DLA A-A-55132-1992 LIGHT CHEMILUMINESCENT 6-IN - 30 MIN E F《6-IN - 30 MIN E F化学发光灯》.pdf

《DLA A-A-55132-1992 LIGHT CHEMILUMINESCENT 6-IN - 30 MIN E F《6-IN - 30 MIN E F化学发光灯》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-55132-1992 LIGHT CHEMILUMINESCENT 6-IN - 30 MIN E F《6-IN - 30 MIN E F化学发光灯》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-55132 = 9999974 0120824 464 I INCH-POUND I A-A-55 132 December 10, 1992 COMMERCIAL ITEM DESCRIPTION LIGHT, CHEMILUMINESCENT, 6-IN - 30 MIN E, F The General Services Administration has authorized the use of this commercial item description. Abstract. This description covers 30 minute 6 inch chemi

2、luminescent lights (commonly known as a light wand) used for a variety of lighting, marking, and identification purposes. Salient characteristics. 1. Color. The colors of the chemiluminescent light described in this CID are yellow and red. The color wand required shall be identified in- the Part Ide

3、ntification Number (PIN) paragraph of this CID. Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be sent to: Commander, Space and Naval Warfare Command, ATTN: SPAWAR 003-114/031, Washington, DC 20363. AMSC N/A FSC 6

4、260 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Licensed by Information Handling ServicesA-A-55132 9999974 0120825 3TO m A-A-55 13 2 2. Desisn. The chemiluminescent light shall be elongated having an overall length of 6 inches plus 0,043 minus 0.375 inches. poin

5、t diameter shall be no less than .500 inches and the wand shall have a flat base on one end. The diameter of the flat end shall not exceed -750 inches. The end opposite the flat base shall have a hole .188 inches nominal. Lightsticks shall have a tapered shape and shall be compatible with the follow

6、ing accessory items; Lightstick Shield (NSN 6260-01-196-0637), Ground Stake (NSN 6260-01-230-8555), Flare, Surface Trip (NSN 6260-01-247-2937), Handle, six (6) inch (NSN 6260-01-255-3345), and Magnetic Base (NSN 6260-01-255-3346). Lightsticks shall be individually wrapped in an airtight foil wrapper

7、. Commercial Item Description shall produce a level of light intensity as specified in Table I for a specified length of time (30 minutes). The mid 3. Interior. The chemiluminescent lights specified in this 4. Material Safety Data Sheet. Manufacturer shall provide evidence in the form of a Material

8、Safety Data Sheet (MSDS) (Fed-Std-313) that the components shall not be highly toxic, toxic, corrosive or irritant in terms of the definitions and tests in Code of Federal Regulations, Title 16, Part 1500 (Federal Hazardous Substances Act). 5. Test criteria. Illuminance must meet or exceed the data

9、presented in Table I. The integrated luminance over 15 minutes starting 5 seconds after activation measured at 75 degrees F on lightsticks a minimum of 30 days after manufacture, but not more than 90 days, must meet or exceed: Color E (red) 7.89 foot lambert-hours Color F (yellow) 32.40 foot lambert

10、-hours After Ageing Test, illuminance must meet or exceed data in Table II. Activated by manually flexing the plastic tube, breaking the inner vial and shaking to combine components. Plastic tube shall not leak and vial will not break when subjected to an external pressure equivalent to 30,000 feet

11、at 75 degrees F in a vacuum chamber. Must withstand, while in wrapper, a free fall from a height of 8.5 feet on a hard surface (concrete) without activating or leakage. 6. Test conditions. a. Meter: Digital Photometer, TEKTRONIX, Model J16, Sensor Probe J6501. All meters traceable to NIST. b. Wand t

12、o Meter Distance: 1.50 inches 5 0.02 inches. c. Temperature stabilization: Wands while still in sealed foil wrappers, will be placed in a water bath at test temperature for a minimum of one (1) hour before activation for the 75 F test temperature and for a minimum of two (2) hours for the 32 F test

13、temperature. d. activation. Remove wand from sealed foil wrapper immediately before O Light wand shall be handled by cap end during testing. 2 Licensed by Information Handling ServicesA-Am55132 m 9999974 OL2082b 237 m A-A-55 13 2 e. Activation method: Bend; agitate for ten (10) seconds. f. Wands sha

14、ll be agitated for ten (10) seconds before each reading . light during movement to and from light meter. O g. Wands kept under cover or in darkness; may be exposed to h. All meter readings made in darkness. i. Meter kept at 75 degrees F for all tests. j. Temperature tolerances: plus or minus 2 F. k.

15、 Holder, wand test fixture in accordance with DGSC drawing, DGSCV-91-03, Part Number 3. (Enclosure 1) 1. Chemiluminescent lights shall be held in a vertical position with cap end down when light output measurement is made. m. Ageing Test - test conditions to be added at a future date. Contractor cer

16、tification. The contractor shall certify, and maintain objective quality evidence that the product offered to the Government meets the salient characteristics of this description and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices a

17、nd is the same produced as the manufacturers current product offered by the contractor in the commercial marketplace for at least one year preceding the solicitation. require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the

18、 contract. The Government reserves the right to Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of

19、Federal Standard No. 376, and all other requirements of this Commercial Item Description are met. dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. accepting or rejecting the product. If

20、a product is manufactured to metric dimensions and those The contracting officer has the option of 3 Licensed by Information Handling ServicesA-A-55132 = 9999974 0320827 373 A-A-55 132 wmm om0 ma)ONN(vwa) o emme *ma) et- .m z OH QI rl (v O 4 mm mw *w O. rlrl t-o mw *m cc* do a) a) m z c V)H ow m. .o

21、 4N ln eo ea) Oe . VI W H O Z VI 0: W 0: 3 H V li O H nn ma VW . d a bV VIW ww E8 M (Y +I +I V ti VI VIW 0:a OW d( m(Y cc 0: HOU WB wn n %W WVI2 HWO vww ZWd 3ptn na on m +iw vhl +I wv oaw HW a0: VIWO HWW WO HWO w0:n n 4:s . cy Q, 4 m n c O 4 m 4 ? 2 k I Y 3 ti m m Y a al a a 4 91 a O 4 4 m m n Q, rl

22、 lQ E.i m 4 Licensed by Information Handling ServicesA-A-55132 m 9999974 O120828 OOT m A-A- 55132 5 G I t O I I 5 Enclosure 1 Licensed by Information Handling ServicesA-A-55132 m 9999974 0120829 T46 m I A-A-5 5 132 Resulatorv reauirements. The offeror/contractor is encouraged to use recovered materi

23、als in accordance with Public Law 94-580 to the maximum extent practicable. Qualitv assurance. Foil leakaqe. Samples will be tested for foil leakage by application of 6 psi air pressure into the inside of the foil wrap while submerged under water. from any portion of the foil, except where the foil

24、has been penetrated by the air supply shall be classified as an airtight foil A steady stream of air bubbles coming . failure. Shelf life. Each chemiluminescent light shall have a minimum of 46- months life remaining at the time of delivery to the Government and must have been manufactured within 6

25、months of the date of delivery to the Government. Fluid Level. The vertical fluid level, when measured from the exterior of the flat base shall be no less than 3 1/4 inches. Preservation, packaqinq, r, ackinq, labelins, and markinq. The preservation, packaging, packing, labeling, and marking shall b

26、e as specified in the contract or order. Foil wrapping and all other packaging shall be marked with manufacturers lot number and expiration date. Foil wrapping shall be color coded and contain operating instructions. CID based Part Identification Number. The following Part Identification Numbering p

27、rocedure is for Government purposes and does not constitute a requirement for the contractor. A-A-55132-X E=RED F-YELLOW 6 Licensed by Information Handling ServicesA-A-55132 = 9999974 0320830 768 A-A-55 1 3 2 Notes . Orderinq data. Acquisition documents must specify the following: a. Title, number,

28、part identification number with applicable color code letter, and date of this document. b. Material Safety Data Sheet (MSDS) shall be provided to Contracting Officer prior to award (FAR 52.223-3 and MSDS Page 2). c. Contracting Officer may request proof of certification of commercial item prior to

29、first contract delivery (See Contractor Certification, Page 3). MILITARY INTEREST: MILITARY COORDINATING ACTIVITY: Custodians Navy-EC Air Force-99 Reviewins Activities DLA-GS User Activities Navy-YD CIVIL AGENCY COORDINATING ACTIVITY: GSA-FSS PREPARING ACTIVITY: Navy-EC AGENT: DLA-GS PROJECT NO. 6260-1062 FSC 6260 7 Licensed by Information Handling Services