DIN ISO 4783-2-1996 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 2 Preferred combinations for woven wir.pdf

《DIN ISO 4783-2-1996 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 2 Preferred combinations for woven wir.pdf》由会员分享，可在线阅读，更多相关《DIN ISO 4783-2-1996 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 2 Preferred combinations for woven wir.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、DEUTSCHE NORM October 1996 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - I IS0 4783-2 I Part 2: Preferred combinations for woven wire cloth (IS0 4783-2 : 19891 ICs 19.120 Supersedes March 1995 edition. Drahtgewebe und Drahtgitter

2、 fr industrielle Zwecke - Leitfaden zur Auswahl von Kombinationen aus Maschenweite und Drahtdurchmesser - Teil 2: Vorzugskombinationen fr Drahtgewebe (IS0 4783-2 : 1989) This standard incorporates International Standard IS0 4783-2 Industrial wire screens and woven wire cloth - Guide to the choice of

3、 aperture size and wire diameter combinations - Part 2: Preferred combinations for woven wire cloth. A comma is used as the decimal marker. National foreword This standard has been prepared by ISO/TC 24. The responsible German body involved in its preparation was the Normenausschuss Siebbden und Kor

4、n- messung (Sieve Analysis Standards Committee), Technical Committee Drahfsiebbden. Amendments As compared to the March 1995 edition, a printing error has been corrected. Previous editions DIN 41 89-1 : 1953-1 1, 1968-02; DIN IS0 4783-2: 1995-03. IS0 Standard comprises 7 pages. No pari of this stand

5、ard may be reproduced without the prior permission of Y Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, s the exclusive right of sale for German Standards (DIN-Normen). Ref. No. DIN IS0 4783-2 : 1996-1 English price group 07 Sales No. 0407 08.00 Page 1 IS0 4783

6、-2 : 1989 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations Part 2: Preferred combinations for woven wire cloth Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (I

7、S0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical Committee has been established has the right to be represented on that committee. International organizations, gov

8、ern- mental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to

9、 the member bodies for approval before their acceptance as International Standards by the IS0 Council. They are approved in accordance with IS0 procedures requiring at least 75 % approval by the member bodies voting. International Standard IS0 4783-2 was prepared by Technical Committee ISO/TC 24, Si

10、eves, sieving and other sizing methods. This second edition cancels and replaces the first edition (IS0 4783-2 : 19811, of which it constitutes a minor revision. IS0 4783 consists of the following parts, under the general title Industrial wire screens and woven wire cloth - Guide to the choice of ap

11、erture size and wire diameter combi- nations : - Part 1 : Generalities - Part 2: Preferred combinations for woven wire cloth - Part 3: Preferred cornbinations for pre-crimped or pressure-welded wire screens 1 Scope This part of IS0 4783 tabulates preferred combinations of aper- ture size and wire di

12、ameter for industrial woven wire cloth which are taken from the general list of aperturelwire combi- nations given in IS0 4783-1. It applies to woven wire cloth of aperture size from 16 mm to 0.02 mm. NOTE - This is the first International Standard on woven wire cloth for industrial purposes; these

13、specifications are a compromise which takes account of existing national standards. IC0 Member Bodies are earnestly requested to rationalize further in order to reduce the number of wire diameters per aperture width within the next five years without excluding the option of increasing the number of

14、preferred apertures. IS0 4783-3 gives the preferred combinations for pre-crimped or pressure-welded wire screens. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of IS0 4783. At the time of publication, the e

15、ditions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of IS0 4783 are encouraged to investigate the possibility of applying the most recent editions of the standards listed below. Members of IEC and IS0 main- tain registers of currently val

16、id International Standards. IS0 3 : 1973, Preferred numbers - Series of preferrednumbers. IS0 497 : 1973, Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers. IS0 2194 : 1972, Wire screens and plate screens for industrial purposes - No

17、minal sizes of apertures. IS0 4782 : 1987, Metal wire for industrial wire screens and woven wire cloth. Page 2 IS0 4783-2 : 1989 3 Designation Woven wire cloth for industrial purposes shall be designated in the following sequence by a) width of aperture w; b) diameter of wire d; c) material of wire;

18、 d) type of weave bee figure 2). w = width of aperture wire Figure 1 - Width of aperture and diameter of wire 4 Aperture size and wire diameter combinations Table 1 lists the preferred combinations of aperture size and wire diameter for woven wire cloth and states the open area A, and the mass per s

19、quare metre, ea, for each combination. - Plain weave Twilled weave Figure 2 - Types of weave Page 3 IS0 4783-2 : 1989 Width R 10 mm 16 W 12,5 10 Table 1 - Preferred aperture size and wire diameter combinations of aperture R20 mm 16 W 14 12,5 11.2 10 9 Mascl) per unit area A kg/m2 1 .% 2.31 2.82 3.49

20、 6.58 8,19 1 .Q 2m 39 5.93 622 1.44 2.31 2.88 3.50 4.31 6.51 1.29 1,s 1 .= 3.17 335 4.74 5.79 7,11 8.78 10.58 acs1) pe unit area A kgf d 1s 2.38 2,93 3,74 4.62 533 4x44 12.80 1,14 1,74 2,15 2.23 5,m 6,12 7.46 9,02 10.94 13,34 1.01 1,27 1.58 2.37 2.93 3,s 4.52 5.56 8.13 1.12 1,74 2,12 3.18 3.89 4.93

21、6.05 7.26 8,3 10,58 12.77 Open area 90 83 81 79 77 70 67 83 79 74 69 68 83 79 76 74 72 67 Ao Width of aperture Diameter of wire d mm 0,900 1.12 1.25 1 1.60 1.80 2.00 1,80 3.15 0,800 1 SQ 1,12 1,40 1 2,00 2.24 2,s 2.80 3,15 0,710 0,800 0,900 1,12 1.25 1 1.60 1 .80 2,24 0,710 0.900 1 .o0 1.25 1 ,a 1.6

22、0 1.80 2-00 2,24 2.50 2.80 0,900 1.25 1.40 1,60 1.80 2.00 2,24 2.50 2,80 0.630 0,800 0,900 1 ,o0 1.12 1.25 1 .40 1 .N 2.00 2.24 Open area Ao % 79 75 72 70 67 64 61 62 46 79 74 72 67 60 58 54 51 48 44 79 77 74 69 67 64 60 57 51 77 72 69 64 61 57 54 51 48 44 41 Diameter of wire d mm 1.60 1 .N 2.00 2,2

23、4 3.15 355 1 1,N 2,24 2,80 2,80 1,25 1,60 1,80 2,043 2.24 2,80 3 4013 mm W 3 4013 mm 16 W - R20 mm 7.1 W - _ 13,2 - 11.2 83 81 79 74 72 69 67 64 61 57 81 77 74 72 69 64 1.43 2.18 2,80 3.49 4.23 6,35 9.5 - - 8 - 76 71 68 65 63 60 56 53 2.28 3,64 4.42 5,43 6.61 8.09 9.96 12.27 1,40 1,80 2,00 2.24 2,50

24、 2.80 3.15 3.55 1.00 1,25 1.40 1.60 1 .80 2,24 1 .o0 1.25 1.40 1,60 1.80 2,oo 2,24 2,50 2,80 1 .e 3,31 4.05 5.12 6.28 7.53 9.12 10,95 13.19 71 63 60 56 53 50 46 43 40 77 72 69 67 64 61 58 54 51 48 45 1.27 1,94 2.39 3.07 3,81 5.67 1,41 2.15 2/35 339 4.20 5,08 622 7.56 9.22 81 77 75 73 69 64 79 75 72

25、69 67 64 61 58 55 0.98 1.53 1,91 2.31 2.83 3.45 4.22 523 6.53 7.82 9,46 1) For plain steel wire, e = 7 850 kg/m3 (see clause 5). Page 4 IS0 4783-2 : 1989 77 75 72 67 64 61 58 55 77 75 72 67 64 61 58 55 73 62 53 77 74 72 67 64 60 54 51 Table 1 - Preferred aperture size and wire diameter combinations

26、(continued) 0,87 1 ,o9 1.36 2,lO 2854 3,11 3,7% 4,61 0,78 0,97 1,21 1.87 2.31 2,79 3,41 4,13 1,02 2,42 4,31 0,71 0,87 1 ,O7 1,66 2,05 2.54 3,73 4,51 Wid I R10 W Ure 3 401 mm W Open Mass) per area I unit area Width of aperture Mass) pei unit area k?d O, 60 0,85 1.56 1.92 23 3.55 4,23 6.11 9,03 0,60 0

27、,74 0,92 13 2.07 3,13 0.97 2,16 3.25 5,65 8.03 0.53 0,5 0.82 1.25 1,51 1 .a 2.26 2#77 33 438 0.4 0.73 1.39 2.03 2.48 3.03 4.47 7.49 0.53 0.65 0.81 1.23 1.81 2.20 2, 3.96 1.58 2.78 4.11 533 0.58 0.88 1 .o9 1.34 1.64 2.37 5.64 Diameter of wire d mm 0,315 0,400 0,560 0,630 0,710 0.900 1 ,o0 1.25 1 0,31

28、5 0,355 0.400 0,500 0.560 0.630 0,800 0.400 0,630 0.800 1.12 1.40 0,280 0,315 0,355 0,450 0,500 0.560 0,630 0,710 0.800 1 ,00 0,250 0,315 0,450 0,560 0,630 0,710 0,900 1,25 0,250 0,280 0,315 0.400 0,500 0,560 0,630 0,800 0,450 0,630 0,800 1 ,00 0,250 0,315 0,355 0.400 0.450 0,560 Open area % 74 69 6

29、1 58 54 48 44 38 31 72 70 67 61 58 55 48 66 53 46 36 30 72 70 67 61 58 55 51 48 44 38 72 67 57 51 48 44 37 28 69 67 64 57 51 48 44 37 52 43 36 29 67 61 58 54 51 44 31 *o R 10 mm 2 W - R 20 mm W R 40/3 mm W Ao 96 I kg4A,2 4 2 0,560 0.90 1,25 0.450 0,500 0.560 0,710 0.80 0.900 1.12 1.25 0,450 0,500 0,

30、560 0,710 O. 80 0,900 1,12 1 .a 1.80 2.00 74 72 69 64 60 57 51 40 37 34 0,79 0,s 1,19 1,82 2,26 2,78 4.06 73 8.95 10.85 _ 1,25 - 1.25 74 72 69 64 61 57 54 51 0.70 0.87 1 ,O6 1,61 139 2.46 3.08 3/33 0,400 0,45U 0,500 0,630 0,710 0,800 0,900 1,00 0,800 1 ,00 1,80 1.18 2,57 3,78 0,62 0,n 0,s 1.42 1.76

31、2.17 3,a 56 49 32 75 72 69 64 61 58 51 1.12 0,355 0.400 0.450 0,560 0,630 0,710 0,900 1) For plain steel wire, = 7 850 kg/m3 (see clause 5). Page 5 IS0 4783-2 : 1989 Table 1 - Preferred aperture size and wire diameter combinations (continued) Width of aperture Width of apen Mass) pei unit area A kgi

32、d Massi) pei unit area A kglrn* 0.39 O, w is the width of aperture, in millimetres; e is the material density, in kilograms per cubic metre. Density kg1m3 7850 e Values for e shall be taken from table 2. Table 2 - Material densities Carbon steel Stainless steel (17-19 % Cr, 8-10 % Ni) Aluminium (AIMg5) Copper Brass iCuZn37) Brass iCuZn20) Brass (CuZnlO) Nickel Nickel-copper (NiCu 30 Fe) Copper-tin CuSn6) Phosphor-bronze) 7 850 7900 2 700 8900 8450 8 650 8800 8900 8830 8800