DIN EN ISO 20344-2013 Personal protective equipment - Test methods for footwear (ISO 20344 2011) German version EN ISO 20344 2011《个人防护装备 鞋靴的试验方法(ISO 20344-2011) 德文版本EN ISO 20344-20.pdf

《DIN EN ISO 20344-2013 Personal protective equipment - Test methods for footwear (ISO 20344 2011) German version EN ISO 20344 2011《个人防护装备 鞋靴的试验方法(ISO 20344-2011) 德文版本EN ISO 20344-20.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 20344-2013 Personal protective equipment - Test methods for footwear (ISO 20344 2011) German version EN ISO 20344 2011《个人防护装备 鞋靴的试验方法(ISO 20344-2011) 德文版本EN ISO 20344-20.pdf（85页珍藏版）》请在麦多课文档分享上搜索。

1、February 2013Translation by DIN-Sprachendienst.English price group 28No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 13.340.50!$RD“1944733www.din.deDDIN EN ISO 20344Personal protective equipment Test methods for footwear (ISO 20344:2011);English version EN ISO 20344:2011,English translation of DIN EN ISO 20344:2013-02Persnliche Schutzausrstung Prfverfahren fr Schuhe (ISO 20344:2011);Englische Fassung EN ISO 2034

3、4:2011,Englische bersetzung von DIN EN ISO 20344:2013-02quipement de protection individuelle Mthodes dessai pour les chaussures (ISO 20344:2011);Version anglaise EN ISO 20344:2011,Traduction anglaise de DIN EN ISO 20344:2013-02SupersedesDIN EN ISO 20344:2012-03www.beuth.deIn case of doubt, the Germa

4、n-language original shall be considered authoritative.Document comprises 85 pages02.13 DIN EN ISO 20344:2013-02 2 A comma is used as the decimal marker. National foreword This document (EN ISO 20344:2011) has been prepared by Technical Committee CEN/TC 161 “Foot and leg protectors” (Secretariat: BSI

5、, United Kingdom) in collaboration with Technical Committee ISO/TC 94 “Personal safety Protective clothing and equipment”. The responsible German body involved in its preparation was the Normenausschuss Persnliche Schutz-ausrstung (Personal Protective Equipment Standards Committee), Working Committe

6、e NA 075-04-01 AA Fu- und Beinschutz. Amendments This standard differs from DIN EN ISO 20344:2007-11 as follows: a) Annex A, a new procedure for plasticine calibration has been included; b) Annex C, a new table for footwear sizes has been included; c) in 4.1, a reference to Table 1 has been included

7、 and the method of sampling has been clarified; d) in 5.1, the note to Figure 1 and question 2 in Table 1 have been deleted; e) instead of a description of the impact apparatus in 5.4 and 5.5 a reference to EN 12568:2010 has been included; f) 5.8.3 “Determination of the penetration resistance of foo

8、twear using a non-metallic anti-penetration insert” has been included; g) 5.15.2 “Dynamic footwear water penetration test” has been included; h) 6.4.2 “Determination of the breaking force of a rubber boot upper” has been included due to the with-drawal of ISO 2023; i) in 6.11, the method of determin

9、ing chromium (VI) has been replaced by a reference to ISO 17075; j) Subclause 5.11 “Determination of the electrical insulation” has been deleted. Compared with DIN EN ISO 20344:2012-03, the following correction has been made to the German version only: a) in Subclause 6.12.6 “Method of assessment”,

10、the third sentence has been modified to adjust the German translation. Previous editions DIN 23301: 1951-06, 1955x-11, 1966-11 DIN 23302: 1953-10, 1956x-03, 1963-04 DIN 23312: 1953-09, 1956x-03 DIN 23322: 1957-09 DIN 23321: 1958-10 DIN 4843: 1968-07, 1985-08, 1988-12 DIN 23329: 1970-01, 1984-10, 199

11、0-04 DIN 4843-1: 1975-10 DIN 4843-2: 1975-10 DIN 4843-3: 1975-11 DIN 4843-4: 1975-11 DIN 32768: 1985-08, 1990-07 DIN 4843-100: 1991-03, 1993-08 DIN EN 344-2: 1993-01 DIN EN 344: 1993-01 DIN EN 344-1: 1997-06 DIN EN ISO 20344: 2004-10, 2007-11, 2012-03 DIN EN ISO 20344 Corrigendum 1: 2006-05 EUROPEAN

12、 STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 20344 December 2011 ICS 13.340.50 Supersedes EN ISO 20344:2004English Version Personal protective equipment - Test methods for footwear quipement de protection individuelle - Mthodes dessai pour les chaussures (ISO 20344:2011) Persnliche Schutzausrstu

13、ng - Prfverfahren fr Schuhe (ISO 20344:2011) This European Standard was approved by CEN on 30 November 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any altera

14、tion. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made

15、by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia

16、, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of e

17、xploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 20344:2011: EEUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG (ISO 20344:2011) Contents Page Foreword . 4 1 Scope . 5 2 Normative references. 5 3

18、Terms and definitions 6 4 Sampling and conditioning . 6 4.1 Sampling . 6 4.2 Conditioning . 6 4.3 Prerequisites on the testing procedure . 6 5 Test methods for whole footwear . 9 5.1 Specific ergonomic features . 9 5.2 Determination of upper/outsole and sole interlayer bond strength . 10 5.3 Determi

19、nation of internal toecap length 15 5.4 Determination of impact resistance . 16 5.5 Determination of compression resistance 19 5.6 Behaviour of toecaps and inserts (thermal and chemical) 21 5.7 Determination of leakproofness . 22 5.8 Determination of the dimensional conformity of inserts and the pen

20、etration resistance of the sole . 22 5.9 Determination of the flex resistance of penetration-resistant inserts 26 5.10 Determination of electrical resistance . 26 5.11 Determination of footwear slip resistance 27 5.12 Determination of insulation against heat. 30 5.13 Determination of insulation agai

21、nst cold. 32 5.14 Determination of energy absorption of the seat region . 33 5.15 Determination of resistance to water for whole footwear 35 5.16 Determination of impact resistance of a metatarsal protective device 40 5.17 Determination of the shock absorption capacity of ankle protection materials

22、incorporated into the upper 44 6 Test methods for upper, lining and tongue . 46 6.1 Determination of thickness of upper 46 6.2 Measurement of the height of the upper 46 6.3 Determination of tear strength of the upper, lining and/or tongue . 47 6.4 Determination of the tensile properties of the upper

23、 material 47 6.5 Determination of upper flexing resistance 48 6.6 Determination of water vapour permeability (WVP) . 51 6.7 Determination of water vapour absorption (WVA) 55 6.8 Determination of water vapour coefficient 58 6.9 Determination of pH value . 58 6.10 Determination of resistance to hydrol

24、ysis of upper . 58 6.11 Determination of chromium VI content 58 6.12 Determination of abrasion resistance of lining and insock . 58 6.13 Determination of water penetration and water absorption for upper . 61 6.14 Determination of resistance of upper to cutting . 63 7 Test methods for insole and inso

25、ck . 63 7.1 Determination of insole thickness 63 7.2 Determination of water absorption and desorption of insole and insock 63 7.3 Determination of abrasion resistance of insole 66 2DIN EN ISO 20344:2013-02 EN ISO 20344:2011 (E) 8 Test methods for outsole 68 8.1 Determination of outsole thickness . 6

26、8 8.2 Determination of tear strength of outsole . 69 8.3 Determination of outsole abrasion resistance 69 8.4 Determination of flexing resistance of outsole . 69 8.5 Determination of resistance to hydrolysis of outsole 74 8.6 Determination of resistance to fuel oil . 74 8.7 Determination of resistanc

27、e to hot contact . 75 Annex A (normative) Procedure for plasticine calibration 78 Annex B (normative) Assessment of footwear by the laboratory during testing of thermal behaviour 80 Annex C (informative) Footwear sizes . 81 Bibliography 82 Annex ZA . 83 3DIN EN ISO 20344:2013-02 EN ISO 20344:2011 (E

28、) Foreword This document (EN ISO 20344:2011) has been prepared by Technical Committee CEN/TC 161 “Foot and leg protectors”, the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC 94 Personal safety - Protective clothing and equipment . This European Standard shall

29、be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may

30、 be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 20344:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Associatio

31、n, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement

32、this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerl

33、and and the United Kingdom. “ ”4DIN EN ISO 20344:2013-02 EN ISO 20344:2011 (E) 1 ScopeThis International Standard specifies methods for testing footwear designed as personal protective equipment.2 Normative referencesThe following referenced documents are indispensable for the application of this do

34、cument. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 34-1:2010, Rubber, vulcanised or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test piecesISO

35、868, Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)ISO 1817:2011, Rubber, vulcanised Determination of the effect of liquidsISO 3290-1, Rolling bearings Balls Dimensions and tolerancesISO 3376, Leather Physical and mechanical tests D

36、etermination of tensile strength and percentage extensionISO 3377-2, Leather Physical and mechanical tests Determination of tear load Part 2: Double edge tearISO 4045, Leather Determination of pHISO 4643:1992, Moulded plastic footwear Lined or unlined poly (vinyl chloride) boots for general industri

37、al use SpecificationISO 4649:2010, Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum deviceISO 4674-1:2003, Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methodsISO 5423:1992, Moulded plastic

38、 footwear Lined or unlined polyurethane boots for general industrial use SpecificationISO 13287, Personal protective equipment Footwear Test method for slip resistanceISO 17075, Leather Chemical analysis Determination of chromium VIISO 20345:2011, Personal protective equipment Safety footwearISO 203

39、47, Personal protective equipment Occupational footwearISO 23529:2010, Rubber General procedures for preparing and conditioning test pieces for physical test methodsEN 388:2003, Protective gloves against mechanical risksEN 12568:2010, Foot and leg protectors Requirements and test methods for toecaps

40、 and penetration-resistant inserts5DIN EN ISO 20344:2013-02 EN ISO 20344:2011 (E) 3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 20345 and ISO 20347 apply.4 Sampling and conditioning4.1 SamplingThe minimum number of samples to be tested in order to c

41、heck compliance with the requirements specified in ISO 20345, ISO 20347 and any specific job-related footwear standards (e.g. ISO 17249, Safety footwear with resistance to chain saw cutting), together with the minimum number of test pieces taken from each sample, shall be in accordance with Table 1.

42、Wherever possible and necessary to ensure the essential safety requirements, test pieces shall be taken from the whole footwear. This paragraph is applicable to all of Table 1.NOTE 1 If it is not possible to obtain a large enough test piece from the footwear, then a sample of the material from which

43、 the component has been manufactured may be used instead. This should be noted in the test report.NOTE 2 Footwear sizes are defined in Annex C.Where samples are required from each of three sizes, these shall comprise the smallest, middle and largest size of the footwear under test indicated as (SML)

44、 in Table 1.4.2 ConditioningAll test pieces shall be conditioned in a standard atmosphere of (23 2) C and (50 5) % RH for a minimum of 48 h before testing, unless otherwise stated in the test method.The maximum time which shall elapse between removal from the conditioning atmosphere and the start of

45、 testing shall not be greater than 10 min, unless otherwise stated in the test method.4.3 Prerequisites on the testing procedureWhen several test pieces are tested, at least the worst results per size shall to be reported.Footwear shall be tested as it is intended to be used, unless otherwise specif

46、ied in the test method. For instance, if there is a removable insock, it shall be left in place to perform the tests.The uncertainty of measurement for each test method described in this International Standard may be assessed. One of the two following approaches should be used: a statistical method,

47、 e.g. that given in ISO 5725-2; a mathematical method, e.g. that given in ENV 13005.6DIN EN ISO 20344:2013-02 EN ISO 20344:2011 (E) Table 1 Minimum number of samples and test piecesProperty under test(B = basic requirement, A = additional requirement)Test only on the final footwearSubclause referenc

48、eType and number of samplesType and number of test pieces per sampleWhole footwearSpecific ergonomic features B yes 5.1 1 pair of shoes in 3 sizes1 pair of shoesUpper/outsole and sole interlayer bond strengthB yes 5.2 1 shoe from each of 3 sizes (SML)1 test piece taken from the shoeInternal toecap l

49、ength B yes 5.3 1 pair of shoes from each of 3 sizes (SML)1 pair of toecapsImpact resistance B yes 5.4 1 pair of shoes from each of 3 sizes (SML)1 pair of shoesCompression resistance B yes 5.5 1 pair of shoes from each of 3 sizes (SML)1 pair of shoesBehaviour of toecaps and inserts (thermal and chemical)B no 5.6See Tables 3 and 4Leakproofness B yes 5.7 2 shoes from different sizes1 shoeDimensional conformity and p