DLA MS9287 REV A (1)-2003 BOLT MACHINE-STEEL AMS 6322 BLACK OXIDE HEXAGON HEAD 4375-20 UNJF-3A《AMS 6322型钢锚杆机的0 4375-20 UNJF-3A型六边黑色二极管》.pdf

《DLA MS9287 REV A (1)-2003 BOLT MACHINE-STEEL AMS 6322 BLACK OXIDE HEXAGON HEAD 4375-20 UNJF-3A《AMS 6322型钢锚杆机的0 4375-20 UNJF-3A型六边黑色二极管》.pdf》由会员分享，可在线阅读，更多相关《DLA MS9287 REV A (1)-2003 BOLT MACHINE-STEEL AMS 6322 BLACK OXIDE HEXAGON HEAD 4375-20 UNJF-3A《AMS 6322型钢锚杆机的0 4375-20 UNJF-3A型六边黑色二极管》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 MS9287A AMENDMENT 1 8 JULY 2003 MILITARY STANDARD BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD, .4375-20 UNJF-3A This amendment forms a part of MS9287A, date d 26 OCTOBER 1972, and is approved for use by all Departments and Agencies of the Department of Defense. PAGE 1 Bolt illustration

2、view at the right: Delete “MIL-S-8879” from “.4375-20 UNJF-3A SPEC MIL-S-8879” and substitute “AS8879”. For view A enlarged view: Add “(SEE NOTE 15)” after “.648 DIA MIN BEARING SURFACE”. Add the word “NOTES:” above note 1. Note 9: Delete “AMS 7452” and substitute “”AS7452”. Note 11: Delete “AS291”

3、and substitute “ASME B46.1”. Add new note: “15. BEARING SURFACE: BEARING SURFACE SHALL BE FLAT AND WASHER FACED. DIAMETER OF BEARING SURFACE SHALL BE EQUAL TO THE MAXIMUM WIDTH ACROSS FLATS WITHIN A TOLERANCE OF MINUS 10% IN ACCORDANCE WITH ASME B18.2.1.” Custodians: Preparing Activity: Navy - AS DLA-IS DLA - IS (Project 5306-2709) AMSC N/A FSC 5306 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-