DIN EN 16602-40-12-2014 Space product assurance - Fault tree analysis - Adoption notice ECSS IEC 61025 English version EN 16602-40-12 2014《航天产品保证 故障树分析 ECSS IEC 61025采用通知 英文版本EN 16.pdf

《DIN EN 16602-40-12-2014 Space product assurance - Fault tree analysis - Adoption notice ECSS IEC 61025 English version EN 16602-40-12 2014《航天产品保证 故障树分析 ECSS IEC 61025采用通知 英文版本EN 16.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16602-40-12-2014 Space product assurance - Fault tree analysis - Adoption notice ECSS IEC 61025 English version EN 16602-40-12 2014《航天产品保证 故障树分析 ECSS IEC 61025采用通知 英文版本EN 16.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、Dezember 2014DEUTSCHE NORM DIN-Normenausschuss Luft- und Raumfahrt (NL)Preisgruppe 9DIN Deutsches Institut fr Normung e. V. Jede Art der Vervielfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr Normung e. V., Berlin, gestattet.ICS 49.140!%=Z“2265559www.din.deDDIN EN 1660

2、2-40-12Raumfahrtproduktsicherung Fehlerbaumanalyse Adoption notice ECSS/IEC 61025;Englische Fassung EN 16602-40-12:2014Space product assurance Fault tree analysis Adoption notice ECSS/IEC 61025;English version EN 16602-40-12:2014Assurance produit des projets spatiaux Analyse par arbre de panne Notic

3、e dadoption de la norme ECSS/CEI 61025;Version anglaise EN 16602-40-12:2014Alleinverkauf der Normen durch Beuth Verlag GmbH, 10772 Berlin www.beuth.deGesamtumfang 14 SeitenDIN EN 16602-40-12:2014-12 2 Nationales Vorwort Dieses Dokument (EN 16602-40-12:2014) wurde vom Technischen Komitee CEN/CLC/TC 5

4、 Raumfahrt“ erarbeitet, dessen Sekretariat vom DIN (Deutschland) gehalten wird. Das zustndige deutsche Normungsgremium ist der Arbeitsausschuss NA 131-10-01 AA Interoperabilitt von Informations-, Kommunikations- und Navigationssystemen“ im DIN-Normenausschuss Luft- und Raumfahrt (NL). Dieses Dokumen

5、t (EN 16602-40-12:2014) basiert auf ECSS-Q-ST-40-12C. Dieses Dokument enthlt unter Bercksichtigung des DIN-Prsidialbeschlusses 1/2004 nur die englische Originalfassung von EN 16602-40-12:2014. Dieses Dokument wurde speziell zur Behandlung von Raumfahrtsystemen erarbeitet und hat daher Vorrang vor je

6、glicher Europischer Norm, da es denselben Anwendungsbereich hat, jedoch ber einen greren Geltungsbereich (z. B. Luft- und Raumfahrt) verfgt. DIN EN 16602-40-12:2014-12 3 Nationaler Anhang NA (informativ) Begriffe und Abkrzungen 3 Begriffe und Abkrzungen 3.1 Begriffe aus anderen Normen Fr die Anwendu

7、ng dieser Norm gelten die Begriffe nach ECSS-S-ST-00-01, im Besonderen der folgende Begriff: Zuverlssigkeit 3.2 Abkrzungen Fr die Anwendung dieser Norm gelten die Abkrzungen nach ECSS-S-ST-00-01 und die folgenden Abkrzungen: Abkrzung Bedeutung ECSS European Cooperation for Space Standardization IEC

8、Internationale Elektrotechnische Kommission (en: International Electrotechnical Commission) FT Fehlerbaum (en: fault tree) FTA Fehlzustandsbaumanalyse (en: fault tree analysis) (U.S.) NRC United States Nuclear Regulatory Commission, Washington, DC DIN EN 16602-40-12:2014-12 4 Leerseite EUROPEAN STAN

9、DARD NORME EUROPENNE EUROPISCHE NORM EN 16602-40-12 September 2014 ICS 49.140 English version Space product assurance - Fault tree analysis - Adoption notice ECSS/IEC 61025 Assurance produit des projets spatiaux - Analyse par arbre de panne - Notice dadoption de la norme ECSS/CEI 61025Raumfahrtprodu

10、ktsicherung - Fehlerbaumanalyse - Adoption notice ECSS/IEC 61025 This European Standard was approved by CEN on 13 March 2014. CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nationa

11、l standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC member. This European Standard exists in three official versions (English, French, Germa

12、n). A version in any other language made by translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN and CENELEC members are the national standards bodies and national el

13、ectrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,

14、 Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 16602

15、-40-12:2014 EEN 16602-40-12:2014 (E) 2 Table of contents Foreword 3 1 Scope . 4 2 Normative references . 5 3 Terms, definitions and abbreviated terms 6 3.1 Terms defined in other standards . 6 3.2 Abbreviated terms. 6 4 Principles 7 5 Requirements 8 5.1 ECSS usage restriction . 8 5.1.1 Applicability

16、 . 8 5.1.2 Procedure . 8 5.1.3 Software tools supporting FTA 9 Bibliography . 10 DIN EN 16602-40-12:2014-12 EN 16602-40-12:2014 (E) 3 Foreword This document (EN 16602-40-12:2014) has been prepared by Technical Committee CEN/CLC/TC 5 “Space”, the secretariat of which is held by DIN. This standard (EN

17、 16602-40-12:2014) originates from ECSS-Q-ST-40-12C. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2015, and conflicting national standards shall be withdrawn at the latest by March 2015.

18、Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commissio

19、n and the European Free Trade Association. This document has been developed to cover specifically space systems and has therefore precedence over any EN covering the same scope but with a wider domain of applicability (e.g. : aerospace). According to the CEN-CENELEC Internal Regulations, the nationa

20、l standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithua

21、nia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16602-40-12:2014-12 EN 16602-40-12:2014 (E) 4 1 Scope This Standard defines requirements for the performance of Fault Tree Analysis (FTA) on s

22、pace projects and incorporates the IEC 61025 standard into the ECSS system. With effect from the date of approval, this Standard announces the adoption of the external document on a restricted basis for use in the European Cooperation for Space Standardization (ECSS) system. This standard may be tai

23、lored for the specific characteristic and constraints of a space project in conformance with ECSS-S-ST-00. DIN EN 16602-40-12:2014-12 EN 16602-40-12:2014 (E) 5 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of

24、this ECSS Standard. For dated references, subsequent amendments to, or revisions of any of these publications do not apply. However, parties to agreements based on this ECSS Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicat

25、ed below. For undated references the latest edition of the publication referred to applies. EN reference Reference in text Title EN 16601-00-01 ECSS-S-ST-00-01 ECSS system Glossary of terms EN 16602-30 ECSS-Q-ST-30 Space product assurance Dependability EN 16602-40 ECSS-Q-ST-40 Space product assuranc

26、e Safety IEC 61025 (1990-10) Fault tree analysis (FTA) DIN EN 16602-40-12:2014-12 EN 16602-40-12:2014 (E) 6 3 Terms, definitions and abbreviated terms 3.1 Terms defined in other standards For the purpose of this Standard, the terms and definitions from ECSS-S-ST-00-01 apply, in particular for the fo

27、llowing terms: dependability 3.2 Abbreviated terms For the purpose of this Standard, the abbreviated terms from ECSS-S-ST-00-01 and the following apply: Abbreviation Meaning ECSS European Cooperation for Space Standardization IEC International Electrotechnical Commission FT fault tree FTA fault tree

28、 analysis NUREG U.S. Nuclear Regulatory Commission, Washington, DC DIN EN 16602-40-12:2014-12 EN 16602-40-12:2014 (E) 7 4 Principles The standard IEC 61025 (1990-10) titled “Fault tree analysis (FTA)” defines basic principles, provides the steps necessary to perform an analysis, identifies appropria

29、te assumptions, events and failure modes, and provides identification rules and symbols. DIN EN 16602-40-12:2014-12 EN 16602-40-12:2014 (E) 8 5 Requirements 5.1 ECSS usage restriction 5.1.1 Applicability a. The supplier shall use the FTA as defined in ECSS-Q-ST-30 and ECSS-Q-ST-40. b. The supplier s

30、hall perform a FTA for: 1. selected undesirable events which could have catastrophic, critical or major consequences; NOTE For definition for the scale of severity, refer to ECSS-Q-ST-30. 2. support of failure; 3. accident investigations. NOTE This is to limit the amount of effort in performing the

31、analysis. c. The supplier shall agree with the customer on the content of the FTA. d. The supplier shall provide the FTA for customer review. e. Where FTA is used in failure or accident investigations, the supplier shall agree with the relevant Review Board on the depth of the FTA. 5.1.2 Procedure a

32、. The supplier shall perform the FTA in conformance with the methodology and symbols described in IEC 61025. NOTE 1 IEC 61025 uses general terms to describe the FTA process, including preparations for the FTA, the procedure itself and the output report. NOTE 2 Users are encouraged to make sure that

33、they have a clear understanding and interpretation of these general terms when taken in the context of the space system under analysis. NOTE 3 The informative reference, NUREG 0492 (1991) “Fault Tree Handbook” can be used as a comprehensive reference work to complement this ECSS Standard. DIN EN 166

34、02-40-12:2014-12 EN 16602-40-12:2014 (E) 9 5.1.3 Software tools supporting FTA a. When using a computer program to support the FTA, the supplier shall use a computer program which fulfils the following criteria: 1. it supports the functionality which is necessary to perform the FTA; 2. it is compati

35、ble with project requirements for electronic data transfer and the interchange of data between interacting programs or tools. NOTE Although there are several proprietary software programs available for various platforms designed to assist the FT analyst, this ECSS Standard does not endorse any parti

36、cular product. DIN EN 16602-40-12:2014-12 EN 16602-40-12:2014 (E) 10 Bibliography EN reference Reference in text Title EN 16601-00 ECSS-S-ST-00 ECSS system Description, implementation and general requirements NUREG 0492 (1991) Fault Tree Handbook - Reliability and Risk Analysis, Norman J McCormick, Academic Press DIN EN 16602-40-12:2014-12