DIN EN 16069-2015 Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification German version EN 16069 2012+A1 2015《建筑物隔热产品 聚乙烯泡沫(PE.pdf

《DIN EN 16069-2015 Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification German version EN 16069 2012+A1 2015《建筑物隔热产品 聚乙烯泡沫(PE.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16069-2015 Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification German version EN 16069 2012+A1 2015《建筑物隔热产品 聚乙烯泡沫(PE.pdf（51页珍藏版）》请在麦多课文档分享上搜索。

1、April 2015Translation by DIN-Sprachendienst.English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 9

2、1.100.60!%B3“2311658www.din.deDDIN EN 16069Thermal insulation products for buildings Factory made products of polyethylene foam (PEF) Specification;English version EN 16069:2012+A1:2015,English translation of DIN EN 16069:2015-04Wrmedmmstoffe fr Gebude Werkmig hergestellte Produkte aus Polyethylensc

3、haum (PEF) Spezifikation;Englische Fassung EN 16069:2012+A1:2015,Englische bersetzung von DIN EN 16069:2015-04Produits isolants thermiques pour le btiment Produits manufacturs en mousse de polythylne (PE) Spcification;Version anglaise EN 16069:2012+A1:2015,Traduction anglaise de DIN EN 16069:2015-04

4、SupersedesDIN EN 16069:2013-03See start of applicationwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 51 pages04.15 DIN EN 16069:2015-04 2 A comma is used as the decimal marker. Start of application The start of application of this stan

5、dard is 2015-04-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further i

6、nformation, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 16069:2013-03, may be used in parallel with this standard during a specified transition period where such has been laid

7、down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 16069:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible G

8、erman body involved in its preparation was the DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-60 AA Wrmedmm-stoffe (SpA zu CEN/TC 88 und WG 1 bis 9, WG 12 bis 21, ISO/TC 61/SC 10, ISO/TC 163 (teilweise), ISO/TC 163/SC 1 und SC 3). T

9、his standard includes Amendment A1 approved by CEN on 2014-12-15. Amendment 1 modifies EN 16069:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The start and finish of text introduced or alte

10、red by amendment is indicated in the text by tags ! and “. This document is part of a package of interrelated standards for the specification of factory made thermal insulation products. Amendments This standard differs from DIN EN 16069:2013-03 as follows: a) an addition to the Foreword has been in

11、troduced; b) Subclause 3.2 “Symbols, units and abbreviated terms” has been amended; c) Subclause 4.3.10.2 “Thickness dL” has been amended; d) Subclause 4.3.13 “Release of dangerous substances” has been added; e) Clause 7 “Assessment and Verification of the Constancy of Performance (AVCP)” has been r

12、evised; f) Clause 8 “Marking and labelling” has been modified; g) Annex B “Product type determination (PTD) and factory production control (FPC)” has been modified; h) Annex E “Additional characteristics” has been modified; i) Annex ZA “Clauses of this European Standard addressing the provisions of

13、the EU Construction Products Regulation” has been added. Previous editions DIN EN 16069: 2013-03 EN 16069:2012+A1February 2015 ICS 91.100.60 Supersedes EN 16069:2012English Version Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification Produits i

14、solants thermiques pour le btiment - Produits manufacturs en mousse de polythylne (PE) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Polyethylenschaum (PEF) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by

15、CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand

16、ards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and no

17、tified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,

18、Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form a

19、nd by any means reserved worldwide for CEN national Members. Ref. No. EN 16069:2012+A1:2015 EEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 16069:2012+A1:2015 (E) 2 Contents Page Foreword 5 1 Scope 7

20、 2 Normative references 7 3 Terms, definitions, symbols, units and abbreviated terms .9 3.1 Terms and definitions .9 3.2 Symbols, units and abbreviated terms . 10 3.2.1 Symbols and units used in this European Standard 10 3.2.2 Abbreviated terms used in this European Standard: 12 4 Requirements 12 4.

21、1 General . 12 4.2 For all applications . 12 4.2.1 Thermal resistance and thermal conductivity . 12 4.2.2 Length and width 13 4.2.3 Thickness 13 4.2.4 Squareness 14 4.2.5 Flatness . 14 4.2.6 Reaction to fire of the product as placed on the market 14 4.2.7 Durability characteristics . 15 4.3 For spec

22、ific applications 15 4.3.1 General . 15 4.3.2 Dimensional stability 15 4.3.3 Compressive stress or compressive strength 16 4.3.4 Tensile strength and elongation in length and width . 16 4.3.5 Point load . 17 4.3.6 Compressive creep . 17 4.3.7 Water absorption 17 4.3.8 Water vapour transmission . 17

23、4.3.9 Dynamic stiffness . 18 4.3.10 Compressibility . 18 4.3.11 Sound absorption . 19 4.3.12 Width length and thickness of preformed products . 19 4.3.13 Release of dangerous substances 20 4.3.14 Reaction to fire of the product in standardized assemblies simulating end-use applications . 20 4.3.15 C

24、ontinuous glowing combustion 21 5 Test methods . 21 5.1 Sampling 21 5.2 Conditioning 21 5.3 Testing . 21 5.3.1 General . 21 5.3.2 Thermal resistance and thermal conductivity . 21 6 Designation Code . 23 7 Assessment and Verification of the Constancy of Performance (AVCP) . 24 7.1 General . 24 7.2 Pr

25、oduct Type Determination (PTD) . 24 7.3 Factory Production Control (FPC) 24 8 Marking and labelling . 25 DIN EN 16069:2015-04EN 16069:2012+A1:2015 (E) 3 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 26 A.1 General . 26 A.2 Input data 26 A.3

26、 Declared values . 26 A.3.1 General . 26 A.3.2 Case where thermal resistance and thermal conductivity are declared . 26 A.3.3 Case where only thermal resistance is declared . 27 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) 28 Annex C (normative) PEF m

27、ultilayered insulation products 31 C.1 General . 31 C.2 Requirements . 31 C.2.1 For all applications 31 C.2.2 For specific applications 32 C.3 Test methods . 32 C.4 Evaluation of conformity 32 Annex D (informative) Examples for the determination of the declared values of thermal resistance and therm

28、al conductivity for a product or a product group 33 D.1 Case where both thermal resistance and thermal conductivity are declared . 33 D.2 Case where only thermal resistance is declared . 34 Annex E (informative) Additional properties 36 E.1 General . 36 E.2 Deformation under specific compressive loa

29、d and temperature conditions 36 E.3 Compression modulus of elasticity . 36 E.4 Bending strength . 36 E.5 Apparent density . 36 E.6 Compressive stress at defined deformation 37 E.7 Air flow resistivity 37 E.8 Cyclic load behaviour . 37 E.9 Shear behaviour 37 E.10 Peel strength 37 Annex ZA (informativ

30、e) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 39 ZA.1 Scope and relevant characteristics . 39 ZA.2 Procedures for AVCP of factory made polyethylene foam products . 40 ZA.2.1 Systems of AVCP 40 ZA.2.2 Declaration of Performance (DoP) . 44

31、ZA.3 CE Marking and labelling 47 DIN EN 16069:2015-04EN 16069:2012+A1:2015 (E) 4 Bibliography . 49 Tables Table 1 Level and classes for dimensional tolerances . 14 Table 2 Dimensional stability under specified temperature and humidity conditions 16 Table 3 Classes for thickness tolerances . 18 Table

32、 4 Levels for compressibility 19 Table 5 Levels for dimensions of preformed products . 20 Table 6 Test methods, test specimens and conditions. 22 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 27 Table B.1 Minimum number of tests for !PTD“ and minimum

33、product testing frequencies . 28 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 30 Table D.1 test results . 33 Table D.2 R test results 34 Table E.1 Levels of bending strength . 36 Table E.2 Levels for compressive stress at a defined deformation . 37 Table E.3

34、 Test methods, test specimens, conditions and minimum testing frequencies . 38 Table ZA.1 Relevant clauses for factory made polyethylene foam and intended use . 39 Table ZA.2 Systems of AVCP . 41 Table ZA.3.1 Assignment of AVCP tasks for factory made polyethylene foam products under system 1 for rea

35、ction to fire and system 3 (see Table ZA.2) 41 Table ZA.3.2 Assignment of AVCP tasks for factory made polyethylene foam products under system 3 (see Table ZA.2) 43 Table ZA.3.3 Assignment of AVCP tasks for factory made polyethylene foam products under combined system 4 for reaction to fire and syste

36、m 3 (see Table ZA.2) 43 Figures Figure ZA.1 Example CE marking information of products under AVCP system 1 and system 3 . 48 DIN EN 16069:2015-04EN 16069:2012+A1:2015 (E) 5 Foreword This document (EN 16069:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials

37、 and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by Novembe

38、r 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 16069:2012“. This document includes Amendment 1 a

39、pproved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of E

40、U Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ !Amendment 1 modifies EN 16069:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the

41、 Construction Products Regulation (CPR). This amendment introduces: a) an addition to the foreword; b) an addition in 3.2; c) an addition in 4.3.10.2; d) a new subclause 4.3.13; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex B; h) modification of Annex E; i) a new

42、 Annex ZA.“ This document is one of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appropriate. The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy

43、used and emissions made during the production and disposal processes. DIN EN 16069:2015-04EN 16069:2012+A1:2015 (E) 6 According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bu

44、lgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

45、Turkey and the United Kingdom. DIN EN 16069:2015-04EN 16069:2012+A1:2015 (E) 7 1 Scope This European Standard specifies the requirements for factory made polyethylene foam (PEF) products, with or without facing or coating, which are used for thermal insulation of buildings. The products are manufact

46、ured in the form of boards or rolls or other preformed ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulating systems and composite

47、 panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be fou

48、nd in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,5 m2K/W or a declared thermal conductivity greater than 0,050 W/(mK) at 10 C are not covered by this European Standard. This standard does not cover in situ insulation products and products inten

49、ded to be used for the insulation of building equipment and industrial installations (covered by EN 14313). Further excluded are non-foamed materials such as bubble films, foils etc. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest editi