DIN ISO 13942-2001 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942 2000)《粘合磨料产品 限制偏差和跳动误差》.pdf

《DIN ISO 13942-2001 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942 2000)《粘合磨料产品 限制偏差和跳动误差》.pdf》由会员分享，可在线阅读，更多相关《DIN ISO 13942-2001 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942 2000)《粘合磨料产品 限制偏差和跳动误差》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 25.100.70Schleifkrper aus gebundenem Schleifmittel Grenzabmae undLauftoleranzen (ISO 13942 : 2000)This standard incorporates International StandardISO 13942 Bonded abrasive products Limit deviations and run-out tolerances.A comma is used as the decimal marker.National forewordThis standard has b

2、een prepared by ISO/TC 29 Small tools, SC 5 Grinding wheels and abrasives.The responsible German body involved in its preparation was the Normenausschuss Werkzeuge undSpannzeuge (Tools and Clamping Devices Standards Committee), Technical Committee Schleifkrper ausgebundenem Schleifmittel.The DIN Sta

3、ndards corresponding to the International Standards referred to in clause 2 of the ISO Standardare as follows:ISO Standard DIN StandardISO 286-1 DIN ISO 286-1ISO 286-2 DIN ISO 286-2ISO 603-1 DIN ISO 603-1ISO 603-2 DIN ISO 603-2ISO 603-3 DIN ISO 603-3ISO 603-4 DIN ISO 603-4ISO 603-5 DIN ISO 603-5ISO

4、603-6 DIN ISO 603-6ISO 603-7 DIN ISO 603-7ISO 603-8 DIN ISO 603-8ISO 603-9 DIN ISO 603-9ISO 603-10 DIN ISO 603-10ISO 603-11 DIN ISO 603-11ISO 603-12 DIN ISO 603-12ISO 603-13 DIN ISO 603-13ISO 603-14 DIN ISO 603-14ISO 603-15 DIN ISO 603-15ISO 603-16 DIN ISO 603-16AmendmentsDIN 69107, July 1988 editio

5、n, has been superseded by the specifications of DIN ISO 13942.Previous editionsDIN 69107: 1977-08, 1980-04, 1988-07.Ref. No. DIN ISO 13942 : 2001-07English price group 12 Sales No. 041212.01DEUTSCHE NORM July 2001ISO 13942Continued overleaf.ISO Standard comprises 20 pages. No part of this standard m

6、ay be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Bonded abrasive productsLimit deviations and run-out tolerances(ISO 13942 : 2000)Supersedes DIN

7、69107,July 1988 edition.Bonded abrasive productsLimit deviations and run-out tolerancesPage 1ISO 13942 : 2000233467781012131315151616161617181819202020Page 2ISO 13942 : 2000Page 3ISO 13942 : 2000Page 4ISO 13942 : 2000Page 5ISO 13942 : 2000Page 6ISO 13942 : 2000Page 7ISO 13942 : 2000Page 8ISO 13942 : 2000Page 9ISO 13942 : 2000Page 10ISO 13942 : 2000Page 11ISO 13942 : 2000Page 12ISO 13942 : 2000Page 13ISO 13942 : 2000Page 14ISO 13942 : 2000Page 15ISO 13942 : 2000Page 16ISO 13942 : 2000Page 17ISO 13942 : 2000Page 18ISO 13942 : 2000Page 19ISO 13942 : 2000Page 20ISO 13942 : 2000