DIN EN ISO 669-2016 Resistance welding - Resistance welding equipment - Mechanical and electrical requirements (ISO 669 2016) German version EN ISO 669 2016《阻焊 阻焊设备 机械和电气要求(ISO 669.pdf

《DIN EN ISO 669-2016 Resistance welding - Resistance welding equipment - Mechanical and electrical requirements (ISO 669 2016) German version EN ISO 669 2016《阻焊 阻焊设备 机械和电气要求(ISO 669.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 669-2016 Resistance welding - Resistance welding equipment - Mechanical and electrical requirements (ISO 669 2016) German version EN ISO 669 2016《阻焊 阻焊设备 机械和电气要求(ISO 669.pdf（47页珍藏版）》请在麦多课文档分享上搜索。

1、English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25.160.30!%XL9“2534122www.din.deDIN EN ISO 66

2、9Resistance welding Resistance welding equipment Mechanical and electrical requirements (ISO 669:2016);English version EN ISO 669:2016,English translation of DIN EN ISO 669:2016-07Widerstandsschweien Widerstandsschweieinrichtungen Mechanische und elektrische Anforderungen (ISO 669:2016);Englische Fa

3、ssung EN ISO 669:2016,Englische bersetzung von DIN EN ISO 669:2016-07Soudage par rsistance Matriel de soudage par rsistance Exigences mcaniques et lectriques (ISO 669:2016);Version anglaise EN ISO 669:2016,Traduction anglaise de DIN EN ISO 669:2016-07SupersedesDIN ISO 669:2001-06www.beuth.deDocument

4、 comprises 47 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.July 201607.16DIN EN ISO 669:2016-07 2 A comma is used as the decimal marker. National foreword This document (EN ISO 669:2016) has been prepared by Technical Commit

5、tee ISO/TC 44 “Welding and allied processes”, Subcommittee SC 6 “Resistance welding and allied mechanical joining” (Secretariat: DIN, Germany) in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” (Secretariat: DIN, Germany). The responsible German body involved in its

6、preparation was DIN-Normenausschuss Schweien und verwandte Verfahren (DIN Standards Committee Welding and Allied Processes), Working Group NA 092-00-12-06 AK Fertigungsmittel zum Widerstandsschweien (DVS AG V 3.8). The DIN Standards corresponding to the International Standards referred to in this do

7、cument are as follows: ISO 865 DIN EN 20865 ISO 5184 DIN ISO 5184 ISO 5821 DIN EN ISO 5821 ISO 5826:2014 DIN EN ISO 5826:2014-07 ISO 8430-1 DIN EN 28430-1 ISO 8430-2 DIN EN 28430-2 ISO 8430-3 DIN EN 28430-3 ISO 17657-2 DIN EN ISO 17657-2 ISO 17657-5 DIN EN ISO 17657-5 ISO 17677-1 DIN EN ISO 17677-1

8、IEC 60204-1 DIN EN 60204-1 (VDE 0113-1) IEC 60664-1 DIN EN 60664-1 (VDE 0110-1) IEC 62135-1 DIN EN 62135-1 (VDE 0545-1) Amendments This standard differs from DIN ISO 669:2001-06 as follows: a) Clause 1 “Scope” has been updated; b) Clause 2 “Normative references” has been updated; c) terms and defini

9、tions have been revised; d) the technical content of the standard has been brought in line with the state of the art; e) editorial amendments have been made throughout the document. Previous editions DIN ISO 669: 1982-04, 2001-06 DIN EN ISO 669:2016-07 3 National Annex NA (informative) Bibliography

10、DIN EN 20865, Slots in platens for projection welding machines DIN EN ISO 5821, Resistance welding Spot welding electrode caps DIN EN ISO 5826:2014-07, Resistance welding equipment Transformers General specifications applicable to all transformers (ISO 5826:2014) DIN EN 28430-1, Resistance spot weld

11、ing Electrode holders Part 1: Taper fixing 1:10 DIN EN 28430-2, Resistance spot welding Electrode holders Part 2: Morse taper fixing DIN EN 28430-3, Resistance spot welding Electrode holders Part 3: Parallel shank fixing for end thrust DIN EN ISO 17657-2, Resistance welding Welding current measureme

12、nt for resistance welding Part 2: Welding current meter with current sensing coil DIN EN ISO 17657-5, Resistance welding Welding current measurement for resistance welding Part 5: Verification of welding current measuring system DIN EN ISO 17677-1, Resistance welding Vocabulary Part 1: Spot, project

13、ion and seam welding DIN EN 60204-1 (VDE 0113-1), Safety of machinery Electrical equipment of machines Part 1: General requirements DIN EN 60664-1 (VDE 0110-1), Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests DIN EN 62135-1 (VDE 0545-1), Re

14、sistance welding equipment Part 1: Safety requirements for design, manufacture and installation DIN ISO 5184, Straight resistance spot welding electrodes DIN EN ISO 669:2016-07 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 669 March 2016 ICS 25.160.30 En

15、glish Version Resistance welding Resistance welding equipment Mechanical and electrical requirements (ISO 669:2016) Soudage par rsistance Matriel de soudage par rsistance Exigences mcaniques et lectriques (ISO 669:2016) Widerstandsschweien Widerstandsschweieinrichtungen Mechanische und elektrische A

16、nforderungen (ISO 669:2016) This European Standard was approved by CEN on 2 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date li

17、sts and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation unde

18、r the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Y

19、ugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EURO

20、PEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 669:2016 E EN ISO 669:2016 (E) Contents Page 2European fo

21、reword . 4 Foreword 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions 7 3.1 Mechanical parts of spot, projection, and seam welding equipment 7 3.2 Mechanical parts of upset and flash welding equipment . 13 3.3 Static mechanical characteristics 16 3.4 Electrical and thermal characteris

22、tics 19 3.5 Pneumatic and hydraulic characteristics . 21 4 Symbols and abbreviated terms 21 5 Physical environment and operating conditions. 23 5.1 General 23 5.2 Ambient air temperature . 23 5.3 Liquid cooling medium 23 5.4 Humidity . 23 5.5 Altitude . 24 5.6 Transportation and storage 24 6 Test co

23、nditions . 24 6.1 General 24 6.2 Environmental conditions . 24 6.3 Measuring instruments . 24 7 Rated no load voltage at the output 25 7.1 General 25 7.2 a.c. no load voltage (U20) 25 7.3 d.c. no load voltage (U2d) 25 8 Maximum short circuit current 25 8.1 General 25 8.2 Spot and seam welding equipm

24、ent . 26 8.3 Projection welding equipment . 26 8.4 Upset and flash welding equipment . 27 9 Thermal rating . 28 9.1 General 28 9.2 Thermal test 28 10 Cooling liquid circuit (liquid cooled welding equipment) . 28 11 Static mechanical characteristics 29 11.1 General 29 11.2 Spot and projection welding

25、 equipment . 29 11.2.1 General 29 11.2.2 Eccentricity 30 DIN EN ISO 669:2016-07 EN ISO 669:2016 (E) 311.2.3 Angular deflection . 31 11.2.4 Radial deflection 31 11.2.5 Axial deflection . 32 11.2.6 Machine stiffness . 32 11.2.7 Parallelism of top and bottom platen . 32 11.2.8 Perpendicularity in plate

26、n movement, 433 11.3 Seam welding equipment 34 11.3.1 General 34 11.3.2 Eccentricity 34 11.3.3 Angular deflection . 35 11.4 Upset welding equipment . 35 11.4.1 General 35 11.4.2 Angular deflection . 36 12 Rating plate 36 12.1 General 36 12.2 Description . 37 12.3 Tolerances 39 13 Instruction manual

27、39 Annex A (informative) Examples of rating plates 41 Bibliography . 43 DIN EN ISO 669:2016-07 EN ISO 669:2016 (E) European foreword This document (EN ISO 669:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121

28、“Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2016, and conflicting national standards shall be withdrawn at the

29、 latest by September 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the nati

30、onal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit

31、huania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 669:2016 has been approved by CEN as EN ISO 669:2016 without any modification. 4DIN EN ISO 669:2016-07 Foreword

32、ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical

33、committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of elect

34、rotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was dr

35、afted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent r

36、ights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not const

37、itute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe com

38、mittee responsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 6, Resistance welding and allied mechanical joining.This third edition cancels and replaces the second edition (ISO 669:2000), which has been technically revised.EN ISO 669:2016 (E) 5DIN EN ISO 669:2016-

39、07 1 ScopeThis International Standard defines and specifies certain identified electrical and mechanical characteristics of equipment used for resistance spot welding, projection welding, resistance seam welding, upset welding1), and flash welding2).This International Standard specifies the informat

40、ion to be given in equipment specifications and the test methods to be used for measuring those characteristics.Not all requirements apply to all types of equipment.The following types of power sources are included: single phase with alternating welding current; single phase with rectified welding c

41、urrent by rectification of the output of the welding transformer; single phase with inverter welding transformer; three phase with rectified welding current by rectification of the output of the welding transformer; three phase with a current rectification in the input of the welding transformer (so

42、metimes called frequency convertor); three phase with inverter welding transformers.This International Standard does not apply to welding transformers that are separate from the equipment.NOTE Safety requirements for resistance welding equipment are covered by IEC 621351.2 Normative referencesThe fo

43、llowing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 5826:2014,

44、 Resistance welding equipment Transformers General specifications applicable to all transformersISO 17657-2, Resistance welding Welding current measurement for resistance welding Part 2: Welding current meter with current sensing coil1) Often referred to by the non-preferred term, butt welding.2) Of

45、ten referred to by the non-preferred term, flash butt welding.EN ISO 669:2016 (E) 6DIN EN ISO 669:2016-07 ISO 17657-5, Resistance welding Welding current measurement for resistance welding Part 5: Verification of welding current measuring systemISO 17677-1, Resistance welding Vocabulary Part 1: Spot

46、, projection and seam weldingIEC 62135-1, Resistance welding equipment Part 1: Safety requirements for design, manufacture and installation3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 17677-1 and the following apply.3.1 Mechanical parts of spot, pr

47、ojection, and seam welding equipment3.1.1armdevice for transmitting the electrode force (3.1.16) which can also conduct the welding current or support a separate conductorNote 1 to entry: See Figure 1 and Figure 3.3.1.2welding headdevice comprising the force generation and guiding system carrying an

48、 electrode holder (3.1.3), platen (3.1.5), or seam welding head (3.1.6) mounted to the upper arm or directly to the machine bodyNote 1 to entry: See Figure 1.3.1.3electrode holderdevice holding a spot welding electrode (3.1.4) or an electrode adaptorSOURCE: ISO 8430-1, ISO 8430-2, and ISO 8430-3Note

49、 1 to entry: See Figure 1.EN ISO 669:2016 (E) 7DIN EN ISO 669:2016-07 12378749314a) Spot welding equipment b) Projection welding equipment42111101010110112c) Longitudinal seam welding equipment d) Transverse seam welding equipment72874615e) Rocker arm welding equipmentEN ISO 669:2016 (E) 8DIN EN ISO 669:2016-07 f) Welding gun without transformer g) Manual gun with integrated transformerh) Robot mount C-gunKey1 force generation system 5 frame 9 platen2 moveable arm