DLA MS51516 REV A (1)-1998 TEE TUBE BULKHEAD ON RUN 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式三岔管舱壁》.pdf

《DLA MS51516 REV A (1)-1998 TEE TUBE BULKHEAD ON RUN 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式三岔管舱壁》.pdf》由会员分享，可在线阅读，更多相关《DLA MS51516 REV A (1)-1998 TEE TUBE BULKHEAD ON RUN 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度扩口式三岔管舱壁》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 flS5353b REV A (3) m 9999932 0090370 193 -1 MS51516A AMENDMENT1 . 9 April 1998 MI LITARY STANDARD TEE, TUBE, BULKHEAD ON RUN, 37 DEGREE FLARED This amendment forms a part of MS51516A, dated 17 January 1979, and is approved for use by all Departments and Agencies of the Department of Defense. PAGE 1

2、 NOTES: Add new note as follows: “9. The undercut shown on the bulkhead end of the fitting shall be disregarded.” Parts manufactured prior to the date of this amendment are acceptable for use until exhausted. Custodians: Army - AR Navy - OS Review Activities: Army - AT, CR-4 Navy - MC,YD-1 Preparing Activity: DIA - CC (Project 4730-0833) AMSC N/A I of I FSC 4730 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-