DLA MIL-PRF-20 29 E-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING) ESTABLISHED AND NON-ESTABLISHED RELIABILITY STYLES CCR77 AND CC77.pdf

《DLA MIL-PRF-20 29 E-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING) ESTABLISHED AND NON-ESTABLISHED RELIABILITY STYLES CCR77 AND CC77.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-PRF-20 29 E-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING) ESTABLISHED AND NON-ESTABLISHED RELIABILITY STYLES CCR77 AND CC77.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 5910 MIL-PRF-20/29E 21 April 2011 SUPERSEDING MIL-PRF-20/29D 21 June 2001 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING), ESTABLISHED AND NON-ESTABLISHED RELIABILITY, STYLES CCR77 AND CC77 This specification is approved for use by all De

2、partments and Agencies of the Department of Defense. The requirements for acquiring the capacitors described herein shall consist of this specification sheet and MIL-PRF-20. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Lead diameter shall be .0

3、15 (0.38 mm) to .027 (0.69 mm). 4. Lead length may be a minimum of 1.00 inch (25.4 mm) long for use in tape and reel packaging, when specified in the ordering data. FIGURE 1. Styles CCR77 and CC77 capacitors. INCH-POUND CC77 is inactive for new design after 26 March 1984. Use CCR77 Inches mm .010 0.

4、25 .140 3.56 .390 9.91 1.250 31.75 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-20/29E 2 REQUIREMENTS: Dimensions and configuration: See figure 1. Lead type: Axial. Case type: Tubular, molded. DC rated voltage: See table I. Operating tempe

5、rature range: -55C to +125C. Characteristic: CG. Failure rate level (CCR77 only): M (1.0 percent), P (0.1 percent), R (0.01 percent) or S (0.001 percent). TABLE I. Capacitor characteristics. PIN 1/ 2/ Rated voltage (volts, dc) Nominal capacitance (pF) Capacitance tolerance PIN 1/ 2/ Rated voltage (v

6、olts, dc) Nominal capacitance (pF) Capacitance tolerance CC-77CG151- CC-77CG161- CC-77CG181- CC-77CG201- CC-77CG221- CC-77CG241- CC-77CG271- CC-77CG301- CC-77CG331- CC-77CG361- CC-77CG391- CC-77CG431- CC-77CG471- CC-77CG511- CC-77CG561- CC-77CG621- CC-77CG681- CC-77CG751- CC-77CG821- CC-77CG911- 200

7、 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ CC-77CG102- CC-77CG112- CC-77CG122- CC-77CG132- CC-77CG152- CC-77CG

8、162- CC-77CG182- CC-77CG202- CC-77CG222- CC-77CG242- CC-77CG272- CC-77CG302- CC-77CG332- CC-77CG362- CC-77CG392- CC-77CG432- CC-77CG472- CC-77CG512- CC-77CG562- 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3600 390

9、0 4300 4700 5100 5600 FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJ FGJK FGJK 1/ Complete PIN will include the following: 1st dash - Symbol “R” (for style CCR77) or dash will be deleted (for style CC77). 2nd dash - Applicable capacitance tolerance symbol. 3rd dash - Applicable

10、failure rate level symbol (CCR77 only) or dash will be deleted (for style CC77). 2/ Capacitors deleted since previous revisions shall be replaced by selecting a capacitor with the nearest parameter. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL

11、-PRF-20/29E 3 Thermal shock and voltage conditioning (CCR77 only): In accordance with MIL-PRF-20. Capacitance: Within tolerance specified (see table I). Dissipation factor: In accordance with MIL-PRF-20. Dielectric withstanding voltage: In accordance with MIL-PRF-20. Body insulation: Test II. Solder

12、ability: In accordance with MIL-PRF-20. Resistance to soldering heat: In accordance with MIL-PRF-20. Life: In accordance with MIL-PRF-20, operating condition 2. Part or Identifying Number (PIN): In accordance with MIL-PRF-20 and table I. Marking: Method I of MIL-STD-1285, as shown in the following e

13、xample: ER PIN CCR77C G151FM “J” brand and CAGE code J12345 Date code and lot code 1120A (lot code may require two characters) NON-ER PIN CC77C G151F CAGE code 12345 Date code and lot code 1120A (lot code may require two characters) Referenced documents. In addition to MIL-PRF-20, this specification

14、 sheet references the following document: MIL-STD-1285 Changes from previous issue: The margins of this specification sheet are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoev

15、er for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Provided by IHSNot for ResaleNo reproduction or networking p

16、ermitted without license from IHS-,-,-MIL-PRF-20/29E 4 Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force 85 (Project 5910-2011-013) DLA - CC Review activities: Navy - AS, MC, OS, SH Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-