DLA MIL-DTL-83723 74 F-2009 CONNECTORS ELECTRIC (CIRCULAR ENVIRONMENT RESISTING) RECEPTACLE (SINGLE HOLE MOUNT BAYONET COUPLING CRIMP PIN CONTACT) (SERIES III CLASSES A G M R T W A.pdf

《DLA MIL-DTL-83723 74 F-2009 CONNECTORS ELECTRIC (CIRCULAR ENVIRONMENT RESISTING) RECEPTACLE (SINGLE HOLE MOUNT BAYONET COUPLING CRIMP PIN CONTACT) (SERIES III CLASSES A G M R T W A.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-DTL-83723 74 F-2009 CONNECTORS ELECTRIC (CIRCULAR ENVIRONMENT RESISTING) RECEPTACLE (SINGLE HOLE MOUNT BAYONET COUPLING CRIMP PIN CONTACT) (SERIES III CLASSES A G M R T W A.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, BAYONET COUPLING, CRIMP PIN CONTACT), (SERIES III, CLASSES A, G, M, R, T, W AND Z) This specification is approved for use by all Departments and Agencies of the Department of Defense.

2、 The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83723. FIGURE 1. Dimensions and configurations. AMSC N/A FSC 5935 INCH-POUND MIL-DTL-83723/74F 19 August 2009 SUPERSEDING MIL-DTL-83723/74E 20 October 2000 Provided by IHSNot for Resale

3、No reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/74F 2 FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/74F 3 Shell size B C D max F max G N thread 8

4、.137 .097 .428 .433 .312 .561 .536 .531 .625-20 UN-2A 10 .137 .097 .530 .535 .388 .696 .659 .654 .750-20 UNEF-2A 12 .137 .097 .700 .705 .558 .875 .829 .824 .9375-20 UNEF-2A 14 .137 .097 .769 .774 .627 .935 .898 .893 1.000-20 UNEF-2A 16 .137 .097 .869 .901 .772 1.062 1.025 1.020 1.125-20 UNEF-2A 18 .

5、137 .097 1.002 1.007 .860 1.187 1.131 1.126 1.250-18 UNEF-2A 20 .137 .097 1.127 1.132 .985 1.312 1.256 1.251 1.375-18 UNEF-2A 22 .168 .128 1.252 1.257 1.110 1.437 1.381 1.376 1.500-18 UNEF-2A 24 .168 .128 1.377 1.382 1.235 1.562 1.506 1.501 1.625-18 UNEF-2A Shell size U V max S +.005 -.000 W max EE

6、FF JJ 8 .670 .979 .508 1.068 .605 .635 .596 .590 10 .796 1.104 .636 1.192 .730 .760 .721 .715 12 .984 1.291 .806 1.380 .917 .947 .908 .902 14 1.046 1.391 .875 1.505 .980 1.010 .971 .965 16 1.171 1.516 1.002 1.630 1.105 1.135 1.096 1.090 18 1.296 1.641 1.108 1.756 1.229 1.260 1.220 1.214 20 1.484 1.7

7、66 1.233 1.860 1.354 1.385 1.345 1.339 22 1.609 1.954 1.358 2.086 1.479 1.510 1.470 1.464 24 1.734 2.079 1.483 2.160 1.604 1.635 1.595 1.589 FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-

8、83723/74F 4 Inches mm Inches mm Inches mm Inches mm Inches mm .005 0.13 .211 5.36 .721 18.31 1.090 27.69 1.385 35.18 .008 0.20 .259 6.58 .730 18.54 1.096 27.84 1.391 35.33 .015 0.38 .312 7.92 .750 19.05 1.104 28.04 1.437 36.50 .018 0.46 .366 9.30 .760 19.30 1.105 28.07 1.455 36.96 .019 0.48 .376 9.5

9、5 .761 19.33 1.108 28.14 1.464 37.19 .020 0.51 .378 9.60 .769 19.53 1.110 28.19 1.470 37.34 .022 0.56 .380 9.65 .772 19.61 1.125 28.58 1.479 37.57 .032 0.81 .388 9.86 .774 19.66 1.127 28.63 1.483 37.67 .042 1.07 .392 9.96 .781 19.84 1.132 28.75 1.484 37.69 .046 1.17 .428 10.87 .796 20.22 1.135 28.83

10、 1.500 38.10 .062 1.57 .433 11.00 .806 20.47 1.171 29.74 1.510 38.35 .065 1.65 .461 11.71 .860 21.84 1.187 30.15 1.516 38.51 .069 1.75 .481 12.22 .875 22.23 1.192 30.28 1.562 39.67 .071 1.80 .490 12.45 .896 22.76 1.214 30.84 1.589 40.36 .076 1.93 .508 12.90 .901 22.89 1.220 30.99 1.595 40.51 .084 2.

11、13 .530 13.46 .902 22.91 1.229 31.22 1.604 40.74 .089 2.26 .535 13.59 .908 23.06 1.233 31.32 1.609 41.87 .090 2.29 .539 13.69 .917 23.29 1.235 31.37 1.625 41.28 .093 2.36 .540 13.72 .935 23.75 1.250 31.75 1.630 41.40 .094 2.39 .558 14.17 .9375 23.81 1.252 31.80 1.635 41.53 .097 2.46 .560 14.22 .947

12、24.05 1.257 31.93 1.641 41.68 .098 2.49 .561 14.25 .965 24.51 1.260 32.00 1.734 44.04 .101 2.57 .590 14.99 .971 24.66 1.291 32.79 1.756 44.60 .106 2.69 .596 15.14 .979 24.87 1.296 32.92 1.766 44.86 .109 2.77 .605 15.37 .980 24.89 1.300 33.02 1.860 47.24 .112 2.84 .625 15.88 .984 24.99 1.312 33.32 1.

13、954 49.63 .125 3.18 .627 15.93 .985 25.02 1.339 34.01 2.068 52.53 .128 3.25 .635 16.13 1.000 25.40 1.345 34.16 2.079 52.81 .137 3.48 .636 16.15 1.002 25.45 1.354 34.39 2.160 54.86 .138 3.51 .670 17.02 1.007 25.58 1.358 34.49 .144 3.66 .696 17.68 1.010 25.65 1.375 34.93 .168 4.27 .700 17.78 1.046 26.

14、57 1.377 34.98 .198 5.03 .705 17.91 1.062 26.97 1.380 35.05 .204 5.18 .715 18.16 1.068 27.13 1.382 35.10 FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/74F 5 NOTES: 1. Dimensions are

15、 in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerances are .005 (0.13 mm) for three place decimals and .01 (0.25 mm) for two place decimals, and 1 for all angles. 4. Rear accessory interchangeability dimensions shall be in accordance with

16、MIL-DTL-83723. 5. The centerline of indicated projection shall be located on vertical centerline 2. 6. See table I for contact cavities requiring this dimension. FIGURE 1. Dimensions and configurations - Continued. REQUIREMENTS: Dimensions and configuration: See figure 1. For insert arrangements, se

17、e MIL-STD-1554 and table I. TABLE I. Inserts requiring reduced diameters for raised seal barriers on contact cavities. Shell size Insert arrangements Contact cavities 8 10 03 06 1, 2, 3 1, 2, 3, 4, 5, 6 For connector accessories: See SAE-AS85049. This connector mates with MIL-DTL-83723/75 and /77. O

18、-ring shall be furnished with connector. Part or Identifying Number (PIN) example: M83723/ 74 R 22 55 N Military designator Specification sheet number Class Shell size Insert arrangement Polarizing position Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS

19、-,-,-MIL-DTL-83723/74F 6 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83723, this document references the following: MIL-DTL-83723/75

20、 MIL-DTL-83723/77 MIL-STD-1554 MS3186 SAE-AS85049 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA-CC Navy - AS Air Force - 85 (Project 5935-2008-127) DLA - CC Review activities: Army - AR, AV, MI Navy - EC Air Force - 19, 99 NOTE: The activities listed above were interested in this

21、 document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-