DLA W-C-596 157 B-2012 CONNECTOR RECEPTACLE ELECTRICAL SPECIFIC PURPOSE SINGLE LOCKING GROUNDING 4 POLE 5 WIRE 30 AMPERES 120 208 VOLTS 3 PHASE Y 400 HERTZ.pdf

《DLA W-C-596 157 B-2012 CONNECTOR RECEPTACLE ELECTRICAL SPECIFIC PURPOSE SINGLE LOCKING GROUNDING 4 POLE 5 WIRE 30 AMPERES 120 208 VOLTS 3 PHASE Y 400 HERTZ.pdf》由会员分享，可在线阅读，更多相关《DLA W-C-596 157 B-2012 CONNECTOR RECEPTACLE ELECTRICAL SPECIFIC PURPOSE SINGLE LOCKING GROUNDING 4 POLE 5 WIRE 30 AMPERES 120 208 VOLTS 3 PHASE Y 400 HERTZ.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 AMSC N/A FSC 5935 INCH-POUND W-C-596/157B 12 October 2012 SUPERSEDING W-C-596/157A 3 May 1988 FEDERAL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, ELECTRICAL, SPECIFIC PURPOSE, SINGLE, LOCKING, GROUNDING, 4 POLE, 5 WIRE, 30 AMPERES, 120/208 VOLTS, 3 PHASE Y, 400 HERTZ The General Services Administrat

2、ion has authorized the use of this federal specification, by all federal agencies. The complete requirements for procuring connector described herein shall consist of this document and the latest issue in effect of W-C-596. FIGURE 1. Configuration and dimensions. Inches mm 0.093 2.36 0.100 2.54 0.10

3、5 2.67 0.109 2.77 0.114 2.90 0.166 4.22 0.205 5.21 0.212 5.38 0.281 7.14 0.352 8.94 0.500 12.70 1.250 31.75 1.750 44.45 1.800 45.72 2.875 73.02 Inactive for new design after 12 October 2012. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-W-C-596/157

4、B 2 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. For mounting dimensions see figure 11 configuration A of the basic specification. 4. Unless otherwise specified, tolerance is .005 (0.13 mm) on all decimals and 5 on angles. FIGURE 1. Configuration and d

5、imensions Continued. REQUIREMENTS: Design and configuration: See figure 1. Ratings: Voltage: 120/208 volts, 3 phase Y. Current: 30 amperes. Frequency: 400 hertz. Vibration: Method 204 of MIL-STD-202, test condition B (WC596/157-2 only). Shock: Method 213 of MIL-STD-202, test condition I (WC596/157-2

6、 only). Mating connector: W-C-596/158 Part or Identifying Number (PIN): The PIN consists of the prefix W-C, the basic specification number, the specification sheet number, and the style number. W-C- 596 /157 -1 Style number (see table I) Specification sheet number Specification number W-C Prefix TAB

7、LE I. Dash number. Dash no. Supersedes style Description 1 2 ruggedizedChanges from previous issue. Marginal notations are not used in the revision to identify changes with respect to the previous issue due to the extensiveness of the changes. Referenced documents. In addition to W-C-596, this docum

8、ent references the following: W-C-596/158 MIL-STD-202 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-W-C-596/157B 3 CONCLUDING MATERIAL MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITIES: Custodians: DCGOVT DCG Army - CR DOT - ACO Navy - YD GS

9、A - 7FXE Air Force - 85 HHS FEC DLA - CC USDA - AFS Review activities: Preparing activity: Army AR, AV, CR4, MI DLA - CC Navy - AS, EC, MC, SH Air Force 19, 99 (Project 5935-2012-174) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-