DLA A-A-59894-2012 ARMY MOUNTAINEERING KIT VISUAL USER扴 GUIDE REPLACEMENT KIT.pdf

《DLA A-A-59894-2012 ARMY MOUNTAINEERING KIT VISUAL USER扴 GUIDE REPLACEMENT KIT.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-59894-2012 ARMY MOUNTAINEERING KIT VISUAL USER扴 GUIDE REPLACEMENT KIT.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 AMSC N/A FSC 8465 A-A-59894 5 September, 2012 COMMERCIAL ITEM DESCRIPTION ARMY MOUNTAINEERING KIT, VISUAL USERS GUIDE REPLACEMENT KIT The General Services Administration has authorized the use of this Commercial Item Description for all Federal agencies. 1. SCOPE. This Commercial Item Description (

2、CID) covers the requirements for a kit that replaces the Visual Users Guides found in all the Army Mountaineering Kits (AMK). It will provide a user the instructions necessary to perform the same tasks as Soldiers who are issued the Army Mountaineering Kits (AMKs). 2. CLASSIFICATION. The Army Mounta

3、ineering Kits (AMK) Visual Users Guides (VUG) Replacement Kit will be furnished as one kit. 3. SALIENT CHARACTERISTICS. The kit shall be composed of the following items in the following quantities as listed in Table I: TABLE I. List of items in kit Comments, suggestions, or questions on this documen

4、t should be addressed to: Attn: DLA Troop Support, Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information using Acquisition Streamlining and Standardization Information System (ASSIS

5、T) online database at https:/assist.dla.mil. Item Name Color Quantity Visual Users Guide, High Angle Mountaineering Kit color 1 Visual Users Guide, Assault Climber Team Kit color 1 Visual Users Guide, Snow and Ice Mobility Kit color 1 Visual Users Guide, Mountain Operations color 1 Carabiner-Non Loc

6、king color 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59894 2 3.1 Dimensions. Individual item dimensions will be in accordance with drawings and specification requirements specified in the applicable CID document (see Table I) unles

7、s item is a manufacturers part number/cage code then, in which manufacturers current specifications apply. 3.2 Color. Individual item colors will be in accordance with applicable specifications (see Table I). 3.3 End item testing. Individual item test standards will be in accordance with their relat

8、ed International Climbing and Mountaineering Federation Standards, where applicable. 3.4 Materials. Individual item materials will be in accordance with applicable specifications (See Table I). 3.5 Workmanship. The Army Mountaineering Kits (AMK) Visual Users Guides (VUG) Replacement Kit shall confor

9、m to the quality of product established by this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The Army Mountaineering Kits (

10、AMK) Visual Users Guides (VUG) Replacement Kit shall have no unexpected material or component failures during a continuous one-year cycle. The Army Mountaineering Kits (AMK) Visual Users Guides (VUG) Replacement Kit shall have no unexpected material or component failures during periodic use over a f

11、ive year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Army Mountaineering Kit shall have identification label Class 5 conforming to Type VI o

12、f MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the printing for the identification label: ARMY MOUNTAINEERING KIT VISUAL USERS GUIDE REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be supplied: a. The

13、 name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the product d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of

14、chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than one model is available Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59894 3 4. REGULATORY REQUIREMENTS. The offer

15、or/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials sh

16、ould be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient char

17、acteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. 5.2 End

18、item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract

19、 or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at

20、https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 20

21、2-512-1800. 7.2 Ordering data. The contract or order should specify the following: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59894 4 a. Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and i

22、nstruction slip (see 3.7) c. Acceptance criteria (see 5.3) d. Packaging (see 6.1) 7.2 National Stock Numbers (NSNs). NSN TYPE ITEM 8465-01-578-8906 X Carabiner-Non Locking 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING A

23、CTIVITY: DLA-CT Project Number: 8465-2012-003 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-