DIN EN 16471-2015 Firefighters helmets - Helmets for wildland fire fighting German version EN 16471 2014《消防员头盔 野外消防头盔 德文版本EN 16471-2014》.pdf

《DIN EN 16471-2015 Firefighters helmets - Helmets for wildland fire fighting German version EN 16471 2014《消防员头盔 野外消防头盔 德文版本EN 16471-2014》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16471-2015 Firefighters helmets - Helmets for wildland fire fighting German version EN 16471 2014《消防员头盔 野外消防头盔 德文版本EN 16471-2014》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、March 2015 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、13.340.20!%“2299991www.din.deDDIN EN 16471Firefighters helmets Helmets for wildland fire fighting;English version EN 16471:2014,English translation of DIN EN 16471:2015-03Feuerwehrhelme Helme fr Wald- und Flchenbrandbekmpfung;Englische Fassung EN 16471:2014,Englische bersetzung von DIN EN 16471:2015

3、-03Casques de sapeurs-pompiers Casques pour la lutte contre les feux despaces naturels;Version anglaise EN 16471:2014,Traduction anglaise de DIN EN 16471:2015-03www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 22 pages 02.15 DIN EN 16471

4、:2015-03 2 A comma is used as the decimal marker. National foreword This document (EN 16471:2014) has been prepared by Technical Committee CEN/TC 158 “Head protection” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the DIN-Normenausschuss Feuerwehrwes

5、en (DIN Standards Committee Firefighting and Fire Protection), Working Committee NA 031-04-03 AA Persn-liche Schutzausrstung fr die Feuerwehr SpA zu CEN/TC 158/WG 3. Helmets as in this European Standard are intended to protect the upper head mainly against the effects of impact, penetration, heat, f

6、lame and burning embers while conducting fire fighting and associated activities in wildland environments. Wildland environments include forests, crops, plantations and grass/heath/scrub or farmland. Helmets for use while fire fighting in buildings and other structures or helmets for technical rescu

7、e are not covered by this European Standard (see DIN EN 443 and DIN EN 16473). The DIN Standards corresponding to the International Standards referred to in Clause 2 of this standard are as follows: ISO 17493 there is no corresponding German document available National Annex NA (informative) Bibliog

8、raphy DIN EN 443, Helmets for fire fighting in buildings and other structures DIN EN 16473, Firefighters helmets Helmets for technical rescue EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16471 December 2014 ICS 13.340.20 English Version Firefighters helmets - Helmets for wildland fire fighti

9、ng Casques de sapeurs-pompiers - Casques pour la lutte contre les feux despaces naturels Feuerwehrhelme - Helme fr Wald- und Flchenbrandbekmpfung This European Standard was approved by CEN on 2 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t

10、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standar

11、d exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nation

12、al standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slova

13、kia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means

14、 reserved worldwide for CEN national Members. Ref. No. EN 16471:2014 EEN 16471:2014 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Physical requirements 6 4.1 Materials .6 4.2 Projections .7 4.3 Retention system .7 4.4 Accessories and non-integral addi

15、tional protective devices 7 5 Performance requirements .8 5.1 Extent of Coverage 8 5.2 Shock absorption.8 5.2.1 Crown impact .8 5.2.2 Lateral impacts (front, side, rear) .8 5.3 Penetration resistance 8 5.4 Retention system effectiveness .8 5.5 Retention system strength .8 5.6 Flame resistance 8 5.6.

16、1 Helmet shell 8 5.6.2 Retention system .8 5.6.3 Accessories and no integral additional protective devices 8 5.7 Radiant heat protection / thermal stress .9 5.8 Thermal resistance 9 5.9 Resistance to hot solids .9 5.10 Field of vision .9 5.11 Practical performance 10 5.11.1 General . 10 5.11.2 Requi

17、rements 10 6 Test methods . 10 6.1 Sampling and helmet adjustment . 10 6.1.1 Sampling 10 6.1.2 Helmet adjustment 10 6.2 Visual inspection 11 6.3 Conditioning 11 6.3.1 General . 11 6.3.2 Cleaning and disinfection 11 6.3.3 Ultraviolet (UV) ageing . 11 6.3.4 “Thermal plus” conditioning . 11 6.3.5 “Ther

18、mal minus” conditioning 11 6.3.6 Wet conditioning . 11 6.4 Extent of coverage 11 6.4.1 Equipment . 11 6.4.2 Samples . 11 6.4.3 Test method . 11 6.5 Shock absorption 12 6.5.1 General . 12 6.5.2 Crown impact 12 6.5.3 Lateral impacts (front, side, rear) 12 DINEN 16471:2015-03EN 16471:2014 (E) 3 6.6 Pen

19、etration resistance 12 6.7 Retention system effectiveness . 12 6.8 Retention system strength . 12 6.9 Flame resistance . 13 6.9.1 Helmet shell and items 13 6.9.2 Helmet retention system components 13 6.10 Radiant heat protection/thermal stress . 13 6.11 Thermal resistance 13 6.12 Resistance to hot s

20、olids . 13 6.13 Field of vision 13 6.14 Practical performance testing 13 6.14.1 Test subjects and conditions . 13 6.14.2 Procedure . 14 6.14.3 Test report 15 6.14.4 Variants. 15 7 Marking . 15 8 Information to be supplied by the manufacturer 16 Annex A (normative) Conditioning and testing schedule .

21、 18 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC . 20 DIN EN 16471:2015-03 EN 16471:2014 (E) 4 Foreword This document (EN 16471:2014) has been prepared by Technical Committee CEN/TC 158 “Head protection”, the secretariat

22、 of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015 and conflicting national standards shall be withdrawn at the latest by June 2015. Attention is drawn to the poss

23、ibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade

24、Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. The purpose of this European Standard is to provide minimum performance requirements for helmets designed for use for exte

25、nded periods during wildland fire fighting and associated activities. Wildland fire fighting involves work primarily in summer temperatures, for many hours during which the fire fighter may develop high levels of metabolic heat. Consequently, the protective helmet should be comfortable, light and co

26、mmensurate with the risks to which the fire fighter may be exposed in order to be effective without introducing heat stress to the wearer. This European Standard does not cover helmets for use in situations where helmets conforming to EN 443 are more suitable. According to the CEN-CENELEC Internal R

27、egulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland

28、, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16471:2015-03 EN 16471:2014 (E) 5 1 Scope This European Standard specifies the minimum requirements for wildland fire f

29、ighting helmets protecting the upper head mainly against the effects of impact, penetration, heat, flame and burning embers while conducting fire fighting and associated activities in wildland environments. Requirements for marking and information to be supplied by the manufacturer are included. Wil

30、dland fire fighting involves direct and indirect attack techniques (like wood cutting). Wildland environments include forests, crops, plantations and grass/heath/scrub or farmland. Helmets for use while fire fighting in buildings and other structures are not covered by this European Standard (see EN

31、 443). This helmet is not intended to provide protection during fire entrapment. Protection of the face, eyes, ears and neck may require additional items of personal protective equipment (PPE), which are not covered by this European Standard. 2 Normative references The following documents, in whole

32、or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 168:2001, Personal eye-protection - No

33、n-optical test methods EN 960:2006, Headforms for use in the testing of protective helmets EN 1811, Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the sk

34、in EN 13087-1:2000, Protective helmets - Test methods - Part 1: Conditions and conditioning EN 13087-2, Protective helmets - Test methods - Part 2: Shock absorption EN 13087-3:2000, Protective helmets - Test methods - Part 3: Resistance to penetration EN 13087-4, Protective helmets - Test methods -

35、Part 4: Retention system effectiveness EN 13087-5:2012, Protective helmets Test methods Part 5: Retention system strength EN 13087-6, Protective helmets - Test methods - Part 6: Field of vision EN 13087-7:2000, Protective helmets - Test methods - Part 7: Flame resistance EN 13087-10, Protective helm

36、ets - Test methods - Part 10: Resistance to radiant heat EN ISO 13688, Protective clothing - General requirements (ISO 13688) ISO 17493, Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven DIN EN 16471:2015-03 EN 16471:2014 (

37、E) 6 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 helmet for wildland fire fighting headwear, including all integral components supplied by the manufacturer, intended primarily to protect the upper part of a wearers head against hazards wh

38、ich may occur during wildland fire fighting activities Note 1 to entry: Hereafter, helmets for wildland fire fighting are referred to as helmets. 3.2 helmet shell component in hard material with a smooth finish, which gives the helmet its general shape 3.3 protective padding material and/or suspensi

39、on system which serves to dampen impact energy 3.4 retention system those parts which are responsible for securing the helmet in position on the head, including items which enable adjustment or improved comfort 3.5 chin strap part of a retention system, including a strap which passes under or on the

40、 wearers chin and which helps to ensure that the helmet is correctly maintained in place 3.6 head form shape replacing the head which is used for testing certain characteristics Note 1 to entry: The head form is designed in accordance with EN 960. 3.7 accessories additional device(s) supplied or rec

41、ommended by the manufacturer which may be attached to the helmet but which provide no protective function to the wearer EXAMPLES Lamp brackets, cable clips, badges and trims. 3.8 non-integral additional protective devices additional protective device(s) supplied or recommended by the manufacturer wh

42、ich may be attached to the helmet and intended to be removable by the user EXAMPLES Mesh visors, ear defenders, neck-guard and safety goggles. 4 Physical requirements 4.1 Materials For those parts of the helmet coming, or that may come, into contact with the skin the material used shall not be subje

43、ct to any known appreciable alteration from contact with sweat or with substances likely to be found in toiletries. Materials shall not be used which are known to cause skin disorders or other adverse effects on health. DIN EN 16471:2015-03 EN 16471:2014 (E) 7 Examples of documents, which can be pre

44、sented as evidence of chemical innocuousness, are given in the note. NOTE The following list of documents is given for information and as examples of documents to be examined: a) materials specifications; b) safety data sheets relating to the materials; c) information relating to the suitability of

45、the materials for use with food, in medical devices, or other relevant applications; d) information relating to toxicological, allergenic, carcinogenic, toxic to reproduction or mutagenic investigations on the materials; e) information relating to ecotoxicological and other environmental investigati

46、ons on the materials. The examination should determine whether the claim that the materials are suitable for use in the protective helmet is justified. Particular attention needs to be paid to the presence of plasticisers, unreacted components, heavy metals, impurities and the chemical identity of p

47、igments and dyes. All metallic materials which could come into prolonged contact with the skin (e.g. studs, fittings) shall have a release of Nickel of less than 0,5 g/cm3per week, when tested according to EN 1811. Substances recommended for cleaning, maintenance or disinfection shall have no advers

48、e effect on the helmet and shall be not known to be likely to have any adverse effect upon the wearer, when applied in accordance with the manufacturers instructions. Materials shall conform to the relevant requirements of EN ISO 13688. 4.2 Projections There shall be no sharp edges, roughness or projections on any part of the helmet, which are likely to cause injury to the wearer, in contact or potential contact with the wearer when the helmet is worn. Test according to 6.14. 4.3 Retention system The helmet shall be fitted with a