DLA MS17346 REV F-2013 CONNECTOR RECEPTACLE ELECTRICAL BOX MOUNTING.pdf

《DLA MS17346 REV F-2013 CONNECTOR RECEPTACLE ELECTRICAL BOX MOUNTING.pdf》由会员分享，可在线阅读，更多相关《DLA MS17346 REV F-2013 CONNECTOR RECEPTACLE ELECTRICAL BOX MOUNTING.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 DETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, ELECTRICAL, BOX MOUNTING This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-22992. FI

2、GURE 1. Dimensions and configuration. AMSC N/A FSC 5935 MS17346F 16 January 2013 SUPERSEDING MS17346E 26 October 2005 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17346F 2 FIGURE 1. Dimensions and configuration - Continued. Provided b

3、y IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17346F 3 Shell size A Thread (plated) class 2A D dia + .005 - .010 K + .021 - .010 L + .020 - .030 12 0.8750-0.1P-0.2L-DS .567 .938 .640 14 1.0000-0.1P-0.2L-DS .692 16 1.1250-0.1P-0.2L-DS .817 18 1.2500-0.1P-0.

4、2L-DS .942 .953 .625 20 1.3750-0.1P-0.2L-DS 1.068 22 1.5000-0.1P-0.2L-DS 24 1.7500-0.1P-0.2L-DS 1.317 1.047 .594 28 2.0000-0.1P-0.2L-DS 1.536 32 2.2500-0.1P-0.2L-DS 1.786 1.110 .531 36 2.5000-0.1P-0.2L-DS 2.005 40 2.7500-0.1P-0.2L-DS 2.255 44 3.0000-0.1P-0.2L-DS 2.545 FIGURE 1. Dimensions and config

5、uration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17346F 4 Shell size N + .010 - .000 R (TP) S + .021 - .020 T dia .005 KK dia + .011 - .010 12 .797 .906 1.188 .150 .640 14 .969 1.281 .765 16 1.062 1.375 .890 18 1.156 1.500 .177

6、1.015 20 1.250 1.625 1.171 22 1.375 1.750 1.296 24 .859 1.562 2.000 1.421 28 1.750 2.250 1.625 32 .922 1.938 2.500 .209 1.891 36 2.188 2.750 2.078 40 2.375 3.000 2.312 44 2.625 3.250 2.562 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking

7、permitted without license from IHS-,-,-MS17346F 5 Shell size YY dia + .010, - .006 AAA BBB CCC 12 .647 .126 -.001, +.007 .063 -.001, +.007 .0035 14 .772 16 .897 .182 -.001, +.010 .108 -.001, +.010 .007 18 1.022 20 1.148 22 1.272 24 1.473 .260 -.001, +.010 .155 -.001, +.010 28 1.692 32 1.942 36 2.161

8、 40 2.411 44 2.692 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17346F 6 Shell size DDD Socket insert location .030 EEE Pin insert location .030 Z max Z min (contact size 0 only) 12 .020 .729 .

9、738 NA 14 .738 16 18 .723 20 .780 22 24 .660 .686 28 32 .540 .622 36 40 44 .039 .764 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17346F 7 NOTES: 1. All dimensions are in inches. 2. Unless othe

10、rwise specified tolerances are .016 inch (0.41 mm). 3. Metric equivalents are given for information only. 4. For protective cover, see MS17349. FIGURE 1. Dimensions and configuration - Continued. Inches mm Inches mm Inches mm Inches mm .001 .0035 .005 .006 .007 .010 .011 .020 .021 .030 .031 .039 .06

11、2 .063 .108 .126 .150 .155 .177 .182 .209 .260 .531 .540 .567 .594 .622 0.03 0.09 0.13 0.15 0.18 0.25 0.28 0.51 0.53 0.76 0.79 0.99 1.57 1.60 2.74 3.20 3.81 3.93 4.50 4.62 5.30 6.60 13.49 13.72 14.40 15.09 15.80 .625 .640 .647 .660 .672 .686 .692 .723 .729 .738 .764 .765 .772 .780 .797 .817 .859 .87

12、50 .890 .897 .906 .922 .938 .942 .953 .969 1.000 15.88 16.26 16.43 16.76 17.06 17.42 17.58 18.36 18.52 18.75 19.41 19.43 19.61 19.81 20.24 20.75 21.81 22.225 22.61 22.78 23.01 23.42 23.82 23.93 24.21 24.61 25.40 1.015 1.022 1.047 1.062 1.068 1.110 1.125 1.148 1.156 1.171 1.188 1.250 1.272 1.281 1.29

13、6 1.317 1.375 1.421 1.473 1.500 1.536 1.562 1.625 1.692 25.78 25.96 26.59 26.97 27.13 28.19 28.60 29.16 29.36 29.74 30.18 31.75 32.31 32.54 32.91 33.45 34.93 36.09 37.41 38.10 39.01 39.67 41.27 42.98 1.750 1.786 1.891 1.938 1.942 2.000 2.005 2.078 2.161 2.188 2.250 2.255 2.312 2.375 2.411 2.500 2.54

14、5 2.562 2.625 2.692 2.750 3.000 3.250 44.45 45.36 48.03 49.23 49.33 50.80 50.93 52.78 54.89 55.57 57.15 57.28 58.72 60.33 61.24 63.50 64.64 65.07 66.68 68.37 69.85 76.20 82.55 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17346F 8 REQUIREMENTS: D

15、esign and construction: See figure 1. Mates with plugs shown on MS17344. Dimensions shall be maintained when inserts are pressed firmly against indicated shoulder. For size 0 contacts only: Increase Z dimension by .312 (7.92 mm) for shell sizes 12 through 40, and increase Z dimension by .062 (1.57 m

16、m) for shell size 44. For size, insert arrangement, alternate position, contact size, spacing and service rating, see MIL-STD-1651. Shell finish: See MIL-DTL-22992. Class shall be designated by the letter C (pressurized), J (pressurized with grommet) or R (environmental resisting). Part or Identifyi

17、ng Number (PIN) example: MS17346 R 20 C 27 P W MS number Class Shell size Finish Insert arrangement Contact style Alternate position Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.

18、Referenced documents. In addition to MIL-DTL-22992, this document references the following: MS17344 MS17349 MIL-STD-1651 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17346F 9 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Nav

19、y EC Air Force 85 DLA CC Review activities: (Project 59352012183) Army AR, MI Navy AS, CG, MC, OS, YD Air Force 19 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-