DLA MIL-DTL-15098 10 D-2010 LAMPS GLOW INDICATOR TYPES B1A B1AR B2A AND B2AR.pdf

《DLA MIL-DTL-15098 10 D-2010 LAMPS GLOW INDICATOR TYPES B1A B1AR B2A AND B2AR.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-DTL-15098 10 D-2010 LAMPS GLOW INDICATOR TYPES B1A B1AR B2A AND B2AR.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 6240 INCH-POUND MIL-DTL-15098/10D 23 August 2010 SUPERSEDING MIL-L-15098/10C 22 August 1983 DETAIL SPECIFICATION SHEET LAMPS, GLOW, INDICATOR, TYPES B1A, B1AR, B2A, AND B2AR This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirem

2、ents for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-15098, “Lamps, Glow, General Specification for“. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only and are based upon 1 inch = 25.4 mm. FIGURE 1. Indic

3、ator glow lamp, types B1A, B1AR, B2A, and B2AR. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15098/10D 2 REQUIREMENTS: Design and configuration: See figure 1 and table I. Vibration: Applicable when glow lamps with in-base resistors are spe

4、cified. Shock: Method II of MIL-DTL-15098. Part number: M15098/10 - (Dash number from table I). In-base resistors: Shall be determined by adding “R“ to the corresponding dash number. TABLE I. Dash numbers and characteristics. Dash no. Characteristic 001 001R 002 002R Bulb shape and size T 3-1/4 T 3-

5、1/4 T 3-1/4 T 3-1/4 Maximum overall length (inch) 1.188 1.188 1.188 1.188 Base MB MB MB MB Electrode shape W11 W11 W11 W11 Electrode length (millimeter, nominal) 9 9 9 9 Distance from end of electrode to end of bulb 0.094 0.094 0.094 0.094 Series resistor Ohms 220,000 220,000 47,000 47,000 Location

6、External In base External In base Characteristic gas Neon Neon Neon Neon Glow color Red Red Red Red Watts (nominal) 0.04 0.04 0.142 0.142 Application Indicator Indicator Indicator Indicator Brightness Standard Standard High High Nominal circuit voltage (volts) 120 AC 120 AC 120 AC, 150 DC 120 AC, 15

7、0 DC Maximum initial starting voltage (volts) In light (DC) 90 90 135 135 In light (AC) 65 65 95 95 Design current (milliamperes) 0.3 0.3 1.2 1.2 Initial light output (lumens) 0.015 0.015 0.090 0.090 Average life at design current (hours) 10,000 10,000 20,000 20,000 Industry number ANSI B1A B1AR B2A

8、 B2AR Former industry number NE-51 NE-51-R NE-51H NE-51H-R CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted witho

9、ut license from IHS-,-,-MIL-DTL-15098/10D 3 Custodians: Preparing Activity: Army - CR Navy - SH Air Force - 99 DLA - GS DLA - GS2 (Project 6240-2010-012) Review Activities: Army - AR, CR4, MI Navy - AS, CG, MC Air Force - 71 DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-