DLA A-A-59886 2 A-2011 CIRCUIT BREAKERS MINIATURE THERMAL MAGNETIC SHOCK ENHANCED TRIP-FREE SERIES TRIP HIGH DENSITY DESIGN 35 MM DIN CHANNEL MOUNT TWO POLE 0 2 TO 30 AMPERES (A).pdf

《DLA A-A-59886 2 A-2011 CIRCUIT BREAKERS MINIATURE THERMAL MAGNETIC SHOCK ENHANCED TRIP-FREE SERIES TRIP HIGH DENSITY DESIGN 35 MM DIN CHANNEL MOUNT TWO POLE 0 2 TO 30 AMPERES (A).pdf》由会员分享，可在线阅读，更多相关《DLA A-A-59886 2 A-2011 CIRCUIT BREAKERS MINIATURE THERMAL MAGNETIC SHOCK ENHANCED TRIP-FREE SERIES TRIP HIGH DENSITY DESIGN 35 MM DIN CHANNEL MOUNT TWO POLE 0 2 TO 30 AMPERES (A).pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 5925 INCH-POUND A-A-59886/2A 27 October 2011 SUPERSEDING A-A-59886/2 12 August 2011 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET CIRCUIT BREAKERS, MINIATURE, THERMAL MAGNETIC, SHOCK ENHANCED, TRIP-FREE, SERIES TRIP, HIGH DENSITY DESIGN, 35 MM DIN CHANNEL MOUNT, TWO POLE, 0.2 TO 30 AM

2、PERES (A) The General Services Administration has authorized the use of this commercial item description (CID) for all federal agencies. The complete requirements for procuring the circuit breakers described herein shall consist of this document and the issue in effect of CID A-A-59886. CLASSIFICATI

3、ON/PART OR IDENTIFICATION NUMBER (PIN). This commercial item description (CID) specification sheet uses a classification system which is included in the PIN as shown in the following example (see NOTES). AA59886 /02 - 001 A CID number Applicable CID specification sheet (two digits) Current rating (s

4、ee table I) (A) Auxiliary contacts Blank for no auxiliary contacts. SALIENT CHARACTERISTICS. Interface and physical dimensions. Circuit breakers supplied to this CID specification sheet shall be as specified herein and shall meet the requirements of UL 1077 and CSA C22.2 Number 235 for supplementary

5、 protectors and EN/IEC 60934 for circuit breakers for equipment (CBE) (see figure 1). Maximum voltage and frequency rating. The maximum voltage and frequency rating shall be 480 V ac/ 277 V ac at 50/60 Hertz, 65 V dc. Current rating. The current rating shall be in accordance with table I. Calibratio

6、n (Time delay). Calibration (time delay) shall be in accordance with table II. Temperature range. The temperature range shall be -40F to 149F (-40C to 65C) non-condensing. Operating life. The operating life shall be 6000 operations at rated current. Housing material. The housing material shall be gl

7、ass-filled Polyamide 6.6. Shock. The shock shall be 25 G, 11 ms duration. Terminal type. The terminal type shall be tubular screw with self-lifting box lug. Wire size. The wire size shall be number 22 to number 10 AWG. Provided by IHSNot for ResaleNo reproduction or networking permitted without lice

8、nse from IHS-,-,-A-A-59886/2A 2 Ltr Inches mm Min Max Min Max A 3.475 3.485 88.27 88.52 B 3.145 3.155 80.01 80.14 C 3.475 3.485 88.27 88.52 D 0.405 0.415 10.29 10.54 E 0.505 0.515 12.83 13.08 F 0.485 0.495 12.32 12.57 G 0.975 0.985 24.77 25.02 NOTES: 1. Dimensions are in inches. 2. Metric equivalent

9、s are given for general information only. 3. Unless otherwise specified, tolerance is .005 (0.13 mm). FIGURE 1. Interface and physical dimensions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59886/2A 3 TABLE I. PIN dash number parameters. CID

10、 dash number AA59886/02- Current rating (Amperes) CID dash number AA59886/02- Current rating (Amperes) 001 0.2 011 5.0 002 0.5 012 6.0 003 0.8 013 7.0 004 1.0 014 8.0 005 1.2 015 10.0 006 1.5 016 12.0 007 2.0 017 15.0 008 2.5 018 16.0 009 3.0 019 20.0 010 4.0 020 25.0 TABLE II. Calibration (time del

11、ay) in seconds. Tripping-time delay at +21.1C (70F) (tripping time in seconds) Time delay Percent rated current 100 percent 200 percent 300 percent 400 percent Tripping times (seconds) Max Min Max Min Max Min Max Min No trip 40 10 18 3 9 1.5 Time delay Percent rated current 500 percent 600 percent 1

12、000 percent 2000 percent greater Tripping times (seconds) Max Min Max Min Max Min Max Min 6 0.8 4 0.003 2 0.009 0.02 n/a Recommended wire strip length. The recommended wire strip length shall be .51 inch (13 mm) for the main terminal and .41 inch (10.4 mm) for the auxiliary terminal. Terminal torque

13、. 0.656 Newton meters (N m) (5 pounds (lb) inch) Auxiliary contacts (N.O. or N.C.). Contact capacity shall be 1.0 amperes ac or dc (Resistive load). NOTES. PIN. The PIN should be used for Government purposes to buy commercial products to this CID specification sheet. See the classification informati

14、on for PIN format example. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59886/2A 4 Source of documents. Non Government Publications CANADIAN STANDARDS ASSOCIATION (CSA) CSA C22.2 NO 235 - Supplementary Protectors. (Copies of this document is a

15、vailable online at http:/www.csa.ca/ or from the Canadian Standards Association, 8501 East Pleasant Valley Road, Cleveland, Ohio 44131-5575.) INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) EN/IEC 60934 - Circuit Breakers for Equipment (CBE). (Copies of this document is available online at http:/www

16、.iec.ch/ or from the International Electrotechnical Commission , 333 Pfingsten Road, Northbrook, IL 60062-2096.) UNDERWRITERS LABORATORIES, INCORPORATED (UL) UL 1077 - Supplementary Protectors for Use in Electrical Equipment, Standard For Safety. (Copies of this document is available online at http:

17、/ or from the Underwriters Laboratories, Incorporated, 333 Pfingsten Road, Northbrook, IL 60062-2096.) (Industry association specifications and standards are generally available for reference from libraries. They are also distributed among technical groups and using Federal agencies.) Commercial pro

18、ducts. As part of the market analysis and research effort, this CID specification sheet was coordinated with the following manufacturers of commercial products. At the time of CID specification sheet preparation and coordination, these manufacturers were known to have commercial products that would

19、meet the requirements of this CID specification sheet. (NOTE: This information should not be considered as a list of approved manufacturers or be used to restrict acquisition to only the manufacturers shown.) MFRs CAGE MFRs name and address 4H047 Rockwell Automation, Incorporated 1 Allen-Bradley Dri

20、ve Mayfield Heights, OH 44124-6118 Phone number: (440) 646-5000 Facsimile number: (440) 646-3138 E-mail: RAG Uniform Resource Locator (URL): Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59886/2A 5 Part number (P/N) supersession data. These CI

21、D specification sheet PINs supersede the following MFRs P/Ns as shown. This information is being provided to assist in reducing proliferation in the Government inventory system. TABLE I. P/N supersession data. CID dash number (see table I) AA59886/02- MFRs CAGE 4H047 CID dash number (see table I) AA

22、59886/02- MFRs CAGE 4H047 MFRs P/N 1/ MFRs P/N 1/ 001 1492-GS2G002 001A 1492-GS2G002H1 002 1492-GS2G005 002A 1492-GS2G005H1 003 1492-GS2G008 003A 1492-GS2G008H1 004 1492-GS2G010 004A 1492-GS2G010H1 005 1492-GS2G012 005A 1492-GS2G012H1 006 1492-GS2G015 006A 1492-GS2G015H1 007 1492-GS2G020 007A 1492-G

23、S2G020H1 008 1492-GS2G025 008A 1492-GS2G025H1 009 1492-GS2G030 009A 1492-GS2G030H1 010 1492-GS2G040 010A 1492-GS2G040H1 011 1492-GS2G050 011A 1492-GS2G050H1 012 1492-GS2G060 012A 1492-GS2G060H1 013 1492-GS2G070 013A 1492-GS2G070H1 014 1492-GS2G080 014A 1492-GS2G080H1 015 1492-GS2G100 015A 1492-GS2G1

24、00H1 016 1492-GS2G120 016A 1492-GS2G120H1 017 1492-GS2G150 017A 1492-GS2G150H1 018 1492-GS2G160 018A 1492-GS2G160H1 019 1492-GS2G200 019A 1492-GS2G200H1 020 1492-GS2G250 020A 1492-GS2G250H1 1/ The manufacturers P/N shall not be used for acquisition to the requirements of this CID. At the time of pre

25、paration of this CID, the aforementioned commercial products were reviewed and could be replaced by the CID P/N shown. For actual part marking requirements see the marking paragraph of A-A-59886. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59

26、886/2A 6 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - FAS Custodians: Navy - EC Preparing activity: DLA - CC DLA-CC Project 5925-2012-002 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-