabling processing systems to write data onto the disk; - the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk. This ECMA Standard provides for interchange between optical disk drives. To