DIN EN 16158-2012 Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a tree analytical approach German version EN 16158 2012《动物饲料.pdf

《DIN EN 16158-2012 Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a tree analytical approach German version EN 16158 2012《动物饲料.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16158-2012 Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a tree analytical approach German version EN 16158 2012《动物饲料.pdf（27页珍藏版）》请在麦多课文档分享上搜索。

1、May 2012 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 65

2、.120!$|08“1891321www.din.deDDIN EN 16158Animal feeding stuffs Determination of semduramicin content Liquid chromatographic method using a “tree“ analytical approachEnglish translation of DIN EN 16158:2012-05Futtermittel Bestimmung des Semduramicingehalts Flssigkeitschromatographisches Verfahren mit

3、verzweigter analytischer VorgehensweiseEnglische bersetzung von DIN EN 16158:2012-05Aliments pour animaux Dosage de la semduramicine Chromatographie liquide utilisant une approche analytique en arbreTraduction anglaise de DIN EN 16158:2012-05www.beuth.deDocument comprises 27 pagesIn case of doubt, t

4、he German-language original shall be considered authoritative.04.12 DIN EN 16158:2012-05 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 327 “Animal feeding stuffs Methods of sampling and analysis” (Secretariat: NEN, Netherland

5、s). The responsible German body involved in its preparation was the Normenausschuss Lebensmittel und landwirtschaftliche Produkte (Food and Agricultural Products Standards Committee), Working Committee NA 057-03-03 AA Futtermittel. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16158 February

6、2012 ICS 65.120 English Version Animal feeding stuffs - Determination of semduramicin content -Liquid chromatographic method using a “tree“ analytical approach Aliments pour animaux - Dosage de la semduramicine - Chromatographie liquide utilisant une approche analytique en arbre Futtermittel - Besti

7、mmung des Semduramicingehalts - Flssigkeitschromatographisches Verfahren mit verzweigter analytischer Vorgehensweise This European Standard was approved by CEN on 30 December 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving thi

8、s European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official v

9、ersions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austr

10、ia, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdo

11、m. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16158:2012: EEN 16158

12、:2012 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Principle 44 Reagents .45 Apparatus .76 Sampling .87 Preparation of test sample 87.1 General 87.2 Laboratory sample .97.3 Test sample 97.4 Test portion 98 Procedure .98.1 Preparation of positive and negative control samples 98.2

13、Samples extraction 98.3 Filtration 98.4 HPLC analysis 98.4.1 LC-MS 98.4.2 LC-PCD-UV 118.5 HPLC determination . 138.5.1 LC-MS method . 138.5.2 LC-PCD-UV method 138.5.3 System suitability . 139 Calculation . 149.1 LC-MS method . 149.2 LC-PCD-UV method 1410 Precision 1510.1 Collaborative study. 1510.2

14、Repeatability 1510.3 Reproducibility 1511 Test report . 16Annex A (informative) Results of collaborative study 17A.1 Procedure 17A.2 Statistical analysis of results 18A.3 Example chromatogram . 22Bibliography . 25DIN EN 16158:2012-05 EN 16158:2012 (E) 3 Foreword This document (EN 16158:2012) has bee

15、n prepared by Technical Committee CEN/TC 327 “Animal feeding stuffs”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national

16、 standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been pre

17、pared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia

18、, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16158:2012-05 EN

19、 16158:2012 (E) 4 1 Scope This European standard specifies a high-performance liquid chromatographic (HPLC) method for the determination of the semduramicin content at authorized level in animal feeding stuffs 2, using mass spectrometry detection or post-column derivatization and (UV)-VIS detection

20、(hereinafter UV detection). This method is applicable to poultry feed. The limit of quantitation is 1,0 mg/kg when mass spectrometry is used for detection and 3,0 mg/kg when the detection is performed by UV with post-column derivatization. Lower limits of quantitation are achievable but this is to b

21、e validated by the user. The method allows the discrimination of semduramicin from monensin, salinomycin, narasin, maduramicin and lasalocid. 2 Normative references The following referenced documents are indispensable for the application of this protocol. For dated references, only the edition cited

22、 applies. For undated references, the latest edition of the referenced document (including any amendments) applies. prEN ISO 6498, Animal feeding stuffs Guidelines for sample preparation (ISO/DIS 6498) 3 Principle Semduramicin is extracted using acetonitrile with mechanical shaking during 30 min. Th

23、e extracts are filtered through 0,2 m Nylon filters. Semduramicin is determined by reverse-phase liquid chromatography using electrospray (ESI) single quadrupole mass spectrometry detection in single ion monitoring (SIM) mode (LC-MS) 4 or using post-column derivatization with dimethylaminobenzaldehy

24、de (DMAB) and spectrophotometric detection at 598 nm (LC-PCD-UV) 5. If the detection used is ESI-MS the quantitation is performed through a standard addition approach. When LC-PCD-UV is used the quantitation is performed through external standard calibration. 4 Reagents Use only reagents of recogniz

25、ed analytical grade, unless otherwise specified. 4.1 LC-MS. 4.1.1 Water, HPLC grade, or equivalent (e.g. Milli-Q purified water). 4.1.2 Acetonitrile, HPLC gradient grade, minimum 99,9 % purity. 4.1.3 Methanol, HPLC grade or hypergrade LC-MS. 4.1.4 Ammonium formate, HPLC grade. 4.1.5 Mobile phase. 4.

26、1.5.1 Ammonium formate solution, c = 20 mmol/l. Accurately weigh 1,25 g to the nearest 0,01 g of ammonium formate (4.1.4) into a 1 000 ml volumetric flask. Dissolve in water (4.1.1) and make up to 1 000 ml of volume with water. Prepare fresh solutions monthly. DIN EN 16158:2012-05 EN 16158:2012 (E)

27、5 4.1.5.2 HPLC mobile phase. Mix methanol (4.1.3) and ammonium formate solution (4.1.5.1) in proportion of 90+10 (v+v). Filter under vacuum using a solvent filtration system (5.11) and Nylon filters (5.13). 4.2 LC-PCD-UV. In addition to the reagents 4.1.1, 4.1.2, 4.1.3 and 4.1.4: 4.2.1 Sulphuric aci

28、d, minimum 98 % purity. 4.2.2 Dimethylaminobenzaldehyde (DMAB), minimum 99 % purity. 4.2.3 Formic acid, minimum 98 % purity. 4.2.4 Mobile phase. 4.2.4.1 Post-column reaction reagent. In a 500 ml volumetric flask (5.7) add first about 250 ml cold methanol (4.1.3) then 15 ml sulphuric acid (4.2.1). Di

29、ssolve 15 g DMAB (4.2.2) in the mixture. Cool down and make up to 500 ml with methanol (4.1.3). Filter under vacuum using the equipment in (5.11) and a membrane filter (5.12). Store in a refrigerator (from +2 C to + 8 C). This reagent is stable for 28 days. NOTE The methanol used for preparing the p

30、ost-column reaction reagent should be kept refrigerated (from +2 C to +8 C). 4.2.4.2 Ammonium formate solution, c = 100 mmol/l at pH = 3. Accurately weigh 6,30 g to the nearest 0,01 g of ammonium formate (4.1.4) into a 1 000 ml volumetric flask (5.7). Dissolve in 900 ml water (4.1.1). Adjust the pH

31、to 3,0 using formic acid (4.2.3) and make up to 1 000 ml with purified water. Prepare fresh monthly. 4.2.4.3 HPLC mobile phase (solvent blank). Mix methanol (4.1.3) and ammonium formate solution (4.2.4.2) in proportion of 90+10 (v+v). Filter under a vacuum using a solvent filtration system (5.11) an

32、d Nylon filters (5.13). 4.3 Reference standards LC-PCD-UV method. WARNING Avoid inhalation of and exposure to the toxic standard materials and solutions thereof. Work in a fume-hood when handling the solvents and solutions. Wear safety glasses and protective clothing. Declaration of purity is requir

33、ed for each lot of reference standard. 4.3.1 Semduramicin sodium standard, minimum 93 % purity expressed as semduramicin. NOTE Available from Phibro Animal Health Corporation, Third Floor 65 Challenger Road Ridgefield Park, NJ 07660-2103 USA. This information is given for the convenience of users of

34、 this European Standard and does not constitute an endorsement by CEN of the product named. Equivalent products may be used if they can be shown to lead to the same results. 4.4 Reference standards LC-MS method. In addition to the reference standard 4.3.1: DIN EN 16158:2012-05 EN 16158:2012 (E) 6 4.

35、4.1 Nigericin sodium standard, minimum 98 % purity to be used as internal standard (I.S.). NOTE Available from Calbiochem, A Brand of EMD Biosciences, Inc. 10394 Pacific Center Court, San Diego, CA 92121 USA. This information is given for the convenience of users of this European Standard and does n

36、ot constitute an endorsement by CEN of the product named. Equivalent products may be used if they can be shown to lead to the same results.” 4.5 Standard solutions. Protect all standard solutions from daily light. 4.5.1 Semduramicin stock standard solution, ca. 1 mg/ml. Accurately weigh 10 mg to the

37、 nearest 0,1 mg of semduramicin sodium standard (4.3.1) into a 10 ml volumetric flask (5.7). Note down the exact weight of semduramicin sodium. Dissolve in methanol (4.1.3) and make up to 10 ml with methanol. Store at -20 C and protected from light. Prepare freshly every 3 months. Determine the expe

38、rimental concentration of the semduramicin stock solution using the reference standard purity value provided by the supplier expressed as semduramicin using Equation (1). PmCs=10(1) where Csis the experimental concentration of semduramicin in the stock standard in mg/ml; P is the purity of the semdu

39、ramicin standard expressed as semduramicin given by the supplier in percent e.g. 0,934; m is the weighed mass of semduramicin sodium standard (4.3.1) in mg. 4.5.2 Nigericin sodium stock standard solution (for the LC-MS method), ca. 1 mg/ml. Accurately weigh 10 mg to the nearest 0,1 mg of nigericin s

40、odium standard (4.4.1) into a 10 ml volumetric flask (5.7). Note down the exact weight of nigericin sodium. Dissolve in methanol (4.1.3) and make up to 10 ml with methanol. Store at -20 C and protected from light. Prepare freshly every 3 months. Determine the experimental concentration of the nigeri

41、cin sodium stock solutions using the reference standard purity value provided by the supplier using Equation (2). PmCn=10(2) where Cn is the experimental concentration of nigericin sodium in the stock standard in mg/ml; P is the purity of the nigericin sodium standard given by the supplier in % e.g.

42、 0,98; m is the weighed mass of nigericin sodium standard (4.4.1) in mg. 4.5.3 Semduramicin intermediate standard solution (for the LC-MS method), ca. 100 g/ml. Accurately pipette 1,0 ml of the semduramicin stock standard solution (4.5.1) into a 10 ml volumetric flask (5.7). Make up to 10 ml with ac

43、etonitrile (4.1.2). Store at -20 C and protected from light. Prepare fresh intermediate solutions monthly. DIN EN 16158:2012-05 EN 16158:2012 (E) 7 4.5.4 Nigericin sodium intermediate standard solution (for the LC-MS method), ca. 100 g/ml. Accurately pipette 1,0 ml of the nigericin sodium stock stan

44、dard solution (4.5.2) into a 10 ml volumetric flask (5.7). Make up to 10 ml of with acetonitrile (4.1.2). Store at -20 C and protected from light. Prepare fresh intermediate solutions monthly. 4.5.5 Semduramicin spiking solution (for the LC-MS method), ca. 2 g/ml. Accurately pipette 200 l of the sem

45、duramicin intermediate solution (4.5.3) with an appropriate automatic pipette (5.6) into a 10 ml volumetric flask (5.7). Make up to 10 ml with acetonitrile (4.1.2). Store at -20 C and protected from light. Prepare fresh spiking solutions weekly. 4.5.6 Nigericin sodium spiking solution (for the LC-MS

46、 method), ca. 2 g/ml. Accurately pipette 200 l of the nigericin sodium intermediate solution (4.5.4) with an appropriate automatic pipette (5.6) into a 10 ml volumetric flask. Make up to 10 ml with acetonitrile (4.1.2). Store at -20 C and protected from light. Prepare fresh spiking solutions weekly.

47、 5 Apparatus Usual laboratory apparatus and, in particular, the following: 5.1 LC-MS method HPLC system consisting of the following: 5.1.1 Pump, pulse free, flow capacity 0,1 ml/min to 2,0 ml/min. 5.1.2 Injection system, manual or autosampler, with a loop suitable for 10 l injections. 5.1.3 Single q

48、uadrupole mass spectrometer or triple quadrupole mass spectrometer used in the MS configuration able to operate in a mass range at least between 200 m/z to 1 000 m/z. NOTE For the MS detector the vacuum should be as stable as possible to ensure satisfactory repeatability. The system should therefore be pumped at least 48 h before starting the measurements. 5.1.4 Computer data system. 5.