DIN EN ISO 20200-2016 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200 2015.pdf

《DIN EN ISO 20200-2016 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200 2015.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 20200-2016 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200 2015.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、May 2016 English price group 10No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 83.080.01!%SM(“2484205www.din.deDIN

2、EN ISO 20200Plastics Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200:2015);English version EN ISO 20200:2015,English translation of DIN EN ISO 20200:2016-05Kunststoffe Bestimmung des Zersetzungsgrades von

3、Kunststoffmaterialien unter nachgebildeten Kompostierungsbedingungen mittels einer Prfung im Labormastab (ISO 20200:2015);Englische Fassung EN ISO 20200:2015,Englische bersetzung von DIN EN ISO 20200:2016-05Plastiques Dtermination du degr de dsintgration de matriaux plastiques dans des conditions de

4、 compostage simules lors dun essai de laboratoire (ISO 20200:2015);Version anglaise EN ISO 20200:2015,Traduction anglaise de DIN EN ISO 20200:2016-05SupersedesDIN EN ISO 20200:2005-10www.beuth.deDocument comprises 15 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language origi

5、nal shall be considered authoritative.04.16 DIN EN ISO 20200:2016-05 2 A comma is used as the decimal marker. National foreword This document (EN ISO 20200:2015) has been prepared by Technical Committee ISO/TC 61 “Plastics” in collaboration with Technical Committee CEN/TC 249 “Plastics” (Secretariat

6、: NBN, Belgium). The responsible German body involved in its preparation was DIN-Normenausschuss Kunststoffe (DIN Standards Committee Plastics), Working Committee NA 054-01-07 AA Bioabbaubare Kunststoffe. The DIN Standard corresponding to the International Standard referred to in this document is as

7、 follows: ISO 3310-1 DIN ISO 3310-1 Amendments This standard differs from DIN EN ISO 20200:2005-10 as follows: a) the term “heavy metal” has been replaced by “regulated metal” (3.2); b) the term “commercial” has been replaced by “municipal or industrial” (Clauses 4 and 5); c) the numerical value of

8、R 42,8 % has been replaced by 42,3 % (Clause 13); d) the variability of the results has been increased from 10 % to 20 % (Clause 13). Previous editions DIN EN ISO 20200: 2005-10 National Annex NA (informative) Bibliography DIN ISO 3310-1, Test sieves Technical requirements and testing Part 1: Test s

9、ieves of metal wire cloth EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 20200 December 2015 ICS 83.080.01 Supersedes EN ISO 20200:2005English Version Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale t

10、est (ISO 20200:2015) Plastiques - Dtermination du degr de dsintgration de matriaux plastiques dans des conditions de compostage simules lors dun essai de laboratoire (ISO 20200:2015) Kunststoffe - Bestimmung des Zersetzungsgrades von Kunststoffmaterialien unter nachgebildeten Kompostierungsbedingung

11、en mittels einer Prfung im Labormastab (ISO 20200:2015) This European Standard was approved by CEN on 17 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without

12、any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other lang

13、uage made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmar

14、k, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FO

15、R STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 20200:2015 EEuropean foreword

16、 .3Introduction 51 Scope . 62 Normative references 63 Terms and definitions . 64 Principle 75 Synthetic solid waste 76 Composting reactor . 87 Procedure. 87.1 Test material preparation 87.2 Start-up of the test . 97.3 Thermophilic incubation period (high temperature) . 97.4 Mesophilic incubation per

17、iod (at room temperature) . 98 Monitoring the composting process 109 Diagnostic parameters 109.1 Odour 109.2 Visual appearance . 109.3 Chemical analysis . 109.4 Determination of dry mass and volatile solids . 1010 Termination of the test and measurement of the degree of disintegration . 1111 Calcula

18、tion of degree of disintegration 1112 Expression of results . 1113 Validity of the test . 1114 Test report 12Contents PageDIN EN ISO 20200:2016-05 EN ISO 20200:2015 (E) 2Foreword 4European foreword This document (EN ISO 20200:2015) has been prepared by Technical Committee ISO/TC 61 “Plastics“ in col

19、laboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards sha

20、ll be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 20200:2005

21、. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, G

22、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 20200:2015 has been approved by CEN as EN ISO 2020

23、0:2015 without any modification. DIN EN ISO 20200:2016-05 EN ISO 20200:2015 (E) 3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through

24、 ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborate

25、s closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval crit

26、eria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of

27、 patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name

28、used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical

29、Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 61, Plastics, Subcommittee SC 5, Physical-chemical properties.This second edition cancels and replaces the first edition (ISO 20200:2004), which has been technical

30、ly revised with the following changes:a) the term “heavy metal” has been replaced by “regulated metal” (3.2);b) the term “commercial” has been replaced by “municipal or industrial” (Clause 4 and 5);c) the numerical value of R 42,8 % has been replaced by 42,3 % (Clause 13);d) the variability of the r

31、esults has been raised from 10 % to 20 % (Clause 13).DIN EN ISO 20200:2016-05 EN ISO 20200:2015 (E) 4 IntroductionThe test method described in this International Standard determines the degree of disintegration of plastic materials when exposed to a composting environment. The method is simple and i

32、nexpensive, does not require special bioreactors, and is scaled for use in any general-purpose laboratory. It requires the use of a standard and homogeneous synthetic solid waste. The synthetic waste components are dry, clean, safe products which can be stored in the laboratory without any odour or

33、health problems. The synthetic waste is of constant composition and devoid of any undesired plastic material which could be erroneously identified as test material at the end of testing, altering the final evaluation. The bioreactors are small, as is the amount of synthetic waste to be composted (ap

34、proximately 3 l). With the limited amount of test material, this method provides a simplified test procedure. This test method is not aimed at determining the biodegradability of plastic materials under composting conditions. Further testing will be necessary before being able to claim compostabilit

35、y.DIN EN ISO 20200:2016-05 EN ISO 20200:2015 (E) 5 1 ScopeThis International Standard specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradabili

36、ty of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only t

37、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 3310-1, Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth3 Terms and definitionsFor the purposes of this document, the following

38、 terms and definitions apply.3.1compostorganic soil conditioner obtained by biodegradation of a mixture consisting principally of vegetable residues, occasionally with other organic material and having a limited mineral content3.2compostabilityability of a material to be biodegraded in a composting

39、processNote 1 to entry: To claim compostability, it must have been demonstrated that a material can be biodegraded and disintegrated in a composting system (as can be shown by standard test methods) and completes its biodegradation during the end-use of the compost. The compost must meet the relevan

40、t quality criteria. Quality criteria are, e.g. low regulated metal content, no ecotoxicity, no obviously distinguishable residues.3.3compostingaerobic process designed to produce compost3.4disintegrationphysical breakdown of a material into very small fragments3.5dry massmass of a sample measured af

41、ter dryingNote 1 to entry: Dry mass is expressed as a percentage of the mass of the wet sample.3.6mesophilic incubation periodincubation at 25 C to allow the development of microorganisms growing at room temperatureDIN EN ISO 20200:2016-05 EN ISO 20200:2015 (E) 6 3.7thermophilic incubation periodinc

42、ubation at 58 C to allow the development of microorganisms growing at high temperature3.8total dry solidsamount of solids obtained by taking a known volume of test material or compost and drying at about 105 C to constant mass3.9volatile solidsamount of solids obtained by subtracting the residue obt

43、ained from a known volume of test material or compost after incineration at about 550 C from the total dry solids (3.8) content of the same sampleNote 1 to entry: The volatile-solids content is an indication of the amount of organic matter present.4 PrincipleThe method determines the degree of disin

44、tegration of test materials on a laboratory scale under conditions simulating an intensive aerobic composting process. The solid matrix used consists of a synthetic solid waste inoculated with mature compost taken from a municipal or industrial composting plant. Pieces of the plastic test material a

45、re composted with this prepared solid matrix. The degree of disintegration is determined after a composting cycle, by sieving the final matrix through a 2 mm sieve in order to recover the non-disintegrated residues. The reduction in mass of the test sample is considered as disintegrated material and

46、 used to calculate the degree of disintegration.5 Synthetic solid wasteThe composition of the synthetic waste used in this method is described in Table 1.Well aerated compost from a municipal or industrial aerobic composting plant shall be used as the inoculum. The compost inoculum shall be homogene

47、ous and free from large inert objects such as glass, stones, or pieces of metal. Remove any such objects manually and then sieve the compost on a screen of mesh aperture between 0,5 cm and 1 cm. It is recommended that compost from a plant composting the organic fraction of solid municipal waste be u

48、sed in order to ensure sufficient diversity of microorganisms. If such a compost is not available, then compost from plants treating farmyard waste or mixtures of garden waste and solid municipal waste can be used. The compost shall not be older than four months.Prepare the synthetic waste manually by mixing the different components listed in Table 1. The allowed tolerance on the mass measurements of the synthetic waste components, water included, is 5