DIN EN ISO 15083-2003 Small craft - Bilge pumping systems (ISO 15083 2003) German version EN ISO 15083 2003《小艇 舱底泵吸系统》.pdf

《DIN EN ISO 15083-2003 Small craft - Bilge pumping systems (ISO 15083 2003) German version EN ISO 15083 2003《小艇 舱底泵吸系统》.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 15083-2003 Small craft - Bilge pumping systems (ISO 15083 2003) German version EN ISO 15083 2003《小艇 舱底泵吸系统》.pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 47.080Kleine Wasserfahrzeuge Lenzeinrichtungen (ISO 15083 : 2003)European Standard EN ISO 15083 : 2003 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/CMC to adopt, withoutalterati

2、on, International Standard ISO 15083 as a European Standard.The responsible German body involved in its preparation was the Normenstelle Schiffs- und Meerestechnik(Shipbuilding and Marine Technology Standards Committee).DIN 40050-9 and DIN EN ISO 9093-1 are the standards corresponding to IEC Publica

3、tion IEC 60529 andInternational Standard ISO 9093-1, respectively, referred to in clause 2 of the EN.National Annex NAStandards referred to(and not included in Normative references and Annex ZA)DIN 40050-9 Road vehicles Degrees of protection provided by enclosures (IP-code) Protectionof electrical e

4、quipment against contact, foreign bodies and waterDIN EN ISO 9093-1 Small craft Seacocks and through-hull fittings Part 1: Metallic components(ISO 9093-1 : 1994)Ref. No. DIN EN ISO 15083 : 2003-06English price group 09 Sales No. 110911.03DEUTSCHE NORM June 2003EN ISO 15083Continued overleaf.EN compr

5、ises 11 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Small craftBilge-pumping systems(ISO 15083 : 2003)Engli

6、sh version of DIN EN ISO 15083English versionICS 47.080Descriptors:Small craftBilge-pumping systems(ISO 15083 : 2003) 2003. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 15083 : 2003 EKleine Wasserfahrzeuge Lenzein-richtungen (

7、ISO 15083 : 2003)This European Standard was approved by CEN on 2002-12-11.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliograph

8、ical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN membe

9、r into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,Italy, Luxembourg, Malta, the Netherlan

10、ds, Norway, Portugal, Slovakia, Spain,Sweden, Switzerland, and the United Kingdom.EN ISO 15083February 2003Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr Normung|Petits navires Systmes de pompesde cale

11、(ISO 15083 : 2003)Page 2EN ISO 15083 : 2003ForewordInternational StandardISO 15083 : 2003 Small craft Bilge-pumping systems,which was prepared by ISO/TC 188 Small craft of the International Organization for Standardization, has beenadopted by CMC as a European Standard.This European Standard has bee

12、n prepared under a mandate given to CEN by the European Commission andthe European Free Trade Association, and supports essential requirements of the relevant EU Directive. Forrelationship with this directive, see Annex ZB.This European Standard shall be given the status of a national standard, eith

13、er by publication of an identical textor by endorsement, and conflicting national standards withdrawn, by August 2003 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard:Au

14、stria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and theUnited Kingdom.Endorsement noticeThe text of the International Standard ISO 15083 : 2003

15、was approved by CEN as a European Standard withoutany modification.NOTE: Normative references to international publications are listed in Annex ZA (normative).2333356677888899Page 3EN ISO 15083 : 2003Page 4EN ISO 15083 : 2003Page 5EN ISO 15083 : 2003Page 6EN ISO 15083 : 2003Page 7EN ISO 15083 : 2003Page 8EN ISO 15083 : 2003Page 9EN ISO 15083 : 2003Page 10EN ISO 15083 : 2003Page 11EN ISO 15083 : 2003