DLA MIL-DTL-3661 40 B-2008 LAMPHOLDERS INDICATOR LIGHTS INDICATOR-LIGHT HOUSINGS AND INDICATOR-LIGHT LENSES INDICATOR-LIGHT (NON-REMOVABLE) STYLE LHC82 (ELECTROMAGNETIC INTERFERENC.pdf

《DLA MIL-DTL-3661 40 B-2008 LAMPHOLDERS INDICATOR LIGHTS INDICATOR-LIGHT HOUSINGS AND INDICATOR-LIGHT LENSES INDICATOR-LIGHT (NON-REMOVABLE) STYLE LHC82 (ELECTROMAGNETIC INTERFERENC.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-DTL-3661 40 B-2008 LAMPHOLDERS INDICATOR LIGHTS INDICATOR-LIGHT HOUSINGS AND INDICATOR-LIGHT LENSES INDICATOR-LIGHT (NON-REMOVABLE) STYLE LHC82 (ELECTROMAGNETIC INTERFERENC.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 INCH-POUND INCH-POUND MIL-DTL-3661/40B 09 October 2008 SUPERSEDING MIL-L-3661/40A 14 July 1969 MILITARY SPECIFICATION SHEET LAMPHOLDERS, INDICATOR LIGHTS, INDICATOR-LIGHT HOUSINGS AND INDICATOR-LIGHT LENSES INDICATOR-LIGHT (NON-REMOVABLE), STYLE LHC82 (ELECTROMAGNETIC INTERFERENCE AND NON-ELECTROMA

2、GNETIC TYPES) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-3661. AMSC N/A FSC 6210 Provided by IHSNot for ResaleNo reproduction or

3、 networking permitted without license from IHS-,-,-MIL-DTL-3661/40B REQUIREMENTS: 1. Design and construction. See figure one. 2. Dielectric withstanding voltage: Sea level 500 Volts r.m.s. at 60Hz. 3. Bushing torque: 8 pound-inches. 4. Lamp (non-replaceable): MIL-DTL-6363/5 “Part number M6363/5-1AS1

4、5” 5. Shock: Method II 6. Wire leads shall be in accordance with SAE-AS22759/11. 7. Threaded stud case shall be fabricated from a corrosion-resistant steel. The finish is optional. 8. Weight: 0.005 pound maximum. 9. Marking: Type designation to be stamped on the wire or insulating sleeve. 10. If Ele

5、ctromagnetic Interference (EMI) shielded; case must be grounded. TABLE I. Conformance Inspection.Type Designation Tests MIL-DTL-3661 Extent of Approval LHC82 / 1YT2 LHC82 / 2YT2 (12 Sample units) All test of Table IV LHC82 / 1WT2 LHC82 / 1RT2 LHC82 / 1GT2 LHC82 / 1BT2 LHC82 / 1CN2 LHC82 / 2WT2 LHC82

6、 / 2RT2 LHC82 / 2GT2 LHC82 / 2BT2 LHC82 / 2CN2 (2 Sample units each) Group I of Table IV (visual and mechanical examination only) ALL TABLE II. Type Designation.2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3661/40B Type Designation Lens

7、Material Electromagnetic Interference(EMI) Transmittance Lens Color LHC82 / 1WT2 Plastic Not EMI* Translucent White LHC82 / 1RT2 Plastic Not EMI* Translucent Red LHC82 / 1GT2 Plastic Not EMI* Translucent Green LHC82 / 1BT2 Plastic Not EMI* Translucent Blue LHC82 / 1YT2 Plastic Not EMI* Translucent Y

8、ellow LHC82 / 1CN2 Plastic Not EMI* Nondiffusing Colorless LHC82 / 2WT2 Plastic EMI* Translucent White LHC82 / 2RT2 Plastic EMI* Translucent Red LHC82 / 2GT2 Plastic EMI* Translucent Green LHC82 / 2BT2 Plastic EMI* Translucent Blue LHC82 / 2YT2 Plastic EMI* Translucent Yellow LHC82 / 2CN2 Plastic EM

9、I* Nondiffusing Colorless * Not Electromagnetic Interference shielded. * Electromagnetic Interference shielded. Case must be grounded. CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes

10、. Custodians: Preparing Activity: Army - CR Navy - AS Air Force - 99 DLA GS-2 (Project 6210-2008-008) Review Activities: Army CR4, MI Navy - MC Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at http:/assist.daps.dla.mil/. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-